Um neat thing: you guys mentioned several of you mentioned anyway – that i should get the fur tech, free tech for tech and uh. The strange thing is, they actually contacted me and sent me two of their escs, so they sent these to me but i’m gon na open these up and see if i can mess around and make these things work it’s a little bit intimidating how small everything is With this um i’ve already got the app downloaded on the phone, so i’ve already got that so i don’t have a brushless motor because it appears that the uh, the uh tegu tegu right there ha actually has an foc on it um. I need you guys to comment down below what i need to get for a motor um. It is a bouncer, so a little wheel. Speed is a good thing, así que estoy. Definitely wanting to do that. I’Ve got the overdrive gears for these i’m still waiting on the widener thing. I’Ve got some cheap knockoff wheels and tires for with the chrome wheels, because i like chrome, pero um, but regardless of all that this is about the esc’s so i’m going to show those to you and try to get those in here and i may end up Changing the radio completely because it appears i can do that with these ess, so guys let’s get started. So these are what they’ve sent me right here. This is the lizard and it does have the little bluetooth thingy on it, and this right here is the tegu tigu, and it also has the bluetooth thing so, como mencioné, i’ve already got the app um pretty much.
These are just esc’s, you know um. I started looking into them i’m like okay. Qué es esto? Is this like a receiver, Esc, No, es, just the esc, so yeah i’ve got some figuring to do here. So what i’m going to try to do is actually give it a controlled drive right here and see if there’s a difference between the two and i do have to. As i understand it in the instructions convert it over to brushed since i don’t have brushless. Bien. First let’s rev it up Music. This is box stock. Now i just don’t have the room for you notice that the brushless system with a little revolver up there, No, have the room for that. So what i’m going to try to do is see if there’s a difference in the throttle control right here, Música, Muy bien, it went on up a little bit Music. Bien, so i guess i’ll go with that. I’Ll plug in the lizard i’ll change the settings over to brushed and we’ll see where we are Music. Bien, so everything is plugged up. We got power to it. Obviamente, there’s no motor connected push this little button right here and we have power. I don’t see the lights on it. Got receiver steering looks about right, so let’s go ahead and try that app and see what we got here. You got to catch that little red car up top and once you tap that set that password get that done.
Something simple, so you can remember it and then once that’s done you’re in here we’re looking at updating the firmware so get that going there you go done here. We are going to change the motor from brushless to brushed and now we’re going to look at some of the telemetry. Now this right here, you can see actively what’s going on that’s. Some of your uh throttle curves here’s, some your motor settings and all that voltage cut off. You get to change that. Of course you want that so yeah just different things that you can go through and set up, uh max, Marcha atrás. You know about 71 and then we’re just going to adjust things around and try to get this thing going, and here we can see the throttle curve see a little bit of that now here’s some of your throttle settings now. These are important settings for fine tuning. This thing and over time i’ll get a lot better at them, so we’ve got it in and working now i am using the stock radio, so i don’t have any. I see channel 1 steering trim and dual rate, but nothing really for the throttle. So apparently i do have to go through the calibration process. As far as the calibration goes, you get back into this screen right here. You look up right there at the top. You see the little calib thing. Bien, Es decir. What you want to press then you’ll get into the calibration and it’s actually pretty simple.
So it walks you right through it, see that nice simple, easy and then pretty much you’re, just about done and ready to go now, we’re looking a little bit deeper into the throttle curves right here. This is the forward curve and, as you pull the trigger you can see, it actually move all the way through it. Why it’s, not linear from the factory, i honestly don’t know, but this is the reverse curve right here. You can see it’s not exactly linear, no curve that you’d be used to now. This is kind of like a live tracking of exactly what the esc is doing. The outputs and all that stuff like that. This is this is really neat to see. Realmente, you know live streaming like this. None of my others have it well. Bien, Veamos. If this thing can drive here. Bien, i don’t have the startup control. I mean it feels feels okay, Creo que sí, but i don’t have the startup control that i had with the stock esc. I don’t have any less than that. Muy bien, let’s see if there’s a setting. I can do to get that taken care of this area right here. This is what i found i needed to adjust to get the low speed control so the neutral forward, and just all of that turn it down, and it works out really good check this out. Yep it’s all in the settings so now i’ve got the control i needed.
I actually almost popped a wheelie on that. Did you guys see that and now i’m stuck while i’m recording this amazon just delivers some new receivers so we’re also going to change the radio, because i mean really, i can’t leave it hanging out like that, so i’ve got to get it all tucked down in There so let’s get this radio changed out. Bien, so i’ve got it set in got everything calibrated. Let me show you guys: gt3c uh, three channel receiver got that in there a little bit, the bluetooth is still hanging out wild and free um. Aquí vamos, i got it on mic for micro. Now this one, i have uh all kinds of features: it’s got uh, throttle uh expo all kinds of stuff right here on the radio, so i also believe it’s a little bit more of an accurate radio. As far as the throttle steps go um, it does feel a little bit smoother, giving it more throttle. Así que en definitiva,, Creo, it’s very controllable, Music there’s, no motor home huh that’s interesting the uh stock. Sí, he’s got hum on it, that’s how you break stuff, um. Bien, let me go ahead and uh get all this tightened up now. Bien, guys i got ta tell you there’s a lot more tunability. With this i mean the stock esc, pretty much, no tunability that i know of, but i never really dug into it, but i kind of have my doubt.
So it was a pretty basic system. Uh the lizard seems to be the most practical for a tight situation. Así, Como, He dicho, i don’t really like my wires and plug sticking up. I think i’m gon na smack those may end up having an issue but i’m going to try to get that turned around and hopefully i’ve got enough wires. These wires are really short on these servos and all that, but i get to get the antenna wire patched up somewhere or at least tucked in somewhere. You know you don’t really get a lot of distance from these, so i mean, if you’re getting more than 10 feet away from these you’re really away from this thing. Así que ahora, as far as the tegu esc right here goes, i there’s no way for me to fit this in here. So for me to make this work like i said, i need to get with uh two fmrc figure out watch some of his videos and figure out what he’s, using for a motor mount and i’ll i’ll need a whole nother vehicle to run this uh. This right here has got that foc on it, so i’m really looking forward to it actually, but which vehicle um i’m thinking the uh classic chevy um, the local guys they seem to like those a lot better. They seem to perform better right out of the box. I guess the center of gravity is down and they’re just built good, so um that might be what i’m looking at i’m, certainly not getting another deadbolt because that’s what this thing was made out of – and i did not like that.
Pero de todos modos, uh comment down below which one you think this right here would go into and work very well um, but more than likely we’ll get our that little revolver style motor and that mount that i saw on his channel. So i just need to send him a message: donna but guys uh. Oh hopefully, like the video check that description, i will put links to all this stuff down in there uh the mofo rc stuff, the sex 24s – that i can find and all that so they are affiliate links um. I don’t have an affiliate link for fur tech, but fur tech. I hope i’m saying that right um, but i will put links down there for them as well, so make sure you check that out so guys check that description, use those links make sure you’re subscribed and thank you all for watching guys. Si te gusta, what you see hit that like button hit, that subscribe button and ring that bell so in the description, there’s a link to become a channel, remember if you want to become a channel member it’s, a very simple two dollars: five dollars, ten dollars or If you really got some money 25 a month it’s a simple way to support the channel so get that and i am doing monthly giveaways for members only so you might want to consider it so guys here’s, those links make sure you’re subscribed.