We do everything from fashion crawling speed, rounds, unboxing, reviews and much more so if you’re new here consider subscribing that way, you won’t miss out on any of our future, the adventures and in today’s adventure. You already know amber’s building your very first rc kit versus anything. In fact, i think it’s, the first time she’s ever held a screwdriver, so this should be a lot of fun, so this is going to be part. One of a four part series in today’s episode, i’m going to be doing the axles in the second episode, i’m going to be doing the chassis and the electronic and in part three am, is going to be giving it a paint, job customizing it to her liking And then, in part, for the final episode, it will be the full review of this g500. Now man, when i told amber, i got her a g500, she was. She could not believe it. She was so excited. I know i know it wasn’t the one to one scale that he wanted, but it’s close, close it’s 12 to 1 scale. At least you can drive this thing, and at least she can drive this without a license i’m going to make this an easiest possible guide to build this g500, because if i can do it, then anyone can do it exactly. This is the perfect beginner kit and we’re going to prove that to you in a minute and look go order yourself, one there will be links in the description below where you can pick up this g500.
There are two models: there’s a k and there’s a ks model. The ks model comes with some extra accessories and then at the moment, with today’s shipping times, you should get it by the end of this year and the series should be finished by the end of this year. So it should time out pretty well jokes aside: the shipping is actually pretty decent time from the shop and also the best part about the shipping is free, so go check out those links and use our discount code, the rc kiwis, to get further discount on this Rc there will also be a special code in the description it will give you more discount that’s only going to be valid for 24 hours at posting. This video build along with me. You can get it for yourself, your mum, your dad, your kids, your brother or even your wife, yeah that’s right, get it for your missus and tell her hey, look, say: hey i’ll get your g500. I promise you she’s gon na be over the moon. When you tell her that and when this arrives, she might be a little bit disappointed, but just tell her hey look if you build this and you come play with me outside with some rc’s, maybe in the future i’ll get you a real life. G500. Maybe i’ll get you a real life g500 when we hit 1 million subscribers now. Remember guys, this is a kit, so you will need to supply your own esc, your own lipo battery and your own transmitter receiver.
All right amber that’s enough talking let’s get into the workshop and begin part. One of this four part series of the build of the g500. Now i do try and keep this video short as possible. So there are a lot of cuts, but don’t forget you can pause along the way follow, along with your instruction manual and don’t, forget to pause when needed, use the diagram and scale to ensure that you’re using the correct pieces now let’s get started with step. One of building your front axle, Music, Music, make sure you’re screwing firmly. Otherwise your gear mesh will be wrong. Music don’t be afraid to use a generous amount of grease if it won’t fit. You may need to tighten the screws from step. Three Music check that it’s, nice and smooth, but expect a little resistance. Make sure that you get the correct Music orientation. Be careful not to do this too tight or there will be too much resistance, Music, not too tight or you may get some Music binding. Music Applause, Music, food, Music, Music – i will send to the servo in part two when i install the electric Music now the front axle is complete time to move on to the rear Music make sure these screws are tight or your gear mesh may be wrong: Music. Music, it should be smooth if not try, tightening the screws from step 10.. Music blue, make sure not to do these too tight or the drivetrain won’t be smooth Music and congratulations part one completed well.
There you have it. I hope that was helpful as you go along on your build with your g500 now amber what were your initial thoughts on the bill when i first opened it i thought. Oh, i had no clue but actually it’s quite easy to understand. I’M glad i had you there just for your wise words along the way. Ah, super easy build guys. If i can do it, as i said you guys can do it so yeah. I would recommend it and i’m looking forward to getting through it. Actually, you have to say amber i’m, pretty proud of you for getting in here. Doing your very first rc build done, listen around about an hour for your advanced users. You probably just done it about 10, 15 minutes, but nevertheless it’s a lot of fun. Building an rc remember guys. This truck will be linked in the description below, along with the electronics that we’re going to be using, and we have that discount code, the rc kiwis and that other code that, if you use it in the next 24 hours you get further discount now remember this Is part one of the four part build series in order to not miss part two next week make sure you go ahead and you hit that subscribe button.