It really was made to be toy quality and yeah. We could have put lots into it to make it worthy, but I also wanted to give the Art Attack snowmobile snowmobile a chance as well. Now what I did have running was a brand new Tekin Pro for 4000 kV censored, motor bez četkica. This thing is a ripper and this the ESC or for the new people that are to the show. This is actually like the electronic brain. This is where all the power distribution from the battery goes. It tells the motor how fast to go it powers, things like the servos as well as the receiver that goes in for the radio system. Now this here, I don't have to worry too much because it basically it's waterproof and all covered already, but because I have a waterproof servo and these are fairly inexpensive at the time of this filming. Riječ je o 40 USD from what I've researched, and this is thus a Vox, waterproof or SW zero to 3 1 mg. Now this has 208 ounces of torque at 6, volts now it's going to be regulated depending on the battery that you use, Naravno, by this little machine that has a B EC it's, basically a voltage regulator that can run between 6 volts and 7.4 volti ili 5.5 Pojačala, so lots of power can go into this up to a 3 s lipo and still distribute the proper power to the to the servo.

Now I could have gone with a much higher survival rating like that's, ne 208 ounces as a lot but it's not like huge or anything, but really when we're floating on top of the snow with skis and I'm. Not in a situation where my tire is in a row or something I need to move it, you know I think a servo like this is going to be ample and I'm gon na give it a try. So metal, gears and I've got an aluminum horn here. That'S going to give me plenty of power transfer down to the steering, it'll be a piece of cake, so I was waiting a little bit because I was trying to get in some extra parts just so I could do the build that I wanted here we go. I did order wide skis, they didn't have any green, Nažalost, I'm sure I can paint them if I want or if I care, but it is Christmas time coming up. So why not have a look at it here's some different arms? Oh awesome, they actually found out. I was going to be doing a green green bill. Then I was like yeah I'm gon na paint, a Kawasaki, green and everyone's like it's, not Kawasaki. You fool arctic cat, but I'm so used to it didn't matter to me. Zapravo, what I was thinking was. I was gon na do the other one I have cuz it's clear. Just with my friend was gon na help me with Chuck big thumbs up buddy Thanks he's gon na help me with some some flame edge on my other one.

But then I was thinking I was going to go with like this kind of see through green and then Art Attack was like. Pa, we have this green one. You want to try it out and like that's a great idea. So when I ordered all my stuff, which was a pretty penny for meto upgrade all the stuff right out of the gate, but they did have package deals available on the website and you guys can check it out. Tako, whatever I'm looking forward to seeing what we can actually get out of these machines, this looks awesome, Ok, upgraded gear and they actually found a driver for me they have drivers available so I'm glad my son Morris loves the green savage that I have. That is a Kawasaki, so I noticed he'll be a fan of this when we're done so I also ordered instant extra drive belt. So thank you for the viewers that actually said you've had these you've had a successful run and you wish you would have had some extra drive belts. I took your advice and when I was ordering up everything else, I also ordered some belts, so cool it'll be good to have them. You don't, want to be out there playing and having a good time and spent the four dollars and ninety six cents. Even though you guys couldn't see that and just you know got yourself some extra belt, so you could fix it right away.

Ok, so I'm gon na put all this neat stuff away. It'S time to open up the book, stop procrastinating and get into step. One I'll probably make a fool of myself while building this, but thankfully on the website, they do have tutorials and different things like that, written out in the tips section that I'll probably be exploring. As we go so let's get started, Dobro, so I've laid out all the parts, so you can see them my upgraded part and the stock parts. Da, I have two tracks in the background and three pulleys I purchased all three pulleys and two different tracks just so. We can see the differences to see which one works in my Canadian icy winter. I want this project to be a success, so there's the power system there's our driver here over hereis the upgraded suspension arms. These arms here are much thicker, not the gray ones, but the black ones themselves. You'Ll also see the original skis that are here, laying it out just like it's. A full scale definitely gets my brain to wrap around the fact that I'm building a smaller model right. This is basically preassembled just by me cleaning the table and laying it out the way. I think it should be assembled now check it out. This is an upgraded suspension area. This is the dual suspension: idler like rear idler. They have for the track and from what I've read, I wanted to get this right off the bat, jer, if you're gon na have any speed in a machine that works like this you're gon na be taking it off jumps, you know you want to make sure If you're, taking it off any kind of snow drifts, that you've got the right suspension tool and because that snow drift is also in scale, so with this already done.

