It actually took me a while to find it, but I eventually found it and it still works, but I needed to get a replacement of key fob for it. So this key fob is a 477 L model and they no longer sell this one. But from what I found is that this right here it’s a 7 3 5 2 L remote. It actually replaces this old one it’s supposed to work the same, and it also says compatible with the 3300 and the 5 303 systems. This is a 4400, but from everything I’ve read it actually works with the 4400 as well looks similar to the old one. At least the screen has all the same buttons, maybe a little bit thinner, and I also got this on Amazon for about 63 I’ll leave a link down below to where you can find it. It also comes with a battery and just slides open on the back. Stick it in makes that annoying noise, just like the old one when you put any battery in and now I’ll show you how to program it. So the first thing you want to do is just turn the ignition to the on position, but don’t start it, and the next thing you want to do is find the valet button and for mine it’s right down here spray paired since black button – and this switch Is just for the remote start, just activates and deactivates it, but your valet button might be in a different spot.
It just depends on where they decide it to put it when they install gear alarm system. So before you get started, make sure you have all the keys that you want to use I’m going to still hold on to this one and use it as a spare, since it was the only one I had, and this is just going to be my main One but pretty much you’re going to press this button eight times and then you’re going to press it a ninth time and hold it and then you’re going to hit the lock button on each key and also make sure you do this five seconds. After turning on the ignition upon one, two, three four five, six, seven, eight nine and then just keep holding it down, you’re going to hear a few chirps and just keep holding it down and then hit the lock button on one of the reviews. You’Ll hear a trip and then do it on the other remote share it again and let go of it and turn it off hear that noise and now they should both work so let’s test it out. Rock unlock locks, unlock let’s, try the remote start, it’s just the lock in on lock button to get it, and they both make the noise. So it looks like they both work and Ewan also has a blue screen which is kind of cool, but yeah. Thanks for watching this video, hopefully you guys found it useful I’m super simple to do.
If you want to see more car electronic videos in the future, don’t forget to hit that subscribe button, and I will see you guys later.