I could recall one time: okay well and roll the star of the show so uh, 600 600. We did it 600 rcadventures and they already saw the thumbnail. So there was no point in like covering it. I know pretty much. We can cover it up. You know, don't, give you a close up. Look for a minute, I suppose so pretty we're gon na have to do a surround. Everyone'S been wondering where project large has been I've. Seen many comments. Yeah the collection video was done. Where'S project large RC, heaven yeah pretty much where it's been. I think everyone expected that we had this great truck. We did, but we just run into a brendlin. Ours had problems ours, yours whatever you want to call it. Have you had an RC with a gremlin in it before I have many times, I've had a couple. The where you can't seem to get the problem worked out, no matter what it is, hey you replace one part, some other part that's still screwing up, you go through it and yeah yeah. What what? What was your overall? What did you want to do when we found out it was bro? We have problems of the dual servos on project large, true didn't work out for us. I wanted to do away from that, but were the servos, they were a high tech team, high tech, 5765 servos, the core big giant scale, ona's on a dual servo setup.
For those I watched project large, we had the Dark Soul, dual servo setup. We had them. Centered we had the arms, there was one thing after it was like an 14 was too tight, it would burn out a servo like something would go wrong. It would burn out the circle. It wouldn't burn out one like a go over a jump hit and it would kind of twist the tires and walk the serval yeah almost like they didn't have a stop in them. Yeah pretty much. It was over pushing over their nurse. We tried mojo servos. The saver, you know yeah the gerbil saver. We switched it off and check the spring. Tension replaced electronics like three times didn't work, so how'd it go. Some people have problems with it. Some people didn't, sometimes well didn't, that's. Why we went with it. Some people did so didn't work for me ah, but there are other options out there and in fact I'm just gon na get straight to it and say Everett said Everett said. Let me take the low C yeah. You said it to me about well I'm gon na say at least in October we're talking about it at a later season. Efter det, the eight wheels eight cartwheels. You did a trireme truck a little bit after that yeah last time. I ran that we did lots of films that they didn't see that day they got ran project large yeah died that day as well, the day of the poop truck and when Wyatt was alone.
I couldn't even run mine because we note two more yeah. We drove it for a little bit before we started filming and yep, and that was it went over too many bumps locked burned out to more servos. It was weird, and so I went through six servos, that season yeah and at a buck 15 or a hundred and thirty or whatever they are Canadian each. That was too much so we canceled that, and you said, let me take it away. Let me build you something that would be amazing exactly. I believe. When I start, I leave one of your sentences to me somewhere along was my chassis. Looked like a banana what's that one yeah Helle warp is a warped chassis from the 25 foot jumps and all the stuff that we've done replaced it. We should replace the chassis right, Okay, so I'm, not blaming anybody for the servos at all, it's, just a whole. Swiggity whacked done didn't like us that truck so you did something special. We built the awesome, and I see that there is an amazing color scheme of RC sparks. There is certainly we themed it up, that's for sure that I don't even know where you want me to start. It is on the access. Rc rocket. Stand you one of these. I do best Stan in the world, yes sure, for this there's other options, but this one comes with a plate where you can access all the screws.
You'Re telling me they have a thing: work, yeah, yeah attachment to see the bottom of it yeah. That would be five degree angle easier for these guys to see you'll have to jail. Out of that, you got to get the camera in here. You light it in there. No habla yes get in let's let's cut it getting close, and as ever it says. Åh ja, yeah, Okay, so lots of partners came in on this and number one. I have had this amazing Penta body from hammy storm RC, my buddy Chris. Thank you Chris and, Selvfølgelig, thunder designs want to do an exterior wrap to kind of commemorate what project large has been all about so project large 2.0. We wanted to have the same color scheme as the RC sparks you know. Rcadventures are see sparks website. The Penta body actually allows you to take off your fender, flares or fenders pardon me here here back and back you can have an open wheel class if you want to run, but the way he's designed this to take these on or off, you can replace pieces. Like if you break one get one piece cake, he did good, hey looks killer yeah, it looks amazing, so Thunder designs. Dotnet did the rap good job got a little bit of overlap in some areas, but I think overall it looked boss. Chris de Graaff actually painted this for me and the rest is history. Come on.
I don't want to look at the body forever. I'M, like a stock, body's cool boots, cooler inside everybody wants to see up close. This could be the raddest machine on the planet. Oh wow, I got to see this for the first time yesterday. Trainee, you had this for many bucks hiding in my basement base budget project. You betcha, hey, Gå frem, give me a breakdown. What are we looking at low C roller starts off p.m. Honda craft, mostly roller 400 Pm. hobby crafts, that's right, that's, race, support your local hobby store; Okay, what we got we got frozen house mix. This is the point in the episode where we realize we are going to be talking about the vehicle, starting at the side, all the way through the back all the neat things that got done. Take 92 Vanna White, bitches, we're gon na start. Where are we gon na sit order and action? Do it serious time, Okay, serious I'm, serious serious, face only serious and faces all right. Jeg, like my truck your truck. I know whose truck is, but I like it, anyways serious, serious. Oh man, I don't, even know where to start, I need another beer cut professional go. Do it where's the red light, it's red right here, don't, you probably have to go, explain the truck. What what are they looking at? We are looking at a low c5 that we made amazing right. We already covered that now we get it show us what's up, hostiles right here: dot, stock, rims, black okay: these were the stock gray rims.
