
What scanner is better to program this Amazon Key Fob Remote?!
So let me go ahead and open it for you guys. This is brand new I’m. Not setting this up same thing as last time. They send you a car that where they tell you that you need somebody to program this, when you look at the description, I don’t think they tell you that and they also send you this customer support card here’s the company that makes it it’s called keyless option. Εντάξει, so the remote does come with the battery, which is a good thing. So let’s get this out of here and let’s get programming, Μουσική, Μουσική, all right, what’s, going on guys so check it out. Last video, I showed you guys how to program this remote using a snap on varus, and I told you guys that I would show you to program it with the automatic says so: I’m right here, hooked up to the scanner and we’re gon na see if the Scanner has the option to program this chemistry mode. I haven’t open it. I just got it from Amazon, so we’re gon na see if the scanners are able to do it. If not, then there’s no problems, because I got my snap on various and high end ready to program it so usually where this is. That is this it’s under hot function and you’re, just gon na have to program into the body control module just like with it. In the last video so let’s see here, let’s see what’s under engine controls and control module or life reset.
We don’t need to do that. So what do we go? Back? Let’S, go back, come on diagnostics, all right, so let’s go back engine electrical, maybe control module or life reset there’s, nothing! There, ABS, I wouldn’t be there instrument panel, the so all we have here is life reset theft deterrent. Maybe nothing lose control just for the of it. Nothing HVAC nothing. I don’t know what’s going on here with this hot function. Usually you go under hot function and you’re able to program a remote programming, BCM program, a tire pressure monitoring system, but we’re not able to do it here. So let me go ahead and hit diagnostic and do a complete scan of this and I’m gon na see. If it scans the body control module, maybe I can communicate with it and go through there and because I know there’s things I could do with this scanner that I can’t do with the Feres, and I know there’s things that I can do with the Bears that I can’t do with the auto so it’s good to have both, but I know what everybody doesn’t have the money for this, but we’re gon na see, if it’s possible, Hey, I scanned the whole all the modules that are in this car. This car has a total of shitload of models. It has 23 that I counted. Some of them do have faults in them, but I don’t see one for the body control module, so I don’t know where I’m gon na have to go so I can program this.
So I think, if I go to the body, control module or one then controls it. I might have a special function for programming this remote, so let’s see. If I can special functions engine nothing there. What would it be? What would be what’s si R and a lock body rear end? I don’t know if it’ll be under ABS. A lot of times are linked together, they’re connected together, nothing there. This is the same thing as engine okay, so I’m, basically trying to connect to the body control module, like I did with the snap on scanner so that I can program it for you guys and show you guys how easy it is. Maybe instrument panel call the same. I don’t think this scanner is able to do it special functions, body control, module all right, so it’s under tab deterrant. You can bpp it’s brake pedal position, sensor, Εγκατάστασης, SDM part, ID number and ECM program, key fobs, which is what I’m gon na do all right. It says every time a fob is program, it’s necessary to put them all of them, so the one that I programmed last time with my snap on scanner, which is this one right here, I have to program it again all right and then I got to program The other one, which is a new one, that I got so if we’re able to do it, it just took us a little bit of time to find where we’re supposed to go but it’s doable.
So here we go, it says simultaneously press and hold the lock and unlock buttons on the key fob now, which is holding together, heard a beep. Now I go to the one over here. Can I hold those two together that beep is done now we go and wait. Okay and that’s it see if this new key fob works, locks unlocks trunk same thing as last time to see if the trunk works and it does there, you have it guys. Another key fob: another key fob programmed using the auto maxes a cheaper option than the snap on various, but they can both get the job done so, whatever scanner you have available to you, if you’re ordering these key fob from Amazon just know that you’re gon na Have to have them programmed using a scanner you don’t have to little dealership.
[compare_prices_deals]
Πηγή
Do you need internet for this decide?
I have a question so which one helps to connect the MX080 or the MX808TS for the MPN. I’m on the website jbtools.com and the price for autel isn’t bad. MX808= $384.99 MX808TS= $576.77 which one do you recommend I ordered my keys from amazon.
It’s under services that’s why he can’t find it
I programmed two "fob" remotes I purchased from ebay a couple of days ago. The new fob remotes did not have the button to pop the hatch glass (on a 2007 Jeep Grand Cherokee) the "old" remotes do have a button to pop the hatch glass, but I went ahead and programmed them using the old remotes. The programming seemed to go ok. The new remotes start the car and lock/unlock the doors, and I thought great! I saved a bunch of money by not going to a locksmith. BUT the car died on me today, and it will not start. I suspect the programming was not 100% successful. The car turns over and starts for a second then dies. Do you think the new fob remotes did not program 100% successfully? Would appreciate your thoughts, let me know if you need more info. Επίσης, one of the old remotes was totally dead – I broke a the clip that holds the battery. The second "old" remote was bad and would lock/unlock the doors sporadically; that's the reason why I bought two new fob remotes; and that is also the reason I think maybe the new fob remotes did not program correctly, but what do I know? On the other hand, it may be coincidental that maybe there are other mechanical problems. Hope to hear your thoughts. Thanks in advance.
haha you dont need a computer to program the fob its in your settings for chevys
What model# is that scanner?
Just seen couple prices for the verus dam 2,500 to 4,500 that's insane lol😵
Can it program new keys?
Which 1 is better for bmw,infinit,Lexus, key programming
Can this program Mercedes remote key fob?
What ones better? It makes sense that it would be under theft deterrent. Which one can program a key better?
Autel is too advanced for you
Body Control > Remote Control Door Lock Receiver
i have a zurich zr 13 …can i program my remote with this
i have a zurich zr 13 …can i program my remote with this
"This car has a total of a shit load of modules" LMAO! Funny
That's dope yo!!! I be trippen like scotty pippen not to buy me a Autel. Peace out Homie Hektor.
Thanks homie you helped me out with this video.
This is funny asf it's a Chevy no scanner required to program remotes. Or programming the key blanks.
I need one for my truck can't figure out why this break light is on
I usually find all programable functions under the programing funtion. I have the 908 though so it maybe a lil different.
Any how great video! Thanx for sharing!
That's good information Hector. I have the Autel Maxidas, not quite the same as yours but I'll play around and see if it has this function.
Good info to know I’ve been thinking of getting an autel
Glad to see a new video from you, Homie!
Those scanners ain't cheap
Keyless option is a great company, and not for a second did I expect Awfultel to make it easy for you to find lol. Nice video as always brother. Keep em coming