I wanted to do an update with the mods that i have for racing. The traxxas slash ultimate. así que, as you guys know, this is the ultimate model. I bought the fox racing edition body because i, like a lot better. The ultimate body is up there. I like the fox racing body, so you know i got it stickered up a little bit, that’s pretty much it. This is going to be the race body and i’m, probably not going to use it until i can keep this thing. Rubber side down so we’ll take the body off. Take a look at what we got that’s, where i stick my bodies, so underneath the hood here. All this is stuck 100 stock it’s waterproof it’s fast. Yo, like it i’m, just doing this for fun. So i put a chassis brace in. I got off a guy on ebay that’s to keep the chassis from breaking and comes with all the hardware and everything i got. The proline calibers on nice tires they’re going to work very well. I had them on my last slash, so they came pre glued and everything on wheels. Rpm, skid guards a lot stronger than the ones on this that come stock on it. These ones are less liable to break so the vg racing tuned springs. I did not put different shock oil in it: that’s stock shock oil just put the springs on, they haven’t been adjusted yet so don’t pay attention to the adjusters rpm green, a arms which look pretty cool.
I think and techno front and rear drive shafts, so i’ll spin this thing around to the rear and you can see these are a lot stronger, a lot more durable. I did have to give up the aluminum hubs in the rear and the aluminum turnbuckles in the front that that one piece of aluminum is still there, but the other one’s. Not so i had to give that up, but i think for this setup it’ll be worth it. I am disappointed in techno that i can’t run the stock aluminum hub, so i’m gon na see what i can do about that, because i have all these great aluminum pieces in the drawer here: can’t even use them so that kind of sucks, but that is the Race setup for this car it’s not finished when i break stuff i’ll replace it. I know the bell crank is going to break eventually i wanted to get these in aluminum or carbon fiber. This is just the modifications i bought when i bought the car to be able to go out and enjoy a little bit of recreational racing with this thing, so it’s nothing, fancy it’s, just some of my tasteful stuff that i wanted to do to the car to Make it perform a little bit better? I can tell you right now: i expect these bumpers to break eventually so we’ll be seeing what we can do with those, but this is the race setup. This is how we’re gon na roll to the track and i’m pretty psyched about it.
The car looks good. It doesn’t look like an ultimate from the outside, obviously because it’s got the fox racing body on it, but if someone’s looking they’ll see, it’s lcg and it’s got gtr shocks and all that. So this is the setup we’re gon na get her to the track and see if we can go, do some racing with it. But please comment like subscribe. Let me know what else you guys think i should be putting on this thing, porque es, basically just a uh, a sleeper right now with everything underneath it looks like just like a regular vxl slash with this body on it.