Nažalost, all the hardcore builders out there that want to see me go step by step in the instruction book are not going to get their wish today. This here actually shows you how to put together the rear, idler and the assembly of it. All of this doesn't need to be done because we've already got this piece preassembled in the upgrade, so it is done and it doesn't need to be assembled. Zapravo, the first place that I need to talk about with you guys if you are going to do this, is to talk about the tracks now these tracks this one here. Zapravo, this pulley system is the one I think I'm going to end up, preferring because it does have those exterior teeth, and this track is already pre drilled for you to have those teeth in there. Look at that let's get this in there. Tako, against the green background, we can kind of get some of the red in for the camera and our one handed filming there we go. The teeth are cutting right into the track. Naravno, it's going to be tighter now that first instruction that wasn't in focus there is telling me to use a heat gun on this rubber track itself, because you can see it's kind of oblong just like a kidney bean shape. We need to heat this up and actually do a lot of rolling, so I'm gon na be working with this to kind of soften it up make sure that it's, nice and pliableand we can have some good adhesion to these teeth this track over here.

The deep lug track has teeth on the inside, and these two spools right here or pulleys are actually the ones that are grabbing these teeth on the inside. I think these ones are gon na work better. I do. I haven't tried it yet, but I wanted to see which ones were better for you guys, so you could know right out of the gate. A lot of people have looked at the Art Attack snowmobile, but haven't got one before or if they did, it was the Nitro one and being an electric buff myself. I love electric. I don't mind going in and seeing which electric one I can build really well to see if we can get some good power out of it. Pogledaj ovo. This is the rear idler that we're talking about over there. These are the parts that I could have used right. Look at this being Art Attack is a home based business. They have these little pieces of paper that come that tell you how to assemble each part individually, check it out the handle bar attachment instructions. So this is for the steering one of the things I can say to my fellow builders, whether you're, a senior builder and don't, know this or if you're, a new builder and don't know this hey guys. If you have any RC out there that you want to build and you can go onto Google and have access to different forums or whatnot, even this one it's right on the website here is a customer's build where they did an electric build and they totally took A picture this picture tells me a thousand words way better than a black and white manuals going to this tells me exactly how the transmission goes.

Tells me where the servo goes. It tells me how the steering setup etc, Itd. So we can almost see here when I take this top off tada I've already pre placed my electric transmission. I know which way it goes where this rule gear is looking for. The belt right. This belt is the drive belt, goes up onto this spool gear and, Naravno, the battery and such will roll underneath here so yeah I do have some work to go I'm gon na have to do it off camera. Zapravo, I can hear my son right now waking up from his nap, so I've got a run but check it out just in case you're wondering this is the bumper and skid plate. This is aluminum, so it's gon na add a little bit of weight. That'S. Ok, I'd, rather have a little bit of weight protecting the front of the sled, especially in the icy winters, and especially from taking it over any jumps right. You want to make sure it's, not gon na crack in the extreme cold we have out here. So remember instruction book use it as you want deal, don't, be afraid to jump in and try it yourself and then reference if you screwed something up haha. S druge strane, try not to power up until you've checked the instruction book to make sure you did it right. Drugi, make sure to try and go out and get yourself a picture.

Google Images has thousands of pictures of RC that's a huge help and number three lay out the parts. If you think you know how it goes together, lay it out how you think it's going to go together that way, you're able to go ahead and kind of start assembling, where you think it's best anyway, guys thanks for tuning in to our sea adventures. I'M. žalostan, I got a run I'm. žalostan, my life is different, but I do the best I can for you and I want to see what kind of heart attack snowmobile we can get together and have some sort of monster snow machine guys.