Slash like donut, car and uh. This rc car came in this box. It’S called adventure force there’s different ones. This is the remote that it came with um how the box looks kind of net it’s called nano racers um, yeah it’s, just a little. This is about the size of a hot wheels car and uh it’s uh it’s ten dollars at walmart ten dollars, isn’t that bad but um yeah for a little rc car like this ten dollars, not that bad. You could also, if you want um, add uh an exo body like a like a lamborghini uh. You can also add a um just any body of a of any hot wheels car. You can add the body onto it, but there’s a problem. These hot wheels come with a little uh. Well, basically, we have to do is grab a drill and drill into it and then the bottom of the uh. Here, let me show you guys: uh a hot wheels car to demonstrate so right there on the top there’s a little uh notch that you can’t drill or screw drive. You can’t do anything about that. You have to actually actually get a drill and make a hole there until this plastic can pop up – and you can take this plastic out and just be left with the body of the car but there’s a problem once you’re done with that there’s that little notch Right there, which won’t really let you uh, which won’t really, let you add it onto the the motor or not motor, but just the body of the rc car, because this is the one me and my brother both got one, and this is the one.
Without the body and if i try to put it on it, just doesn’t fit plus the lamborghini is a little bit skinny, so it’s not going to fit because of the motherboard, so yeah, but uh kind of got off topic there. But what i wanted to show you guys was to make it into a drift car, so you can drift around. So basic things you need is some tape and scissors and obviously the car that’s all you need. The car is like ten dollars like i said, and you you probably have tape and scissors at home. If you don’t well go buy some scissors and tape, i guess but yeah. So basically, what you want to do is just here. Let me show you guys all right, so basically, we’re done now uh, as you can see, both wheels are covered up pretty nicely. You know the tape over the rim, basically what i did to other wheel, just like that and now i’m going to show you guys how it works. So obviously, when you get your controller and oh sniping on dang it, okay, now it’s on uh another cool thing about this uh rc car is, it has lights front and back. Oh wait: you have to go backwards, see front and back i mean in front and back all right now we can. I can show you guys how it works. All right make sure you guys see the whole thing uh.
No, that looks ugly all right perfect. What the heck man hold up all right, well, i’m, just going to keep on recording to show you guys how to fix that. If it does that, it basically means that either you have something stuck in between the wheel and the actual rod that makes the wheel spin or, like i did right here, you have an extra piece sticking out of tape right there. So all you want to do is just just put it back, just put it in like in the inner part of the wheel, if you can just like that and i’m pretty sure um and you want to just make sure all the little edges are packed down. As much as it can okay now we could try, it see, hold up man. Let me try on the floor. Okay, another okay. All you want to do is grab a little piece of tape. If i can get it off. Okay grab a little piece of tape about that big or well. Basically, it can be any size, just as you want it like that, and then you can grab your scissors and just make a little cut i’m trying to show you guys just a little cut about the width of the wheel of the rc car that you have And you just want to go like that all the way through or you can just rip it off as well. Until you get a little piece uh, i kind of messed up there.
You should take the whole piece off, but we can start off with a little piece and then from there you could add the piece onto the wheel onto the back wheels. Add it like right there not inside of the car, but just add it right. There yeah, like that just a little piece at first but don’t, add any tape into the inside or overhanging the inside. Just all the overhang, just let it onto the rim and then you from that overhang. You could just put the tape over it and put the tape back on, and you just want to repeat this process all the way through it. Doesn’T have to be super perfect, just make it best. Okay, just like that, and then that’s. Why i wanted the bigger piece, because this would have been done with just one piece, but let me just take it off here. Oh, that was okay. Now that we have that piece, you just add it on the rest of the wheel. Remember it doesn’t have to be perfect just at least as it works and just go like that. If you want you could double it double the tape, but just with one round of tape it should be fine. I don’t think you really need to unless you’re trying to get maximum like drift. Okay, there we go that’s one wheel. Let me get a close up like that. Well, it’s not going to look the best. Obviously, if you want to make it look the best you can take off the wheel and do it like perfectly but that’s just doing too much just like that is perfect, got the whole wheel covered just like that, make sure to push the tape down.
So it doesn’t fall and basically what this does Music is make the car slide better. So, when you’re turning, you can just slide better all around all right. Well, i’m, gon na finish the other side and i’m gon na show you guys how it works. Okay, now that you got both wheels done just like that covered in tape, make sure it’s all the way down. You can put it on smooth surface and let me get a better camera angle. Okay, it’s gon na write choppy for a little second, but once it starts going it’s gon na you got ta get a speed what’s going on dude, i literally just what the heck. Oh there we go now. It’S working yeah just give it like a little second and it should start working. I started doing yeah like that and see it starts drifting around and i get.