HSP KuTiger EP Pro Brushless Motor 1/10th Scale RC Auto Unboxing & Bewertung
Today we are unboxing, this rc car, which i purchased a few days ago, and we will test how fast it can go. Dies ist ein 110 skill electric model racing car by the company, high speed or, in short, hsp hsp, actually produce quite a number of models, so let’s see which model that i’ve gotten here. These are some of the models that hsp produce. Initially, i wanted to get this brontosaurus series, which is a monster truck, but unfortunately it was out of stock, so the seller recommended me another series, which is the cool tiger series. The cool tiger series has two different variants: the blue tiger ep and the cool tiger ep pro. The difference is that cool tiger ep has a brush model, while the cool tiger ep has a brushless moto. As for the pricing, the cool tiger ep with the brush model is around 500 malaysia ringgit, while the cool tiger ep pro with the brushless model, is at 750. Malaysia rigid. The model that i have here is the cool tiger ep pro with the brushless model, because a brushless model requires less maintainers and, in the long run, it’s easier for us to maintain this freezing car kit. Now let’s open up the box and see what’s inside Music. We have the car itself the charger. This is the remote control sticker sheets and the instruction manual here we have taken out the uh, the car itself and the remote control and everything from the box and uh we’re gon na see what’s inside the car.
You can you please put down the remote control on the floor. Please now let’s open the cover. Come here, Musik, you do it Music. This is the cover itself, which is a pretty sturdy. Let’S hope that it can extend some knocks. These are the main components inside the car as i’m fairly new to this hobby, i was told that there are five major electric components inside the electric rc car and first, this is the motor the brushless model. Dies ist die esc, which is the electric speed controller. This it should be yeah. This is the receiver to connect the car to the remote control, the battery, Natürlich, and i think the servo, which controls the left and right movement of the front wheels should be here. I think i’m, not sure so. Let’S take out the battery Music, so we get the battery. Dies ist ein 3500 milliamp hour battery 7.5 volt and i was told it’s a two cell battery a lipo two cell battery. According to the seller, i should be able to have 25 An 30 minutes of run time with this battery. Natürlich, i can purchase a three cell battery which can last longer, but i think, we’re good with a 2 cell battery at the moment before we can do anything. We have to charge the battery and the set comes with the charger as well. This charger is able to support up to a three cell battery. You can see it’s cell one cell two and cell three, so this is a two cell battery and we can use this to charge it.
This is a slow charger and for two cell battery i was told i need around three hours to fully charge the battery. I could purchase a high speed charger, but i think let’s give this a try first. So this is the charger and there are two outputs here and according to the battery, this one should be going to the smaller port, just plug it in Music and let’s turn on the power okay it’s on. So this is cell 1, which is great cell 2, which is red, meaning that it’s still charging cell 3, which is empty here. We don’t have cell 3 here, so it shows green when cell 1 and cell 2 has fully charged. It should be great, so let’s just put this aside and wait for it to be fully charged. Are you excited yes, moments later all right, we’re back, so it seems like cell 1 and cell 2. The light has changed from red to yellow or green, depending on how you see it. So it means that the battery is fully charged now, since the um sky is getting dark outside we’re gon na give it a try tomorrow, let us install the battery to see if the car is working fine. Ersten, we remove the four clips so that we can remove the cover. Then these two clips here to remove the battery holder and just put in the battery Music. I have to put the holder back to keep the battery in place Music.
This is a bit tricky. It’S a bit difficult to put the pins back let’s, give it a try now, Musik, Alles klar, one done another one, all right done when it’s done. This is the cable from the battery it’s different from the charging cable. The short one is for charging, and this is for supplying the power to the car. The rc car connect it to the car Music. All right now, let’s see if it works. The switch is the on off switch is over here. So push the switch all right. You can hear a big sound and the light is flashing. This is the light that’s flashing, this from the receiver. Okay, now we have the remote i’ve already put in batteries for the remote. It uses four double a batteries. Okay – and this is the on off switch. Now let’s turn it on to see if it pass all right press this, the steering to go left and right now, let’s test. If the front wheels would turn let’s put the car on top of this box. This has a holder now let’s spin, it okay, the wheels the front wheels are turning. The movement is very subtle now to test that, if the wheels would rotate Music. If we press on this one you’ll go forward, and if we push the lever to the front it’s a reverse Music. Okay seems like everything is working the next day. Let’S turn it on. Now all right see there’s a switch here at the bottom.
Alles klar, look press. You have to push the switch push it forward. All right now, turn on okay, our first crash don’t turn whoa that’s cool trick. Beeindruckend. You know how to control it already. Tun Sie es noch einmal, oh, das ist, all for our video.