So here it is out of the box. I took the instruction manuals out and the tools with the allen keys and the optional pinion gear and some extra parts for extra gear mesh. So there we are. This is the car itself um. I took the plastic wrapper off just now and i cut the zip ties off, so we could go through this smoothly, so i wouldn’t need to get a pair of scissors in one hand, cut it off so let’s just try to do this. One handed pull the car out and kick the box out of the way there. We are the car itself i’m, going to give you guys a little montage later, but in the end of the video there will be a montage and there’ll be a link in the description of where you can get this rc car. So now let’s just pull the body clips out how to typically do it. Now. Just now i took it out of the box. There was one little flaw. Now the body was hitting the wheels. I had to cut a little bit of the body off just right. There and i cut the other side, so it looks like it looks like it’s stuck looks exactly the same, so that’s, the body last don’t just bash blast. Sorry, if it’s upside down for you guys, but so here’s a little look of how the car is laid out so here’s, where you put the esc, the receiver box, is where you put the receiver now.
The good thing is the entire piece comes out. So that’s really good it’s really easy to fit your esc. Your antennas, your receivers on, tires, feel good there’s, no other way to express how it feels. So. It feels good two battery compartments, the drive, shaft yeah motor mount and yeah that’s. Basically, all and um let’s go through some specs and stuff, just in case you guys were wondering what motor to fit in what battery size. So after i open this zip tie or this zip ziploc bag i’m going to come back to you so guys we opened the ziploc bag with two hands, not one handed so here’s like the body mounts and bits and bobs here and there and here’s the washers Extra gear mesh that’s on my foot, that’s what’s in the way here’s your tools, some allen, keys, yep that’s, the things you’ll need for the car assembly. Now this is the optional gearing optional high speed gear right here, so how it looks onto the specs, so the specs. Now, if you guys want to get one of these cars here’s the batteries to get the motor size, if you guys want to buy one. So just pause the video and look at this chart, so you know what battery size to get what motorcycles to get so just pause. The video give you three seconds there. We are sorry for the bad audio quality, so you guys see the stickers on the top.
Yes, on the top and another page of warnings and stuff it’s involved the main instruction manual first page. Second page yeah you’ll need a radio esc, a motor, a servo and two 3s batteries or 4s or 2s, but in this case i’m going to run it on 6s and then a test because i’ll be using a max 8 esc and a 4274 hobbyking motor. So um here’s the tools you’ll need up. You can pause the video, okay, some instructions and um here how to adjust. Just these uh, the shocks and stuff add how to add grease into the gearings things like that and uh on to the last page, like the second last page or the last page, there would be a page of the exploded view of the car, so 775 chassis Body a whole lot of stuff – i can’t name all of it, but you guys can take a look so um that’s. Basically all i forgot here in the next video we will be adding electronics, servos receivers and get this thing up to 120 kmh. I don’t know how fast it will go because i didn’t try it yet and the electronics hasn’t arrived yet. Maybe it’ll take three months, maybe two months, maybe one week, maybe i don’t know how long i’m arriving because i’m on back order, so here’s the car itself. A little montage for you guys, but thanks for watching smash that, like button and i’ll, leave all the things i use in the description below, except for the efcs, the servos, the receivers that will be linked in the next video and see ya.