I call it the truck, ladies, because i put a gladiator body on a trail. Runner show you guys the servo take it outside. Regardez, and here we go right here now. This has the hard plastic plate. I use one of those as a line guide to keep it right up here into the spool or the drum it just simply melts down using some two millimeter bolts, nice and simple. This is plug and play so it runs off the bec of your esc so make sure you’re good to go i’m just simply running a regular 1080 on this and it’s found a 422 hd v2 servo, and this so let’s get this thing outside and see what It’S got okay, so we’re going to get this thing into a winch situation soon, let’s just see where we end up. Bien, hey Hey Hey: hey Hey Hey, hey Hey Hey! Look at there. I think we’re all set now i’ve got to get this thing out and all that i’m using the gt5. So i’ve got to kind of get this a little quick here get that loose. I want to flip this because working one hand is going to be kind of interesting i’m going to go all the way out to about right there. d'accord, Et voilà. This is quite the challenge now i got to grab my land anchor and get that thing set up. d'accord, so here we are get it all set up, see that arm it’s uh, not so happy wow that picked up the back end of this thing.
Bien, nice job: oh nice, save okay, nous allons, get up something pretty gnarly here. How about we to cross over the twin ridges we’re, just simply going to ease up on it and then i’m going to set the winch up. It is hooked up and ready to go going to winch in and drive wow let’s give this thing a serious test here. This should pull the front real hard up against it and hopefully get me across it Music. C'était génial. Now we went something just a little crazy. I don’t know if that little glued down rock is gon na hold, but let’s see what happens. Music gon na burn it up. That little switch is hard to get wow. That was awesome and we keep on winching Music. Nice we got hook it Music, beautiful another climb. Musique. Cette chose est génial: d'accord, we’re back to this uh, this time, i’m gon na i got a different hook spot, and hopefully we can actually get this. Oh, Oh, i broke it wow wow. C’est génial. Guess i get to work on it Music, Tu sais. Sometimes i go in to test out certain things and i have a preconceived idea of what it’s going to do, how it’s going to do it and whether it’s going to survive. You know certain tests this right here went above and beyond my expectations, it’s such a small little servo with massive power um. I can tell you guys right now, when i build a vehicle for a servo, winch i’ll never build for a large one again.
This right here i kid you not you guys saw it. You guys saw what it did with this truck right here. Euh, hey that darn thing done great right off of the receiver, so now it’s good for 8.4 volts and i believe that bec was actually is actually set, Lla 7.4 ou quelque chose comme ça, so it is turned up on the 1080. Alors oui. I got to admit that little dude is awesome. I expected maybe okay, so small, the tiny little bearings if i really stall it out. They’Ll just shatter you know, which, on that radio trying to do it with that little uh swing switch deal underneath there uh, not the best of controls. Pour cela,, i prefer the gt3c with the momentary that’s that’s that that’s the best way for me to actually control the winch, so this will probably get the gt3c in it to replace it. Now that it’s got the winch, but it had the gt5 okay, let it run but guys uh, hey it and my whole point of that. What i’m trying to get at here is uh. There was one point in the video where i actually couldn’t get to the switch in time and it actually stayed stalled for four or five seconds now. If you stall a motor like that under full load, which it absolutely was, you can absolutely burn things up. So i’ve got to assume in that board is a current limiter, so that probably saved that servo for that particular uh uh mess up by me by me.
So anyway guys uh. This thing it did good i’m, really happy with it, so check that description for links for this guy right here make sure you check that out, because this little dude yeah when i like, i just said, i know – i’m a little i’m a little bit excited here, But just like, J'ai dit, i’ll build for this over a large servo winch any day, guys check that description, make sure you’re subscribed and thank you all for watching. If you guys like what you see make sure you’re subscribed hit that subscribe button and ring the bell. Si vous aimez vraiment ce que vous voyez, envisager de cliquer sur ce bouton joindre ci-dessous avec ce, vous pouvez effectivement devenir un membre du canal membres obtenir une visualisation précoce de la plupart des vidé os, et vous savez un peu plus personnalisé gars.