That many people will argue is the traxxas x maxx killer, which in my opinion, is the world’s best rc car. So the creighton exp is a good contender, but it did have a couple of problems, the main one being that we bent the chassis. Oh dear, look at that now on the smaller clayton exp. We had the same problem and the solution was a radical rc bash bar that just bolts onto the bottom of the chassis. It just stiffens. The whole thing up – and this thing here took an absolute hiding and it made it like a hundred times stronger, so dean who makes the bash bars from medical rc is coming over with a bash bar, so we’re gon na straighten the chassis, then we’re going to Fit it and then we’re going to take it out and give it absolute hell to see how well it holds up. Do you have a job you hate? Imagine if you could make more money from the comfort of your own home. That was my dream and it became a reality once i started. Selling on ebay and i’ve now taught hundreds of people, my secrets, so just check out the results here from some of my students. So, if you’re sick of that 90 or 5 – and you want to make more money than a doctor from the comfort of your own home, then click on the link down below and i’ll show you how also both chassis brace and the steering rack.
So we’ve got to fix that too, in the rear arms got a crack in it. Here. Look but i’ve ordered some rpm ones. So hopefully this will last until they turn up. We overheated the motor and it started cogging. What cogging means is that it can’t make its mind up really, which way to go. So when you try and accelerate you just sort of go so we’ve got to see what’s going on there too. Waffle, waffle, waffle so with the exp chassis being a millimeter thicker than the stock one, the machine parts out so that all the standard parts still fit. This chassis really does look impressive, but i don’t know i don’t know why it been guys. I mean 1775 is supposed to be the pinnacle of rc chassis, but maybe they just use some chinese grade. I don’t know so. Let’S have a look now where we need to straighten it and by the looks of it around about here somewhere uh here and here something else. I just noticed look at the motor guys it was slamming down into the chassis. Look here, look you can see. Little stress cracks on the anodizing starting to make the end of that motor egg shaped, and you can see here on the chassis where it’s been hitting so once we’ve got the right gear mesh set on this we’re gon na shove, a bit of mastic underneath the Motor just to give it a little bit of cushioning like we did on the 6s rigs all right, let’s, try and straighten this jalopy.
So we got it pretty good at the front now at the front here it’s supposed to have this little bend here, but coming on to the back, we still got a bend here and here oops too far, guys i’m having a really tough time, believing that this Is actually 70 75, it just seems to bend so easy and it’s supposed to be a 7075 t6, which is supposed to be the best grade now i just want to compare it to this m2c chassis and bear in mind. This is only four millimeters thick, the exp chassis equation. Chassis is five millimeters thick, so we’re gon na hit it on here the same as we did the other one and yes, he has got extra bracing on here, but that phrasing isn’t going to have anything to do with if it bends across here or not so There we go we’re starting off straight well, that’s how hard we hit it on the crate and one to start with and it’s done, nothing yep, still nothing. Music, yep still looking good, so yeah! This is definitely made out of a better material. I’Ve got a funny feeling that this is telling porkies overall, i really do like this truck, but this chassis is a major major disappointment. Personally, i would much rather pay an extra 50 to 100 to get like a proper chassis like what m2c uses. What do you reckon guys give me a note in the comments? Next, we got ta fit a new steering, rack Music, so guys one big big spot on these is that the screws they pull out the bulkheads really easily really doing big jumps, but you can get longer screws in we’ll just see how far we can go in Then we’ll go over to my little screw.
Drawers and, more importantly, are these ones here so that’s how long the screw can be and a stock screw. Look at that it’s a little bit short, but you can actually get a drill and drill these out to be a little bit deeper that’s going to make it a lot stronger. So here i’ve got a four millimeter drill bit so now we can get these 25 millimeter long screws in we compare that to the stock. One look: we’ve got a lot more thread on there and then, if we look under here, you can just see the tip of that screw poking through the bulkhead. And if you want to do the same for your one, just type in m5 by 25 countersink screws into ebay, then we’re gon na go ahead and do the same in the rear. So for now, we’re going to leave these screws here out because we’ve got to put the bash bar on there anyway. So next i want to plug into batteries and power it up and make sure this motor. Now that it’s cooled down is not cogging it’s. All right now guys i’m gon na have to get a small opinion. I haven’t got one yet so we’re going to take it out as it is, but we’re just going to make sure that we’re not going to overheat. It we’ll just run it for a couple of minutes and let it cool down all we got to do now, wait for dean to turn up, fit your bash bar and then go out and give it hell good afternoon hey.
