End point all the way, adjusted here on the radio. When i was uh looking at some things, i noticed that it was not set all the way to 10, so we weren’t even getting the full burst with this thing, so our endpoint adjustments. This is, if you want to be able to turn it down, for your kids, to drive it or back up to 10. what’s going on you guys, tony here ccxrc and we’re back out coming at you with the mad van again. This is the ve brushless version of this thing. Uh we did have a little issue with it. Last time we ran it down to digger’s dungeon. To tell you guys about that. The only thing that’s wrong with it is one of the front teeth on the front. Diff chipped off so it’s missing one tooth that’s. What the click is. I ordered a new one. I think it was like 13 bucks it’s on its way here. We’Re gon na install it when we get it but we’re just gon na keep bashing it regardless. Right now, it’s so much fun, it’s perfect for the backyard, especially right now as we’re. Getting ready to move – and all i can do is throw out some ramps and just kind of small area bash with it, and so this can show some other people what it might be like if you don’t have a big yard, if you’re just using plastic ramps.
Whatever, how much fun you can have with the mad van it’s, a ripper guys, especially when you set it all the way up to 10., so got a little bit more speed from it and which is shocking because it was already so fast on 2s, you saw It do the wheelie there at the beginning, it’s wicked fun, guys let’s go bash. This thing, our little micro crawler track is gone. Man 2s. This thing rips all right, let’s go get. Some jumps got my stacks of them in here getting attacked by all the flies. Applause yeah five should be good for snakes instead of two of them right here. Boom boom, all right guys. Well, i wasn’t rolling for a bunch of stuff there talk about how well this thing handles lots of great control in the air uh. It does have so much power and it’s wet back here that it can get a little slick and sliding back and forth like this i’m making it do it uh it’s all about having good throttle control. Oh i’d, save that and then i over over punched it anyway to prove my point: it has some some definite ups for 2s trucks as far as uh speed, but you can definitely throttle control and have all kinds of great run with it. You can actually use a break and free to your advantage to line things up. You can see a slap wheeling. We actually did a backflip with it a minute ago, which, unfortunately didn’t record.
We landed a couple of them Music, clean like that, but perfect, landing like that. There we go uh. We had them a little bigger than that, but you can definitely do it. These aren’t very big jumps. My battery may be disconnected there. It is. I have a little uh adapter to go to deans it’s a little bit janky, so it on the right hit. I can lose power and it’s weird it’s, not all powers i still can steer, but it won’t drive. So it gives the esc a weird reading. Anyway. You can see how well i’ve got control of this thing and basically get it to go where i want how i want in the air as well. You have enough power on 2s even to really throttle control. It slap wheelie whip it around. Oh, i tried this Applause use throttle to get out of that it didn’t work. I will say that i think i think i did something Applause. Oh we lost front. Two wheel drive now landed. We have to check my different cups, definitely harder to control. Two wheel. Drive man, i wish i had shown that whole beginning part that just record all the abuse we gave this thing because we really pounded it with those front flips for a good bit: Applause, Music, it’s, a bummer. I was trying to redo so much of what i’d done, given a lot of unneeded and unnecessary hits, but we’ll keep it fixed up.
We love this thing and this platform, so we’ll just keep giving it some abuse. Yeah it’s got ta, be with that dip. Oh i lost my drive. Shaft is what i did. I popped it out, that’s easier to fix, it’s, just missing a drive shaft. So on that weird front hit, it must have must have pulled out flexed its way out. Okay, now i just have to inspect the yarn see if i can find it that’s easier to fix, but now we’re, basically driving a two wheel, drive three wheel, trying to drive not much power going to the front, though there it is found it so right after It had done that front flip to fail. This must have come out so that’s easier to fix that’s, not really broken that just popped out. So the one thing about this, i like to say, it’s, made out of stretch, armstrong plastics. You can see how much these twist and so that much flex allows it to pop that out, almost so easy to get in here and get this out and replace that so we’ll get that done, but uh yeah what a fun basher. Guys again! My apologies that i missed. Like eight minutes of footage, i thought i was rolling and talking telling you how great it was doing these cool front flips in slow motion for you talking about how the dirt is here, being all wet and uh, because we just had rain an hour ago and How it was a little bit sliding, but very controlled, still and uh, none of it on here, because uh i it was in photo mode for some reason on my phone, so i hit the button and it took a picture instead of rolling video, so total fail On my part, this thing is still a thumbs up.
We did lose that dog bone, but man for the rip i gave it today and that really hard front flip stuff, normally breaks on cars on front flips and crashing on front flips. This took it. It popped down that dog bone, but we’ll stick it back in there be good to go. I do have to fix that diff that did ship in the very beginning sounds like it’s. Something that’s happened to other people with this platform in general, when you go brushless because of that extra power and speed and landing potentially on throttle – or you know, start stopping too hard with that much speed behind it. So it did chip we’re gon na put a new one on there, we’ll see how long that lasts, i’m, hoping it was just a fluke piece and whatever the metals that were in it were, you know, for whatever reason had powder or something there didn’t form correctly. That’S what i’m hoping, but you never know, um, but so far i’ve been having a blast with this thing and i still love the original brush. One, like i said, they’re hard to get. You know people been buying these up because of how much fun the originals were, and so you know it’s going to be a little while before these are back in stock places, but uh keep your eyes peeled guys for 280 it’s a steal anyway. We’Ll see you guys have fun, are seeing and there you have it guys, all cleaned up after the bash got it.