This is the most recent version and it’s got the newest firmware, and all that i ran the 34 tooth pinion gear with the 47 tooth spur gear, and i want to say it was somewhere around 52 or 53 on the grass field, and it really felt like It could take more so that’s what we’ve done i’m going to put a 42 tooth pinion gear in this thing and see what it’s got take a look. 34 is what came out of it. 42 is going in so yeah pretty big difference here. It is ready to go, you can see. I got the big 42 on it now: the batteries of choice, the power hobby, 7200, milliamp 100 c. So these have the xt 90s, and these have the os eights. I guess it is os e8. So some of that, so i do have adapters i’m slowly working my way to convert all these over to these, but i use these batteries in the x maxx. I use them in other vehicles, kind of a challenge anyway, i’m going to get this thing powered up body on and outside so it’s possible. I may not have the mesh perfectly wrapped, but we’re going to go ahead and get a speed run. Um that’s my run. Of course i got into low 50s. I think on the grass let’s see if this see what it can do in the sand. I almost went over a few times. Wow did not get it top down.
I have a few guests out here today, so got to be a little extra careful! Oh, this thing is just coming up and of course we got some donuts out there, so whoa that almost got wild didn’t it only 46 did it get slower, maybe it’s faster on the grass we’ll. Try this again see if i can get it keep that front end down. Oh went over, hopefully everything is still on, but i had a good run on that one. The front end just wants to come up there. We go, looks like 52 52.2 that’s, weird looking. Okay, so on the sand i’m gon na, take that i think it’s got more in it, but uh the front just keeps coming on up. Can’T really do anything with it when the front’s up right – oh maybe a backflip. Now that the speed run part is done. Not all that impressed, but still, i think, it’s, probably a little bit something to do with sand and all that wonderful stuff i mean i did get one good run. Anyway. We get to have some fun now yeah. This uh definitely got more wheel, speed it just wasn’t able to put it all to the ground. Music did not have enough of a launch to actually do anything on that. Oh nice Music thought i was gon na get to save it, not exactly sure what i can do here, but i think we can do something barely got that backflip wow.
That was a good one. Oh, this is where i can break things getting crazy around this area – i’m just kind of babying it. I know this area here can get really wild. Like that, i thought i broke the windshield well, that folded pretty darn bad. On that i mean i got it patched so, and bodies are one of those things that you’re going to tear up so that’s. Why you don’t see me spend a lot of time or money on bash your body, not even really crawler bodies so Music. So this once great hill little jump, you know table top thing as awesome as it was it’s just kind of washed and torn down by a little bit of everybody, including me, oh, been running it pretty good. Here we have the fan isn’t, even on which um well probably should have plugged that up, but let’s check this temps huh see 102 153. Ah heck motor’s running great now, let’s check the dsc that i forgot to turn the fan on 136 137. Oh heck things running great, no temperature issues at all. I think it’s gon na stay. I might adjust that gear mesh a little bit for sure may as well check battery temperatures. That was a good drive and as far as the speed goes, i’m pretty sure it’s got more in it. Just keeping the front end down was the issue with that. You know um, i think. Maybe in that grass field it would probably get a little bit more and it did seem like it really want to bring that front end up a lot.
I was really surprised at how how peppy it was. I mean the 1100’s got a lot of pep in it and that’s a lot of the amp draw that you get out of that. But this system took it fine. You guys saw the temperatures right at the end there um, i actually took it several passes up and down. You know full throttle to make sure i had enough heat in it, and temperatures were good. I don’t know if i unplugged the fan for the esc or if it came unplugged while i was moving some wires i’m, not sure, but either way. That was a good temperature check for the esc too. So, hey everything did fine um the backflip over the sand. That was pretty awesome. I was able to get a few other back flips with it. Um really aired it out over that one dirt, pile just really put it out there um overall, just a good run, a good run with it batteries. They were up a little bit about 133. I think it was that’s a little warm for batteries, so yeah, but regardless, oh ambient temps were about 78 out there so nice floor today anyway, guys in that description, we’ll put links to the outcast 8s it’s, not exactly like this one, but it’s about the same Dimensions but um i’ll also try to link up the vidivon parts and pieces that are on here, because there are a lot of them: the bulkheads and knuckles.
All that stuff, the m2c chassis, the castle system, i’ll put all that down below, so guys, uh make sure you check out that description. If you don’t know where the description is because i did, i was asked this there’s a little arrow thing down there. I believe it’s on the right corner, if you click that it actually opens up the description, and you can see all kinds of things so anyway, guys check that description, use those links, amen, ebay, amazon and horizon. They are affiliate links they help out the channel. Quite a bit and guys make sure you, like the video, make sure you’re subscribed and thank you all for watching guys. If you like what you see hit that like button hit, that subscribe button and ring that bell. So in the description. There’S a link to become a channel. Remember if you want to become a channel member it’s, a very simple two dollars: five dollars, ten dollars or if you really got some money 25 a month, it’s a simple way to support the channel so get that and i am doing monthly giveaways for members. Only so you might want to consider it so guys here’s, those links make sure you’re subscribed.