Where are we? We got mr bashbar in the house, mr bashful, mr dean himself, that’ll be name yeah. What you got for us new creighton exp with the new 7075 t65ml chassis, but you’ve still managed to bend your legend i’ve already told him all that bit. Have you okay? Tell him again and we’re gon na pop this on now, so we’ve got an allen key for them. That’S a couple of seconds you’re, making hard work of it: okay, oh yeah, boom boom Music boom that took probably five minutes. Oh look! We got in and clear in the house. Oh look what happened here. What are you reckoning? Oh that sounds like it broke me all right, so now we’re going to take it out and give it hell. Here we go Laughter: okay, there’s, making friends again: that’s nice troll, you got there. Dean, it’s, nice, it’s nice to get out from your your boot. He’S got a corelli jumbo techno et crater knight s. Oh he’s got his best ball near his skin yeah. He just got best bonnie. Of course it has the team quality. One. Oh check that out all that fits nice around all them let’s get placing it almost as wide as the chassis looks how long they’re gon na last you today i’d like to get ten minutes. I, like you too much what about this yeah but it’s a bit it’s a bit cold, the best batteries you can buy tesco! Oh nice, the finest tesco fighter.
Oh that’s, a bit rude! Oh yeah! They are. They are a bit rude: Music, jesus Laughter, it’s, only water you’re, not you’re, not made of sugar we’re gon na run dean’s ones first, and then, after that, we’re gon na get my one out where’s that vhs tape Music. Oh, what happened that’s popped out! Oh no! Did they just pop back in oh, i think you could really take it apart, how many idiots Music? Oh, oh, oh what’s, going on he’s a madman testing the durability of that flash bar. Look at a minute! After all, this see how straight it still is. Oh man, i feel bad for it. The pogo rally, oh wings, hanging off he’s, a madman just tested it how’s the bash bar. Looking perfectly fine, oh my god, oh battery’s, out rambo, oh we’ve, broken it oh or the weedy bar mount. Is that the car’s fault, or the driver’s fault, driver’s fault, we’ll, see how chassis? Looking like perfectly straight, let me be the judge of that straight as a die rounds. Number three. We got all the spectators got dad over. There look he’s, 20 years old and he’s got five children. Oh there comes another one: six children, oh no! Here we go round round. God knows: oh, he landed it nice in up there without cast, which is now notorious. Oh nice landing. Oh oh, killed it. Oh it’s, just pop that out again, you’re gon na have to get radical rc to make something.
Definitely that’s, not good. It goes in. Oh he’s killed it. Oh my tough baby. What happened how’s that coming game over oh but i’ll, just go, get the plug. So we can kill this. Oh no! Next victim, oh no! Oh, he landed. Oh, i think we’re good Music! Oh, are we looking on the old chassis? Looking straight pretty much, i ripped it Music, oh Music, Applause, Music, oh my god, poor creighton, oh dean’s, been brave. That’S stupid here we go ready, steady, go! Oh, oh! Looking perfect! No, i think we’re good! Oh no! We killed a shark it’s, not broken. Just pulled it out. The bottom what’s going on down here. Bingo wings got two heavy cavs. Oh so my one is kinda fixed again, it might not last very long it takes it. Does your forward flip Music Laughter, so good? Oh, is that looking a bit yeah pulled oh bent, the pin yeah oh in the face. Oh, this could be a basketball, tester couldn’t. It look. Oh take the camera off, that’s, perfect, perfect wow, and that was a right that was, that was a chatty right off right there right there, you go guys if you want to get yourself on these bash bars. For your rc cars check out radical rc link to that’s, going to be down below and that’s the cheapest way to make these things durable, quick speed run. How fast do you reckon it’s going to do across the grass? What do you look like and i reckon 60.
it doesn’t look quick, it’s, quick, but i’ve got about 60 quick i’m going to go with 55. let’s go ah cut out. Oh it’s got warm it’s over geared well it’s.