You do not need your other font to program this remote special thanks to usa, remote website instructions for 2009 ford explorer were missing the first step and thus did not work for programming the remote. After a quick google search, i found accurate instructions and was able to program the remote in less than a minute. Here are the correct instructions for a 2009 ford, explorer, 1. close all doors and then open driver’s door and press the unlock button on driver’s door panel. While doors open and insert key in ignition, this is the step missing from the website. Instructions 2. turn ignition from off to run 8 times within 10 Sekund. With the 8th time ending and run door locks will cycle to confirm programming mode 3. within 20 seconds press. Any button on first keyless remote door locks will cycle to confirm programming 4.