This is hot racing. 17 millimeter hubs, um 10, mil offset let’s check it out just to see how it look with these hoon wheels on here i’m going to see what it looks like with like the limitless wheel and the infraction wheel, just to have a comparison to see what it Looked like um and just a wheel option type of deal all right. Let me go ahead start with the wheels get those guys off. Let’S just see how it would look guys. So you got the 14 millimeters in here all right, all right, so let’s take the body off as well and then pretty much go here, so they have um grub screws in there. That holds that in there so i’m gon na pull those out. I believe that’s what’s required to install the 17 millimeters, all right sliver it out real, easy, real nice, and then you have the pin all right. You guys see that came out put that right in there, so it doesn’t go anywhere and then i’m gon na pull helps out the bag guys. You can see here that plus 10 millimeter offset. This is what the hot racing 17 millimeter of adapters look like all right. They have from the tool, come with four uh pins here and then the locking nuts that go on. I really like this design, it’s pretty cool. I had it with my um other cards. Like my wrestler um speed car two wheel, drive wrestler.
I really like these the setup that they have so i’m gon na. Do the front two for now just to show different wheels on each side, all right. So at the pin just slide it right through slide it right through there, then you have 17 millimeter slide it right on. Take the cap off and then that’s the way you would slide this tool over it all right. So i stay here like that. Get the tools out the allen key as provided and that’s, where you use to screw it on through the inside. It goes over the threads of the um axle, so it’s like you’re screwing on uh securing the tire onto the axle, but you’re actually just putting the pin on there so that now it is on there all right. Let me do the other side see how that’s done rotate it. So you see that allen key another grub screw. I’M. Sorry slide out came out as well. Just like that real easy all right, keep those together slide your new pin in there all right slide. Your new hub adapters on it then the locker. I could just use some thread lock if you like all right, that’s, pretty much it for installing the 17 millimeter it’s pretty easy. So what i’m going to do is i’m going to put the um infraction i mean this is a limitless wheel, which i get the right. One limitless wheel on the front all right and then this one here is the infraction all right.
Just put it on. So you can see what i look like and both those wheels on there all right. So you put your 17 millimeter and so i know um the previous ones. I had like these um these tub adapters before this mill here would be open. So if that um, the lock and washer did come loose, it would fly out, but with this it would stay on the inside, which is pretty cool all right, so that’s that and then that one is on guys so that’s the front 17 millimeters on there let’s Take a look, it looks a little different, just away 17 mil 17 mil. This is the homes i mean the hoons with the attraction and limitless wheels, looks pretty good. You can adjust your cambers and i guess that if you like um, i am going to put the rear on here as well off camera. Just because have a look and see what it looks like all right guys there you have it got the install done, got the 17 millimeter adapters done. I have it with limitless wheels on this side, and then these are the infraction wheels on this side. All right. I really like it with the for me: i like it, the look better with the fraction style wheels mixed up a bit. This is a pretty slick, look too, but i think i like the infraction style better, but this is a 17 millimeter. Adapter um will converge.