So before we get into the video you’re, probably wondering why there’s a brand new team associated rival mt10 sat next to me. This is for you, i’ve got one it’s just about there. Pa, when i say for you is for one of my subscribers, there will be a video on that coming up, so do make sure you keep an eye on the channel because you want to win one of these. It is the best 110 basher you can get for the money hands down the best. I don’t care what you say anyway, let’s get straight into the video on the vortex. I did break it at the skate park. We’Ll talk about that at the end and then i did break it again, um when we took it off road, but we’ll talk about that at the end as well. Here we go here. We go skatepark durability test, so i bring all my rigs down here. Give them a good test, give them a good test. They’Ve removed me backflip ramp. I had a nice little backflip around there’s gone they’re, putting it back, apparently not for today. So the vortex then i’ve put the um 18 tooth pinion back in it. Had the speed pinion in it from uh, miss speed runs see how it gets on here. Applause it’s, a nice smooth rig. I really like how it jumps. I really like how it drives i’m, not sure, Iako, if it can do a backflip.
Oh yes, so i thought when i initially took this out, i didn’t think it was. Znaš, agile enough, but watch perfect. Oh yeah i’ll. Take it back vortex. I will take it back. You can backflip very nice. I knew that was going to happen. So i got 140c lipo in this today: 5 500 milliamp hour, 140 c that’s. What took this thing to 61 mile an hour i’ve been to this skate park for a while, actually makes a nice change. Oh slap that’s one thing i will say about this: the suspension is a bit too soft bit too soft for this kind of abuse. Applause don’t recommend anyone bringing a rig to a concrete skate park. Obviously i bring it here so you don’t have to this. Is nice very nice Music? It does backflip a lot easier than i thought Applause. Ah, i knew that was gon na happen, wow all good. I know what i’ll say at the moment, apart from my driving is terrible, which is nothing new. Is it let’s get a little bit bigger? I reckon now with the mt 10. I couldn’t quite clear that i reckon i can clear this whoa. That was not what i wanted to do. Took it there didn’t it took it. O da, O da. Oh yes, Oh to je, on his wheels! Oh oh! Oh! Oh, oh dear, i think the motors moved Music right. I think the motor has moved and i haven’t bought any tools with me.
Yeah let’s not do that anymore. Pa, that was a big jump, so it was just a uh problem with the motor moving, so we’ve re remeshed it somewhere a little bit more suitable for this low slung basher it’s not for skateparks is nothing else to do. We need to get back in the game – Glazba, oh Applause, so it did actually take quite a bit of a beating and it done quite well. It jumps absolutely awesome, nice and straight nice and level uh. The only issue i’ve got with it is that lower um chassis, the shorter shocks it’s just a bit soft – i mean you can stiffen them up. I have got the preloads the highest preloads on the front anyway, but the chassis was just banging um after every big jump, so so i’m, not going to say that it’s bad, because it’s, not bad it’s, just not designed for the skatepark it’s designed more for a Bmx track would be ideal for this if you’re gon na send it, you do need to sort the shocks out. I’D also suggest maybe putting some of the the big rock wheels on, and that brings me on to wheels so you’d have seen at the end um. Not this one, it was the one on this side. The wheel was like buckled. The actual hub is absolutely fine. Now i have seen another video with this issue as well. I can’t remember whose video it was um, but the hex in there, where it’s, fixed it’s pulled through slightly so it’s twisted so um.
That might be an issue, so the amount of material between the hex and the um the outer face there. I don’t think there’s enough because it slightly twisted it. I did manage to bang it a little bit to strain it out. If i put it on you’ll see now. That is not quite right. There is actually a little bit of room in there and to put a slightly bigger washer, so you’ve got more surface area cupboard. You shouldn’t really have to do that, Iako, just in my opinion a little bit weak. I don’t know how i don’t know how well you can’t really see in there, but it’s also stretched the hole in there a little bit. As for the uh, the motor issue, i think that was down to me when i changed the pinion back from the speed. Pin into the 18 teeth – i probably didn’t, do it up quite enough and all it done was moved the motor now these are renowned for bending the motor brackets. If you said them too much, this is out of my big rock this one’s. Absolutely fine didn’t bend that tall. It literally just moved the motor i’ve got a crcu one, a machined one in my big rock, and i recommend them so i’ll leave a link to them in description. Very good upgrade for these overall still impressive it’s a decent truck. It’S fast, it absolutely launches, as you see and it’s really good um it’s a lot better at backflips than i first fought so still a decent truck, but in summary, it lives up to the same standards as the rest of the 3s range i’m.
A little bit unsure whether the wheels are going to hold up some hard bashing after that rear one went, but it is as tough as the other 3s range now one battery pack i didn’t, get through the whole battery to pack, and i had to fix it Twice, one of them was possibly my fault for the motor moving and the other one was obviously the will issue. This thing has been to the skate park four times now and i’ve, driven it back every time. So still, my opinion is that these rival mt 10s are the best 1 10 bashers you can get for the money. Remember if you want to win one, you need to keep an eye on the channel cheers for watching. That is the armor vortex.