Tamiya Konge Blackfoot 1/10 RC Monster Truck Kit 58192
What i’ve done to it, and basically some information about the kit and a little bit of you, know technical data about it as well, Men, som du kan se, it’s my first monster truck on the channel. So let me know what you think down below. Also don’t be afraid to hit the like and subscribe button. Your support is very much appreciated on the channel and make sure you smash that notification bell for when you see a new video coming up, you’ll obviously be notified to go and watch it. So i’ve been talking to gavin from rc kicks watching some of his videos. Lately he started to get a few of these monster trucks. Obviously he’s got some of the juggernauts and a lot bigger um trucks than this. I saw this one. The king blackfoot uh pop up onto a local traders, page um here in australia, and i saw someone posted up at 150 australian. I figured oh that’s, not a bad price, considering a lot of the sort of monster trucks like new inbox about that four. 400. 500. If not more price tag, i kind of had a look at it. I am denied looked into some parts and figured you know, parts wise. These um are quite difficult to find parts for and considering even the to even get a new body. Shell you’re. Looking probably five hundred dollars um, there was one on ebay recently sold by the time. I could get it to australia or it was about five hundred dollars.
So i saw this one pop up on a local traders, page um. I thought i would take the gamble with it and um yeah watched it and eventually, actually it didn’t sell, which i was surprised and the seller dropped it to a hundred australian dollars. So i contacted him, he actually lived about 10 minutes drive from my house, so i jumped in the car. I went over there and purchased the car now, som du kan se, i’ve cleaned it up a fair bit here. It does look in quite good condition. It’S had a few rolls and whatnot missing a few of the the lights and whatnot on the car um. Desværre, the uh the light here on the left hand, side is um, cracked off, but all in all it’s. Faktisk, you know from a distance to have, as a you know, a showpiece or as a runner it’s in very, very good condition. So i’ll show you more of the car very soon and what was in it and what i did to it. But before we do that, just wanted to run through some of the um, i guess some of the specs for the king blackfoot, because to me i obviously made i think, an extreme blackfoot, the king blackfoot, and they made the original like a normal blackfoot as well. So they’re all differ in size and obviously specifications. So the king blackfoot itself, Um, is a one tenth scale monster truck.
It weighs about two and a half kilos um according to the tamiya data. So i don’t know whether that’s with a battery and and full speed control, setup um. It came out on kit 58192 released in july 1997 and it ran through to 2003.. So when it was released, it had a release price of 14 800 yen, which is around about into today’s money, 180 australian dollars. Nwo, Det er 24 år siden, Selvom, so you know it’s hard to sort of work out. The direct inflation but you’re, probably looking around that three to four hundred plus in today’s money um, which sort of adds up with some of the other trucks that tamiya have recently bought out um in the past. So the kit itself has a abs plastic body. This body, som jeg sagde, det er, actually not bad condition. Someone’S, put some reinforcement and glue to glue the bumper bars on, but nothing actually looks cracked in behind to sort of justify why they did it other than them, maybe just to reinforce it. Som jeg sagde, the only damage on it is some light scuffs across the front and the roof line um the body itself. When i got it was actually quite faded and um didn’t really look that very nice. So i got some light car polish out and a polisher and i’ve actually polished it up and it’s got a really really nice black shine to it. Now it hasn’t been painted.
It was just the raw plastic that had gone a little bit. Powdery um decals are actually in very good condition on the car it’s, just a shame that obviously we’ve got a little bit of some marks on it. Um cracked front a light lens and we’re missing, two of the um light bar for the light bar on the top, but other than that it’s, actually in good condition, and you know if i did have it on display or from a little distance. It actually looks very, Meget rar. I did look at buying a body that was on ebay. I could not justify the 500 odd dollars for the body and the decals. I just thought that was absolutely ridiculous. It did sell, but then again a lot of these ebay sales. At the moment i don’t know how genuine they are just because you will find a lot of these things that sell at the very high prices become relisted, probably two or three weeks later. By the same seller, so that kind of clicks to me that they’ve had a little bit of little fake bidding to inflate the market so which i think is what’s happening with all of the tamiya stuff. I øjeblikket, we’ve got this huge inflated market, which just does not add up, because when i’ve sold kits – and i do sell things in the background – and i you know – i do buy things like this – and if it doesn’t fit the collection after a little cleanup.
I will on sell it. I never seem to get stupid ebay prices um, which is a little bit disappointing, because when i do try and buy things off, other people they’re just wanting absolutely stupid prices and they just end up very argumentative and aggressive um kind of you know. I don’t like that side of the hobby, which a lot of you probably out there agree with chuck some comments down below. If you think the prices are out of hand at the moment, but back to the car, we’ve got um front and rear double wishbone suspension. Friction shocks and what else can i tell you just came. Obviously the kit came with a standard 540 motor and this one here i it was. It was quite dusty and dirty the wiring i’m, a big fan of trying to neaten up all my wiring. When i do kits so, what i did was i pulled this whole kit apart. The shocks were all gummed up. Um filthy had some surface rust on the springs, so what i did was um yeah, full strip down cleaned cleaned, all the plastic, nogle af dem. I polished just to give them a nice, a new shine to them the motor um. It was all had a lot of surface rust, so i gave that a little wet and dry sand, and a little bit of polish on there just to bring back some silver to the silver can rebuilt everything and tidied up the wiring and yeah.
This kit was, it had a full ball, bearing set in it. So i don’t know whether they came from the factory with bearings, Jeg er – probably thinking maybe in the gearbox, but not so much in the out drives and whatnot. But if anyone’s got some more information chuck it in the comments um, the other surprising thing was it’s got a full acoms electronic speed, controller and radio gear setup. Didn’T come with a remote, but i’ve got plenty of those anyway, so it’s an acoms, at7, hastighedscontroller. So it looks like a very early model, electronic speed controller again, i don’t know a lot of the specs on that, but i’ve plugged the battery into this, and it absolutely works perfectly no problems at all. Som du kan se der, the chassis itself is in really good condition, and i cannot complain at how nicely the car cleaned up. So for my hundred dollar investment, i have asked some other people out there. Um and i’ve looked online and you know realistically it’s, probably a 250 Til 300 Kit. Now that i’ve spent some time cleaning it and rebuilding it and tidying things up um. But who knows at the moment, i could put it on and get 120 for it or i could get 500 for it, not really something i’m looking to sell at the moment. I do want to go out and get a running video of it um. So when we’re looking at you know buying these older cars and bringing them back to a nice sort of condition like i have with this one, all i do is a quick polish on the bodies and then basically, i strip all the plastics clean everything down, and I spray the any rubber or some of the plastics with a silicon spray just to rejuvenate them.
I do have another new set of tyres that i probably will put on the car, these kind of i’m kind of thinking that these are a little bit dry and basically, if i go using the car that the wheels will probably start to crack, i imagine but Other than that, the actual wheels themselves are in great condition and yeah. I can’t wait to go and give the car a run. So what i’ll do is um i’ll finish off today’s video with some nice close up footage of the car and the body just so. You can see basically condition it’s in but again, if anyone has any of these any tips or tricks for me chuck it in the comments down below also don’t forget to follow me on facebook and instagram. Your support is very much appreciated. I’Ve got heaps of other kits coming up on the channel, so yeah your support is very much appreciated.