Today, i’ve got another product from gt power um about three weeks to a month ago, i reviewed one of their sound systems for your rc cars and uh. This one is a little bit similar, but different, being the fact that this one runs off bluetooth via an app for the different uh sound modes and also the different light modes as well. And this one has a full lighting system, which the other one was only a speaker like this. Now the speaker of this one still has 58 different kinds of um. You know sound effects from different cars and trucks, but this time we’ve got as you can see here, a bluetooth, smart bluetooth, operated, uh, actual lighting system board as well. Okay guys! So, as you can see here, you can download it on the app store and google play, so it is compatible with ios and android phones or tablets, uh ipads, whatever device you like to use and um yeah. It comes in a small box here, there’s some of the specs that we get guys so they’re all the products in the actual box itself. Okay, now i’ve got everything out ready to go so i’ll show you exactly how it works guys. It does run on the same specifications as the previous model. Um being that you know, the input voltage is uh. Six volt speaker input voltage. There is up to 26 volt, okay, so a little bit of uh installation warnings there.
Now this does not come with a user manual. Okay, see here’s. Some of the bits and pieces that are left over i’ve actually got the module to my left here, which i’ll show you in a second i’ve, already got it all plugged in, but you get a usb cable as well. In this bag, we’ve got the little light. Cups – okay, obviously i haven’t used them yet i’m. Just going to do a desktop review on this product i’m, not going to i’m going to put in one of my rc vehicles later on, but we’ve got cable ties um to neaten up the wiring once it’s in your rc car or truck and we’ve got some Sticky pads for the to stick down the module or the speaker now, as i just mentioned before, i just got a bit sidetracked. This does not come with the user manual, as you can see, there’s nothing in there. What you have to do for the instructions is download the app okay, guys and you’ll get a couple of pdf files that you go through pretty good diagrams there, and also this qr code leaves you to the link for the actual app as well all right guys. So um i’ll show you the uh actual system here and okay guys well, as i mentioned just then, um i’ve gone ahead and plugged it all together. Okay, just to save time, so here is the speaker guys and it plugs in to this port there.
Okay, we also got our power supply. So just like the other speaker box, you do have to use a 2s lipo or even a 3s, whatever dean’s plug lipos. You have to power this system, okay, so um, as you can see here. On this side, we have the pins for the um esc, wiring for your servo and the esc. So the top one says: directions that’s, where your servo goes channel one accelerator on the second one. You got two different horns: okay, we’ve got our buttons here, enter esc, which is plus and minus there and we’ve got their mode button in the middle. Okay got an led indicator to show you different modes as well, and on this side, this is where you have to plug in the outputs. It actually is marked input on this one for your four channels that go to your own receiver. Now, as you can see here, i’ve just got a little uh mini receiver here from turbo racing. Okay and um, and here is where all your led lights go. So you got six different pairs of lights. Uh two of each so you’ve got two white for your headlights. We have two orange ones here and some red ones as well for taillights, okay, guys so we’ll do i’ll, go ahead and um hook up my esc i’ve got this esc and motor just to demonstrate this uh this system so i’m, going to plug the esc. On the right hand, side here, okay, so we’ll do that now: let’s plug it into the accelerator port.
Okay, it’s just plugged in there second channel i’ve got this mini servo here and i’m going to plug that into the first channel under direction. Okay, so that’s how it should look okay. It is a bit of a white a bit of spaghetti here but uh. Obviously, once you got in your car, you can use those light cups and um cable ties to tidy everything up. Okay, but today i just wanted to show how this actual system works. Okay, guys well, as you can see, i’ve got everything connected together. I’Ve got a lipo to power, the esc here and another 2s lipo plugged into the actual power supply of the lighting system. So, first off we want to turn it on. Okay, as you can see, we’ve got some lights on there. Okay got the transmitter on here the little turbo racing one now, as you can see, when i turn the wheel, we’ve got the indicators or blinkers or flashes. Wherever you are in the world, you have different terminology for it, but uh yeah that works. When you uh turn the different directions of the wheel now, what what i’m going to do now is um actually go into the app so i’m going to start a screen recording here i’m going to this app here is called rc, lns or rc light and sound System: okay, okay, so what we can do we’ve got that we’re in the home section. So far, um i’ll come back to this section, because you’ve got your different models of cars here, as you can see here all right, so we’ll go back to that.
In a moment, i want to go to light and sound now, as you can see it’s in standard mode just here, okay, so what i’m going to do i’m, going to click it to flashing mode? As you can see, they’re all flashing now go down to slow, blinking mode, they’re going to blink slowly and then we’re going to go to keeping on so it’s going to just keep all of the lights on. As you can see here, they’re all on okay and then you can turn them off totally turn them off. Okay, now you’ve got some uh horn selections. Here there is a siren built into this one let’s, try that on channel three here, we’ve got channel three hold it down. You’Ve got a cop siren or emergency vehicle siren, okay, um let’s see if this will change it. No okay, because this particular um transmitter turbo racing uh it’s, not a three stage, switch it’s, just a little um one button here, uh for the third channel, so i can’t switch between the horn and siren modes on this one. Only only mainly due there it’s a four channel transmitter now on the dumbo rc you’ve got those slider switches. You know across the actual handle uh that can alternate between the horn and the um, the actual uh siren, okay, now there’s all different settings here, guys i’ll. Just scroll through them, i’m not going to change them. I don’t see the point i’m going to keep everything in default, but i’m just going to show you them all here.
