Today i just want to talk about my hoodie ultimate engine toolkit bearing puller and presser. I just want to show you guys uh how it works uh my thoughts on it, and is it worth it or not all right so let’s get into it here: Εντάξει, Uh! So first thing is: Πρώτη, it comes in this nice little box. Here um box feels uh, Ξέρεις, it’s a nice box, i’m gon na lie, uh feels professional, and if you look at it here, it has a little flap that’s magnetic it’s kind of cool there all right. So let me open it up here uh. So it comes with two tools: Uh, it comes with this tool and this tool here put this box on the side here uh. So the first tool here is uh a rear bearing puller and that’s. His only sole job is to pull out the rear, bearing uh, that’s it and uh looks nice and has the huddy logo back there. Εντάξει, Uh. The second tool is a a front bearing puller and also it presses uh the bearings into the engine too. So you could press both of them at the same time or you could just press one at a time if you know i don’t know why, but you could press it one time if you want okay, έτσι εεε, so the engine we’re gon na work on today Is my old os max 20x z, uh it’s, just an old engine that i had laying around and i’m just using it for today’s purposes, so let’s go ahead and get started here so i’m gon na take this uh t handle off uh.
It comes with a cup inside and it has a collar, but this this time we’re taking the bearing off. So we need to call it in there. Uh we’ll slide it through the back of the engine. Put this uh cup right here facing downwards and you put this t, handle on top and you’ll just spin it until it gets uh tight and then you want to. Εσύ, εσύ, Γνωρίζουν: grip the engine and the bar here and – and i use the gripper like this. But you can grip it. Ωστόσο, you want, and from there you just start twisting. Εντάξει, well, uh you’ll feel uh uh the tool working. So this is going in and it’s pushing the bearing out and you can feel this pressure, but as soon as the bearing pops out you’ll you’ll hear a little pop and also uh you’ll feel the tension just loosen up like like it was nothing okay. So let me go ahead and keep twisting it boom. Yeah that’s. It see so now it’s loose uh. Let me go ahead and take this out here. I set this aside. Take this cup out, όπως μπορείτε να δείτε, uh the bearing is out um. You know i was pretty easy, easy peasy right there. Εντάξει, i take this tool out there uh. So now the front bearings out uh. Now we want to take the rear bearing out okay. So we get this tool here. Uh first thing is: Πρώτη, is uh.
You know you want to make sure this is loose so that way, uh it goes into the bearing uh, go ahead and take this back a little bit: Εντάξει, Uh! So what you do, is you uh? Stick it into. I don’t know if you guys can see it here but i’m just going to stick it in uh you’re, probably not here so i’m gon na go ahead and set it down. What i do is i just press down on it hold the t handle, and this and there’s an arrow on top of here. So you just turn it with the arrow and you keep turning until you feel like it’s, tight and you’ll feel it tighten up, and i just give it a nice little tug to make sure it’s super tight uh and then, after that, i’ll uh, you’ll just spin. This down until it hits the motor bam there you go uh. Usually i use these two fingers or these fingers here to hold these uh this this little collar right here and and start spinning, so i’m gon na show you guys here. I don’t know if you guys can see it here, it’s kind of dark but let’s go ahead and do it. So here we go all right, let’s see the bear is coming out. There bam bears out all right. I don’t know you guys see it. There i’m gon na set this aside, so i can see here uh the bearing it out and uh to take the bearing off the there tool you just loosen it up there.
So there you go so you loosen it up there so boom, bearing is out uh. So what the uh, so what what this knob does is that it pulls down onto this little tab right here and as it pulls down. It opens up these hooks and these hooks grip on to the to the bearing and that’s how that that hooks onto the bearing and then you pull it out uh through the engine. Εντάξει, all right uh, έτσι εεε, Ξέρεις, as you can see it took me like like two minutes all right, so let’s go ahead and put the bearings back in uh. So first things first, is you want to grab this tool here uh earlier? I was talking about the collet. Now you don’t need it because uh and you need that space here so i’m gon na take that collet out uh start with the rear, bearing you want to make sure that the ball bearings are facing outwards of the engine. So you, so you want to make sure that it’s facing outwards from the engine uh let’s, so you put that in there first stick this into this back of the engine all right, uh this bearing here is a double seal, so i don’t know what’s front back. So to me i i just put it in who cares uh, but if you have the uh, but there are some bears, there are just one sealed in one side and the other side is open.
You want to make sure that open side goes inside and you want the seal to be on the outside to seal from dirt and grime and stuff. Like that all right, and then with the cup, you want to put it upside down uh. So that way, it presses onto the bearing all right, and then you get this t handle you just spin it on tight and then once you feel the tight you want to grip. It grip both both handles and just keep turning boom. As you can see here, the front bearing is starting to uh get pressed in and you i can feel the back getting pressed in. Ταυτόχρονα, η ίδια στιγμή, Εντάξει, you just keep twisting it until uh until you feel it tight, give it one tug boom and then that’s it that is it all right about there two out there boom front bearings in rear, bearing is in and uh that’s it That’S, it took me about five minutes to take the bearings out put new bearings in. If it were new, bearings and that’s it, no more uh, you know uh doing it the hard way. Um i used to go to the go to the garage. Get my heat gun, keep this up real hard, nice and hot and and then uh i’ll have a two by four i’ll. Have some minutes. Φυσικά, you can’t hold the engine while burning hot, but i would have mins on i would hold on to the engine.