The stock gray rims covered that these are hostile, MX's dime X. This is the modified RC power that we did is right. Okay, this is what is this DDM chassis, brace, I think yeah stock chassis, brace that it's not stock. You know I'd, actually almost say turtle. Racy makes it so similar to their other parts, but DDM it's their name on it on their site. Okay, nice went with some hostile braces here again turtle racing air intake box and you feel head intake box again for oh man, don't show that an action and the turtle racing air intake box, isn't it beautiful god. What did you have for lunch? So here you can actually see that we have an OPR engine. This is the Widowmaker it's, nine point: seven horsepower. We have the victory RC pipe that was sent along from obr because they – what is this? The the exhaust manifold, actually has a wider opening? Is that correct, exactly yep that's more airflow enjoy your opening. Oh yeah there's standard size, Rar, Rar, Rar. I also sees a box whose center diff is this that's modified, RC parts again ridiculous parts. This guy is brakes. You got these are a little different here. You might not see these too often you put this out recently. These are booted brake discs. Ja, with the zip tie. Åh ja, with a zip ties, keep a little grease in there, keep it cool and a little nicer from wearing out lace, brake upgrade very nice.
Meget rar, is it just killer with a fart alone racing carrier they Bartle and let's, pin it on the fair yeah it's been around over this clutch bell inside there to have a look at this way. Meget rar, Okay. So here this is somebody asked us. Why would we do the mesh mod instead of just putting outer wears in there there's your answer yeah, especially from the other side? Well spin, it quickly yeah sexy. Look at that very nice, Meget rar. I see a different throttle. Linkage what's this yeah that's a DDM linkage again quickly right there quick release wicked wicked little gimmick there yeah. If you want to swap out the motor right or the engine, simply go ahead, demonstrate man German stray. I can't get my fingers in there right now. Okay! Godt, that was just quick as all go. Quick gets quick release right on okay underneath I also see Denton, ah Bart, along skid plate. I like this better than the full force one we had before this one actually has a bend in it. So when you come down it doesn't, Faktisk, you know bang against it right. These chassis braces are gnarly very thick one at the back kablammo. Look at that perfect in place. We snuck a ball weed into the pipe yeah ma'am, Sir. Go ahead, go pipe normally comes in raw raw steel, but we had this thing: ceramic coated at Top Gun coatings, a local store in kagra, here shop yeah.
That does ceramic coating. Why would you do that? Why would you ceramic something? Why would you ceramic it helps with the heat for one and two. It looks phenomenal yeah ceramic on the inside the flow right, so it's yeah. If you guys touch this and it helps you the flow in the heat, so it's, nice yeah it's, just good good little thing to do a little extra. Will you really notice the difference? Godt, my eyes do great last thing to put on actually let's. Do it? Man let's: do it let's get it on there check it out. We just greased around here with a bit of grease kind of messy you because we pulled it off, but it was really neat the first time right where we should put the throttle linkage back on, while we had it off yeah that's, why we took this off To get this final piece of throttle linkage in there, so you'll notice that this filter system is not the stock filter system. No it's, not the stock filter system. Tell us why Everett just goes with turtle box system. You know: it's the bajas air filter assembly it's. One of the better ones around for keeping dust and dirt on your engine. Look at that snaps together. Very very nice we'll wait to well this still the day, we're gon na run it fortunately won't be running there today inside yeah man, Nej, and even to start. This up right like right now at the time of this filming it has been winter for us drop.
You have no sub sub zero any 30 for the last couple weeks, yeah for you guys in the u.s. like minus 20. You know Fahrenheit that kind of thing or colder, so both of us look like a couple of ghosts. We haven't seen the Sun in months, we're dying to play with some of these toys. Yeah we're setting it up like the DB XL all the stuff, getting ready for this upcoming year of rcadventures yeah yeah you've got a new season, the next hundred videos until we get to 700, and we want to think about that its owner work just to even Get to 600 with some great videos, though we did together just with us to to you know when I started joining onboard yet and blast out a year and a half yeah, maybe a little longer, Sandsynligvis, and that at him that areas first time on camera was Project large, pretty much yeah wasn't that in that area, I think when we just had three truck so to Strathmore, yeah it's, definitely the first first time in yeah, oh right, right right, but now on camera in the studio, yeah, hey project, large yeah. So we revisit her yeah buddy way to go. Okay well, Uh, where we throw the thing back up there and let's. Put the lid back on, have a look at it overall, give you my overall that's Uncle Sam or trying to be serious serious time again. I'M.
Still, six hundred everyone's watching six hundred okay, so uh great job. Thank you very nice, buddy it's, very serious, and you know one of these yeah that's Rojo, that's great great, looks lost don't, even sure. What do you now I don't know I don't know. Did you have a favorite RC adventure? I have a favorite RC adventure, no they're, all awesome. They all are pretty awesome that wasn't true you that week is definitely when I was gon na bring up. You help me film jet week, yeah. That was amazing. What was your favorite plane on jet week? Uh man have a pick, one f, 22 Raptor yeah. That was that might be. I don't man there. There was just so much cool. You know we had the onboard. We had the big boomerang, which was the white one that had the American flag on it. That was the boomerang XL when I had the armboard got to tell ya stand in there with those jets going by was the noise and experience yeah. The noise of the malone is like it blows you away missiles going by. We did HD overkill and the remember the ford that was the beast. With the brown floors right, I was seeing three million. That was a great day. We almost died to film it for you guys. We totally do exceptionally slippery on the hills they were on yeah, but we had that. That was last April. Faktisk, at the time of this, Åh, my goodness, that's coming up a year already almost Yunnan flies three million views.
A lot of people enjoyed that one, so that was cool you've helped me on quite a bit man, so I put in put it that now you're going to be in some more probably good, that's the way we'll see what happens so ever like it good ice. Video turns out know the routine you like it subscribe. Hopefully there's going to be 600 Mere, you never know 600. Oh man that's crazy number. I just want to say yes and your love gems, like I said earlier on, or you mentioned it she's up watching my son right now making sure we could even do this for you guys how many shows get to 600 uh huh, not many men, not actual Episodes you guys have been there for all of them.