Okay, so you got different sensitivities, basically steering volume that would be for the the blinkers so um let’s try make that a little bit louder, yeah it’s it’s louder. Now you hear that okay, so take that down a bit um. So you’ve got your siren volume. You know i can make it louder, she’s going to be really loud. Okay, so i’ll turn that one down. So, as you can see there’s a lot of um, you shift gears as well so shift gear positions, shift volume, so that’s pretty cool blow off valve. For the turbo cars, the sound effects for the block valve throttle start sensitivity. So it’s got a heap of options. This uh particular light system guys and sound system um compared to the other one. You can choose the different uh batteries that you might use. You know if you use a nickel metal hydride, for example, on a crawler or some other type of rc vehicle i’m just going to keep it on the lipo. You can choose yourselves as well. Okay on this side, okay, so that’s, pretty cool um, just i’ve got two cell further down turn off sounding output turn off esc output. You can reset everything to the default. A really good um, really good, uh interface on this uh app itself within itself. So uh. This uh demonstrates just what i had it on so we’ve got the throttle, i think, it’s, on the ac cobra. As you see, the motor is turning okay and the steering as well.
You won’t be able to see the steering that much because i don’t have the servo horn on there, but it is turning okay. So this while we’ve got it here, this change to a couple of different uh cars. Here we go select it’s, changing there’s, a bmw, m6; okay, guys yeah. We could go all the way down. As you can see, i’ll go through them, pretty slow. You got a whole heap there, guys subaru let’s hear what the subaru sounds. Like yeah boxer engine of the subaru. There you go. Okay, there is a whole heap, guys seleka gt4s here, camaros a tom supra, chevy nova, all right guys la ferrari. Now all these um sounds are exactly the same sounds that were in the previous uh sound system that i did uh the gt power, one that i did about a month ago, all right guys, except with this one, you can actually see what models they are. Actually that you can actually choose all right guys, which is awesome. Okay, so that’s pretty much it guys. We’Ll just turn this off, so that’s, pretty much it guys, um. Obviously um! You know you, you tidy it all up. You um! You know whether you’re going to put it in rc car truck crawler i’m, actually going to i’ll demonstrate this later on. In one of my crawlers, i think the mn 86 ks from mn model that amg g wagon, which is the same sort of bright yellow as this one.
So i have a matching controller for it: i’m, actually going to put this system in that um, because that has a independent esc and i’ve got a receiver in it already so i’m thinking, i might actually put it in there and i’ll make another video later on. This is just to show you how it all works via the app and and how to pretty much set it up. I went through the menus there on the app it click connect the bluetooth and, as you can see, you’ve got quite a few features there within the app itself. I really do like this system compared to the other one. The other one is pretty good, except you just don’t have the interface or connectivity with bluetooth and that one obviously didn’t come with a light system. So yeah a really nice product, this one from gt power. Is there a model number on this one? I can’t see any model numbers on the box, but i’ll. Definitely it might be just down here on the barcode, but anyway guys i’ll definitely leave a link to this uh. This particular bluetooth version, rc car, sounds light system simulation from gt power. It’Ll be in the description below so feel, free to check it out if you’re interested there is an australian um supplier of these units. So if you live in australia like i do um, i believe the the actual website’s called model engines, australia or something like that.
So i’ll leave a link like i left in the other video guys, um i’ll leave the same links except i’ll, be putting the link to this particular uh system uh at the top of the um, the description there and you can check out all their all their Products guys they got some great products, gt power and uh. This one is no exception. This is really good guys, so uh anyway hope you enjoyed this review and uh of this uh particular system and um i’ll catch you on the next one guys like i said. I will make a follow up video later on down the track when i’ve got some spare time. I’Ll put this whole system in nice and neat in the mn model. The 86 ks g wagon, which is a kit, form crawler a 112 scale. So it should have plenty of room, especially in the back of that g wagon to uh. You know put the speaker and the module there so uh once i get that up and going i’ll definitely make another video with all the lights and uh take for a bit of a trail run with the sound effects. Alright guys so yeah guys give us a good old thumbs up. If you wish to, i sure, do appreciate it. If you’re new to the channel feel free to subscribe, like comment all that good stuff and i’ll catch you on the next video guys, if you want to see the previous one that i reviewed i’ll leave it at the end outro cards here and i might pop It up during this video as well, so you can check that one out as well.
If you just want a speaker system and you don’t want lights, maybe you already got a light kit in your car already and you’re just missing the sound effects.