I would just bang it bing bing bing and then the bearing will just fall out uh with the front i’ll. Just take a big screwdriver. Stick it in there, bang and bang it out and it’ll pop out. There uh same way putting it back in. I would heat it up real hot and then uh. You know i was just trying to press that front bearing in and then the rear, bearing. If you heated it hot enough, the the block will expand enough where you could just drop it in and it’ll kind of you know you can kind of use a screwdriver trying to push it back in and and that’s it but um. Ξέρεις, but with this tool i wouldn’t have to do that anymore, Um, supposedly now uh. As far as the the tool goes, it works great works, great i’m, not gon na lie, it’s it. You know it. It works great i’m, not gon na lie, but um being that, i do have multiple engines that i work on. I was working on uh. You know this dynamite big red and come to find out that the big red engine and some of my hpi engines uses a 13 millimeter bearing, and this two right here uh this tool, this rear bearing puller and this tool is a 14 Χιλιοστό. So it won’t even fit into a block it wouldn’t even fit inside the block, and this wouldn’t fit inside the bearing to pull it out.
So i went to a main i ordered uh with amy, and i ordered this here. So this is a a 13 millimeter collet for .21 rb and sh engine bearings and this this tool right here. This piece right here uh replaces this 14 millimeter uh, with a 13 millimeter so now i’m able to go into uh to the to the dynamite or whatever sh engines or hpi engines that i have and i can go in and pull out the rear bearing and Keep in mind this is 25, a piece right here, A 25 piece to addition to a hundred dollar piece that i just spent to to buy that so now, Εγώ είμαι., 120, 25 dollars in uh, but that’s not where it stops. Um i went. I went to a man to see they had uh, something that will work uh for a 13 Χιλιοστό, because this is a 14, so it wouldn’t even go inside the block. So i also purchased this, which is uh a bearing presser adapter for a 0.12 Μηχανή. Uh. Now that i have it in my hands um looking at it, it looks too small. It looks too small compared to the 14 millimeter and also i believe this is 11 and a half millimeters, so it’s just way too small, so i’m gon na have to contact a main and tell them that um it’s not gon na work for me and i’m Gon na need my uh. You know i wan na.
You know send this back stuff like that, so this was another 25. So, even if this was a 13 Χιλιοστό, so so, with these three things: Εγώ είμαι. 150 In 150, just to pull out the front bearing and the rear bearing – and you know for somebody that has one or two engines uh to spend 150 dollars um, i wouldn’t recommend It you know it wouldn’t make it doesn’t, make no sense now uh. Για μενα, you know i have multiple engines and stuff like that, and you know it it it’s worth it, but at the same time you know um, you know for a hundred dollars. It should have came with a 13 millimeter and it should came with a 13 millimeter thing, so it should be an all in one for 100 tool, αλλά είμαι 150 in and i don’t know i’m kind of tossed up about that. You know i don’t know how i feel about that. Ξέρεις 150 to pull out the front bearing the rear, bearing you know, Um, you know if it did everything i needed to do. You know you know i wouldn’t like it but i’m, Ακόμα, okay with it, but being that you know it. Didn’T it’s, Ξέρεις, even with me, buying the adapters uh it’s still not working for me. You know you know i’m it’s not liking that um. Ξέρεις, but if you have engines that are just strictly 14 millimeter now you’re golden this, this you know it’s a perfect tool and it’s a must have for me.
You know the to me uh. If you have more than you know three or four engines. Δεν είναι αυτό που νομίζω.. Definitely a must, have you know, uh if you know to change your barrier, because you know what you know if you’re gon na do it? Do it right? Ξέρεις, you know don’t don’t play with the game. You know we. You know we see these videos where people are hacking and trying to do things and stuff like that, but if you know if they got the tools to do it right, why not you know i mean uh? Why not uh? Επίσης, i just want to put this in the i just want to throw this in there here also uh. I know i noticed that um that uh some of the uh nova based engine like this ninja right here this little ninja here. This is a nova based engine um. I want to use this uh tool to take the rear bearing out and come to find out. This rear, bearing i don’t, know how how many uh uh nova engines are are like this, but this rear, bearing is 14 and a half millimeter inside diameter. So this is a 14 Χιλιοστό, so uh me tighten it up all the way it just couldn’t it just didn’t work. It just didn’t work, so you know uh, so that’s another disappointment to be uh, Αυτό είναι. Another disappointment here in this tool here uh. You know i know reds make the same, but they they don’t have the that it looks like they have the same options as the hoodie um.
They don’t really have a selection like that um on these uh on these engine pullers here uh bearing pullers and um yeah. I don’t know you know um. You know the tool works great if you, if all you have, Είναι 14 Χιλιοστό. But if you have uh, you know some odd engines like the dynamites or the sh or um some. You know some novas that take 14 and a half or whatever engines that take. You know some different sizes uh. You know you may want to think twice before buying this tool. Um, Ξέρεις. As far as i know i i like it. I do. I just wish that they had the options uh the options for my my engines, Uh, that i have uh. Ξέρεις 400, Ξέρεις 450 Δολάρια, Ξέρεις, for you know it should have been enough. You know i don’t, i don’t understand. I understand 150 dollars for energy, puller and uh still can’t uh. Do what i want. So i don’t know you know for you guys.