. You can use the MySubaru website or mobile app to remotely start the engine and, if your vehicle is equipped with certain automatic climate control systems, also set the temperature of the vehicle with the push of a button. To activate Remote Engine Start with Climate Control. First log on to the MySubaru website or mobile app and select Remote Services.. Then Engine Start with Climate Control.. Here you can set the climate control system, temperature choose the engine, run time, select, rear climate zone if equipped set the front or rear defroster select the preferred level for the driver or passenger seat heater, select, the air ventilation or heat mode change, fan, speed and select Air circulation., If auto mode is selected, settings for air mode fan, speed and air circulation will be automatically chosen.. You can then set the time delay if desired. Click next and then enter your Subaru Starlink Connected Services PIN.. Once the vehicle engine has started, an engine stop button will display if using the mobile app. Or a remote engine, stop will appear if using the MySubaru website.. You can stop the engine by pressing this button and then entering your Subaru Starlink Connected Services. Pin. Remote Engine Start with Climate Control will not work if the vehicle is moving., If any door, hood, tailgate or trunk is open if the vehicle has not been started for 14 days, if the cellular network signal is weak or if the fuel light is on., You Can also use the MySubaru website and mobile app to lock and unlock your vehicle from almost anywhere.
. A Subaru Starlink Connected Services PIN is required to use this feature. Under remote services in the MySubaru, app or website, select, lock, doors or unlock doors. All can be set to unlock or just the driver’s door.. You must enter your PIN to activate the command. If any door or rear gate is not opened within 60 sekunde. After using the remote door unlock function, the doors will automatically re, lock, themselves. A series of notification. Beeps will sound five seconds before this occurs. beeping Remote door lock and unlock will not work if the vehicle is moving if the vehicle has not been not been started for 14 days or if the cellular signal is weak.. If you are unsure of where you parked your vehicle, you can remotely activate the lights or horn through the MySubaru website or mobile app to help you locate, to je. Under remote services, select horn and lights and then select the feature to be activated. After you enter your Pin the command will be sent to the vehicle. beeping Once the horn and lights function has successfully initiated a stop. Button will display. Simply press this button to end the command.. This feature will not work if the ignition is on if the vehicle is moving. If the vehicle has not been started for 14 days or if the cellular signal is weak. Forgot, where you parked your car, Subaru owners can now quickly and easily find the specific location of their vehicle using the remote vehicle locator.
Under remote services in the MySubaru app Or website select, locate vehicle., You can then enter your PIN and the command will be sent to the vehicle and your vehicle’s location will display on the map. Remote vehicle. Locator will not work if the vehicle has not been started for 14 days or if the cellular signal is weak.. Subaru Starlink, Connected Services conveniently puts access to these features in the palm of your hand..