This is a 132 scale and this is the long wheelbase land rover defender also known as the land rover 110. This is kit. 0H. 32A03. I purchased this from banggood and i did purchase as a full set, so i also ordered at the same time the d4l, which is a fabulous piece of kit to go with this lovely land rover, and this also includes the fully integrated speed, controller, sound module and The leds, the kit also comes with the servo and the motor you have to purchase a battery, so a 7.4 volt 2s battery which i’ll purchase, and you also have to purchase, paint and things to do. The bodywork, but let’s have a look inside the kit. So, first of all, let’s have a look inside this wonderful kit. Shall we and see what we can find so of course, first things. First, we presented with his lovely manual and then an array of lovely pieces that you need to put together wow and that does look good and all the packs are labeled and lots of intricate details. You can see metal parts, plastic parts and, of course, the bodywork and the wheels and to help me build this. You also need a or recommended that you have a better hex key uh hex helen ski screwdriver. Um i’ve opted to go for this screwdriver, and this is the vera 0.9 of a millimeter hex drive and i don’t know whether that’s going to pick up on there but uh as you can see, it’s quite small, and it helps with the building and just that’s Going to pick up the number, the number of the item there and that’s available from most good hobby stores or even pop yourself onto the normal sides that we we i’ll, see enthusiasts shop around on and uh yeah.
This that’s going to help me make sure i don’t strip and break any of those delicate screws that come with this kit. Like i mentioned before as well, you also get the servo, and this is the servo look at that: it’s, a nice, tiny, servo and also not forgetting the motor and gearbox. This is integrated and again look at that believe. This is going to be the 500 rpm and noted by there. You go so should give me a balance of power and torque, so you get that minute too. So i’ll unveil and lay out the components. So this is the box content and parts bags. A b c d e one e, two f and x x looks like it contains lots of little screws and screw bags with a screwdriver. Just like a wheel nut. I believe there is in there somewhere uh a hex key yeah there’s, the executor slipping itself behind the x symbol and uh wow. They can pick those up those lovely wheels, grey, rubbers and foams as well and body parts gearboxes, transact maxwell’s. In fact, sorry axes. Wow lots of hours of fun for me to do Applause, wow i’m, not forgetting those axles, look at those wow that’s going to be some fun and um. Just to give you an idea of the scale um. This is the the main body that comes with it. This is the fabulous longwheel based defender 110 body and uh yeah.
This is my my rule here. So just give you an idea of how long this is it’s micro scale and you’re. Looking at 130 130 millimeters, wow 130 millimeters get a better look at this once i’ll, take it out of the packet but you’re. Looking at about 50 millimeters wide and approximately 40 millimeters, 40 millimeters, roughly high wow, but still lots of detail on the body work to pick out so looking forward to giving this spray paint and see how this turns out and next i’ll reveal the electronics so to Go with this, i also ordered the d4l, and this is the radio gear specific for these micro. These micro scale models and again you get the fabulous instruction manuals there’s. A lot of converted chinese to english, which, from my experience of uh my engineering days when i used to deal with the koreans, uh, can be a little bit challenging because they conversion from their language to english is quite troublesome um, but they do get there. Eventually. Very good, very proud, very clever in their ways. So here you are the d4l and again you get the combined receiver and sound controller and motor control and asc all combined here and just to show you what this thing looks like again in there that unit itself is just about what’s that 34 34 35 millimeters Long and around about 20 millimeters wide about nine nine and a half millimeters in depth, how they crown those electronics inside such a small package.
So you can consider this controls the lights. It controls this, the esc. It controls the sound module wow how they, how they got that all crammed in there clever, very clever. You also get the leds, you get the surface, mount leds and the normal leds. You get a little sound box, so it produces sound distribution, module and cables to connect in and not forgetting the controller itself. So it looks quite a nice controller display on the top that’s. Quite you know what that’s quite good. I mean i’m impressed very quick to level out one handed if you needed it, but um yeah wow quite impressed with that. So yeah there you go that’s the d4l system, so that’s my new project, um, so i’ll get on to the first stages of the build and uh. Once we built it. We’Ve got something now that we could use indoors when we’ve got some wet weather, which we get quite a lot of um and it’s a fully proportional system. So i can have some fun indoors at the same time. So yeah looking forward to that, and thank you very much indeed for watching and uh, i shall see you on the next one uh.