You will have to have the key cut. The one in the new remote is blank and not removable, took a locksmith two minutes or less some stores. Might can do it too? You use the electronics from your old remote, so there is nothing to program works. Fine buttons seem a little light duty. Time will tell how it lasts. This is an easy repair. You can do yourself other than getting the key cut. I like that all i had to do was get the key cut after i assembled everything with the new battery worked great. I took the electronic components out of my old key cases and installed it in the new ones. The local locksmith cut the keys for one dollar, oh each, what a savings over purchasing new keys from the dealer. I ordered this and didn’t look at the picture. The buttons are not the same as my fob on a 2007 dodge ram. 1. 500.. I cannot rate lower because of my own ignorance. The electronics will not line up with the buttons nor the battery the electronics do fit inside. The fob, Αν, and the key was the correct key for a dodge. Had it cut for two dollars 62 and sat the electronics from the old fob inside. So i don’t have a key fob that works remotely, but i do have a key that works for the doors and with the electronics inside it still works for the ignition. All i would have had to do was look at the picture to know my buttons would not line up.
If your fob looks just like this one in the picture, then i am fairly certain. The electronics and battery would fit well and it would be a working remote fob if you have the guts to your key fob, but the case has busted like mine did. This is perfect. The key can be removed from the case and copied by your local key cutter has saved me hundreds versus having a new key fob.