So i saw tomley rc review about it. So i asked banggood hi ben good. Can i have one of this hi edward? Okay? Let me have a look: would you like a kit or rtr? Well, rtr, of course oh yeah, so it’s here let’s take a look inside. Oh, my god, that’s a pretty nice body, shell it’s, a gt86, looks really good, though let’s see some plastic accessories like the front bumper and body shower pole and the car itself, and i think there is uh esc inside here. Oh well, servo, 9 kg esc. Quite a small size one – this is citrix stock club race by surpass hobby as well, i believe, should be uh according to tomlin’s new supports to sell the motto, while this looks quite cool with banana plug connected. So this rtr version, ideal version comes with high self hit, assemble with uh, esc moto and also the servo so there’s the pinion gear. Where else, if it’s a kit, i believe, is unassembled – and i believe this is a brand of the one released by hobby king. Many many years ago and the reason i caught it is because i see the knuckle, it seems like there’s a potential to make this rear wheel drive version. So this is a currently a full drive version, i’ll just try with four drivers and then i’ll well snatch. The gyro from my wpld shelf and then put it in here and try to do rear wheel, drifting, expecting to remove this valve and also if some incident is a front one way div.
So as you brake then from you will continue to spin freely, but the rear view will lock up so it’s like engaging uh handbrake with uh actual car. So you can kick the tail out so excited. Damn it very blunt wow. Is this pink or is this red carbon loss of a carbon parts and also metal parts, carbon shock tower carbon top plate and carbon bottom plate carbon rear shock tower as well some metal parts over here metal shock, absorbers, metal, diff? I think you can adjust the toe over here, so loss of metal parts where it needs to there’s even ball, bearing on the steering system itself. It’S a ball bearing here with tires on all four wheels: it’s, a really nice. I think there’s te quite te37 right, there’s, also embossment on the tire wall itself, max technology – oh there’s, this type of profile, number 265, 20, uh 21 inch, crazy man and at the bottom, when i’m young. I would dismantle everything and rebuild it to ensure the tolerance is right, so it runs smoothly. So, as usual, there’s no manual i’ve figured out all this. By myself, we put this body post on first it’s, not over the bumper, and this i probably do better off camera using counter sound screw. Oh yeah, going in well in the rear. I do know that the body shop hole is different for the front and the rear this one just slot it in here, like that.
You put this clip and this plastic washer with a rough height estimation first, and do the same on all four like that. A little bit like that, like that install four screws here for the servo and notice orientation, the servo horn has to be further away. So this line is correct and then you’re going to only secure the servo horn after you have powered up the servo with your receiver, so it’s centered before you secure it. Okay, before installing the motor you have to install the pinion gear first and that’s, how i roughly uh gauge how deep you want to push the pinion gear in. So if i slide it in now, it’s aligned. Well then, i’ll adjust your mesh and make sure to add a lot tight to your opinion gear as well. So this car and play actually comes with two uh pinion gear: uh. The main content comes with the one, with uh 24 teeth and uh in a separate bag, there’s one with 25 25 teeth, and it seems like the important is just like too small, so i’m going to try 25 teeth Music. So you got to install this three holder with the standard size, rc 110 battery, perfect fitment. So once you have power up, you can install your servo horn. I have tidy up my wires. It looks bloody nice now the battery strap they have given one. That is simply too short, which is really idiot. You see.
This is the reason why i say this has potential to be a rear, wheel, drive drifter, look at the steering angle. This is very impressive man, so this is what i mean after you. Let go throttle you’ll still continue to go forward under its own power, see still going and there’s no reverse no break. Fortunately, i have a programming card. Let’S. Try it it’s supposed for surpass hobby and it’s, not showing any value. So in the video and picture it looks like a cheap body shell, but in real. This is actually a freaking good. Looking body shower man it’s very glossy, like it has been polished and waxed and it’s seriously fun. It feels like a quality, a pro kit, rc drift car it’s, very smooth – i mean from the video you may not be able to tell how fun this is see most of the time i’m, only at like 25 throttle so it’s, really powerful, it’s, currently uh understeer. Now to adjust the camber hole and all that, but most of the time you can control you can control it to drive it. The way you want please go away so all in all i’m very impressed with this hexana dfr. 01. Very weird name feels like a really high quality kit, because you may be able to find a cheaper rc110 cheaper than this. But this kind of setup is a pro kit in the rc were, with this metal parts and a carbon part so it’s.
So the chassis is more stiff compared to those plastic buff top kind of chassis, and this sofa runs really smooth really well. You can really definitely feel the high quality of it and plus it comes with moto uh, the pinion esc and the servo. It makes it very easy for you to get started in this. You just need your battery and receiver and that’s. It i’m very, very impressed very happy with this kit. I think it’s well worth money. The only issue is with the esc, there’s no reverse, and then it still goes forward after you let go of throttle, which is really weird.