You won’t miss out on any of our future rc adventures and in today’s adventure. It is part two of our four part build series in part. One amber built up the axles in part two she’s gon na build up the chassis. Put the wheels on the shocks on and the electrics and part three she’ll be customizing the body coming it a cool paint, job and, in part, four. The final part of this build series will be taken out for its first run and give you our full review of this g500 guys don’t panic. If you missed part one, you can watch it right now before you watch this. One we’ll put a link in the youtube card and we’ll put a link in the description down below now before i ever jump into the build. The electric she’s going to be using today is the hobbywing crawler brushed 80 amp, esc and she’s going with flysky, noble transmitter and receiver. Now this transmitter is our favorite that we own it’s a pretty reasonable price. We made a video on it if you haven’t seen it go watch it afterwards. We’Ll leave a link to the video of this remote controller and links to all these products down below. If you’re interested right, guys follow along with me and remember, there’s going to be a lot of cards, so pause along the way follow along with the instruction manual and make good use of the scale provided.
Music. Music pay close attention to your shock towers and make sure they’re in the correct orientation Music. Unfortunately, i was missing one shock tower from the pack, but we’ll talk about that later. Music is Music pay close attention here when reading your instruction manual when you’re, attaching the motor to the motor mounts Music check it smooth, if not the gear mesh may be too tight. Music is Music Applause, Music Applause, Music, Music, Music. You congratulations. You’Ve completed part. Two of this four part build series Music. Well, i got ta say i am very impressed with how amber’s going with this bill she’s doing a great job. So if you haven’t already go and hit that like button for her, it really will put a huge smile on her face. Now. We’Re going to go over a few points that we discovered in today’s, build starting with point one, and that is that we’re missing a path. Yes that’s right. Unfortunately, we are missing one of the shop towers it wasn’t in the bag. It was nowhere to be seen so we did reach out to make a fire the company that did send us this truck and they got back to us right away and said guys we’re going to send you out that part right after chinese new year. So hopefully, we’ll have in time for part three of this build number two joe insisted on putting some oil into one of the shocks, and that was not a good idea.
Don’T do it. It will just leak everywhere and point three: is that that pinion be careful? The middle was a little bit soft when amber screwed in that grub screw. She did actually strip away a little bit of the pinion itself, and then we put a little bit of loctite on there and it got in there. Hopefully, that will hold it in place when we take it out for its first run, but just be aware of that when you’re screwing, that grub screw into the opinion and don’t forget about the two giveaways that we’re running at the moment. If you have no clue what i’m talking about we’ll leave, some links in the description down below with more information, uh we’ll also be announcing the winner of the amine hobbies vouchers on our instagram page on the 28th of february. You guys have been asking us in the comments joe amber. Do you have any merch? Well, very soon we will we’re going to be launching our website www.thearcyqueries.com, where we’re going to have all kinds of merch. We have t shirts, hoodies socks, fanny packs stickers. You don’t want to miss that website’s gon na be launched on the first of march. We’Re gon na have some launch sales so put on your calendar, so you don’t miss out now in order to not miss out on part three, where i give this car a paint job and an epic makeover make sure you go ahead and you hit that subscribe Button, if you enjoyed this video, give it a like and if you didn’t give it a like anyway, make sure you’re staying safe out there on your rc adventures and remember guys we’re there.