Look at that guy right there, that color is actually really nice in person really old school. Looking the wheels really nice stainless steel. Looking or you know, unpau, you know polished wheel, look they’re, not chrome they’re, like a polished. Look so really nice really nice. Now the bumper up front and the grille. Those are chrome. So let’s get this sucker out of here and get you more detail into this i’m, not sure if those are longer links or just the exact same for replacements, get a body clip and an allen key tool and four batteries for the controller. Godt, i guess the rift came with that too, and that’s instruction manual here’s, your usb charger. Remember, i don’t recommend these that much. I recommend you just get yourself a hobby grade, charger it’ll charge faster. You can play longer this one right here will make you wait longer and they’re very unsafe. They don’t charge that well. Some of them are also defective out the box so be careful with these always watch while charging with these, and you have some accessories. Another thing the riff doesn’t come with check that out, and you can only you could also just use the rear rail bars. If you don’t want to put the the roll bar and stuff you don’t want to put the fake lights on there at least that’s an option, ret cool, i like it and, Selvfølgelig, this transmitter, you guys all know and love.
It is really a good transmitter for an rtr, ingen vittighed, det er, really good range, really good quality feel not bad. Definitely a good remote from the micros check that out the convenience of two body pins up front and you flip the lid up to reveal your 1967 chevy c10 licensed body. Everything underneath it’s, the same thing: that’s all the sax24s. This one has a nice rear, bumper that this one comes with in the front bumper and on the front grille. You can put actual lights in the headlights up there, so i think i’m gon na either transfer these up there or i’m gon na grab the one from my deadbolt and just put more lights on this one and take the lights off the deadbolt. For now fully licensed body for a hundred and twenty dollars 119.99 – and you have this sweet guy – oh my gosh, det er, so detailed and so nice, and i am mad at axial about that other truck. But boy. I cannot be mad about this. One look at the wheels yeah some method wheels right there. There you go nice little details, chevrolet axial parts and service come on this. One right here is definitely a good truck for your money. Så, Ja, i could definitely recommend these ones. You guys want to see this out on the trail. Let me know, but i don’t know, if i’m going to keep this one as just an indoor one, because these ones are tiny and i do like them that’s why? I do have another one right here, but i think this one’s gon na be my indoor truck it’s just so nice.
Maybe if i keep it on my desk and on some plastic rocks, i won’t scratch it up. Åh ja, before i forget to mention those four screws right there with the washers are what you need to install the little bar in the back. I didn’t put the lights on it because i don’t like the fake lights really, so i just put the little bar on there because i think it still looks cool Music. So what do i think about axial’s little 24th scale beasts. These things are bad to the bone. I mean you can’t deny the performance they have they’re great. The size is small, the speed is slow, but for indoor crawling and maybe at your little campsite, if you find a little tiny rock pile by your campsite, this thing will give you hours of fun. The batteries are small, so you know get some replacements you’re going to need more batteries to run this thing, because one battery is not going to be enough to feed your crate for the crawl and just in case it is your first rc car or axial. This is your throttle in reverse, and this is your steering right here and they’re full proportional. Both are all in reverse and steering and those the channel three right there on the very top left corner that’s, just a channel that’s extra optional use right there, for maybe something you’re gon na add on to this car, and if you see right there channel one To the right of it, that’s just to reverse or normal, your steering, if your steering is reversed, that one that you see labeled dr right there that one right there is to limit the throw of your steering if you don’t want it to be full on steering And you want to limit the throw a little bit and to the left of that you’re, going to see that l m and h that’s for low speed, medium speed and high speed that’s going to be your rates for your speed on this truck.
So you could change how fast or how slow it is. I just like leaving on high these things are slow anyway, but if you let somebody borrow it, that may not know how to use these properly. You might want to put it on the medium or low settings, so they don’t just damage and bind it somewhere and just damage your drive, shafts or drive train parts, and you see that channel one thing right there that says zero to three on both sides: that Right there is your trim for your steering, so if it’s turning left or turning right, you’re gon na set that dial to counter that, and you have your bind button and a nice led to show you that your controller is on. So you don’t leave it on and your on and off switch and that’s pretty much it for this transmitter. Oh man, this truck is sweet. It looks good let’s see if we can climb up this big tire. So yes, i’m upgraded for this right here too i’m. Probably going to do the same as this one, some wheel, weights i’m, not sure if i’m going to change the tires, maybe try to figure out a way to get some weights in there and put lights in the actual headlights. Maybe rob them from this guy right here from now. Godt, here you guys go it didn’t, take long for me to do it right. I went ahead and put the leds in the light.
Buckets look at that that looks way better. I think what do you guys think it’s nice, this one came with these black wheels right here, they’re pretty close to the diameter of that these are just a tiny bit bigger, but they are way bigger than those wheels right there. So these wheels are more to scale for a 24 Skala, it’s just all around a good 24 Skala, just too slow for the trail for me, but for anything else table wise or around the campsite or anything. These things are perfect and awesome. All right guys check out those lights one more time. Åh, they look sweet time to 3d print parts for this guy as well. Let’S see what thingiverse has for this guy all right. Lad os, just do one quick test right here to see if this thing can side hill better than the deadbolt stock. The deadbolt rolls on this thing, so let’s see what this one does: Music wheel’s off the ground and it rolls over deadbolt just for comparison. Just to show you that it makes it over this now and it used to not either stuck so here it goes i’m lifting a leg now and that’s, where the other truck tipped over. Look at that i’m, not even taking it easy the wheel weights in the wheels just keep it from tipping oops i’m, not gon na get that in frame again let’s try to go as close as we can to try to fit.
It start plugging right there and down again there you go just a little bit of mods that video was already put out so check that out. If you want to see what’s done to this, this one is going to get some mods next, alright guys.