as usual. If you have any questions or comments, leave your questions in the comment section below or email us at info csmi.com.edu. Now we want to thank carbolite because they gave us this machine to do a review on it and hence we’re able to share this good quality entry level machine for those of you who are trying to enter into the rc market and have a limited budget. This is a very good machine, uh to something that we can start off with so let’s get into it straight away. I’Ll give you some dimensions: um in the box, both in metric and imperial for our customers in the u.s. So i already measured it up. The total length of this machine is about 68 centimeters, który jest 680 mil or 27 Cali. The width is about 28 centimeters, 280, mil or 11 Cali, and then the height is about 36 centimeters, 360 mil or about 15 Cali. It weighs roughly about 9.2 kilos, which may be about 20 pounds or they’re about so i’ve already cut the box to make it easy for the for this video um. It comes in its own little case. Więc, jak widać, um it’s got its own little transport case and it has a handle on the top. So you can actually transport it. It’S pretty handy. The box is pretty sturdy uh for the construction, to jest, całkiem nieźle. You can store stuff. Na wierzchu, that’s pretty strong good to transport and keep the model safe.
Now this is what i like about it. You’Ve got two sets of latches, you open the box on this side and you actually have the machine and then you rotate it on the other side. Put the latches and you have the manual. You have the charger. You have the oil filling box. You have the radio and there is a battery. Now we can’t ship batteries because of the uh airline and the regulations uh, but certain countries we can and if we can’t we will ship it out of the battery. But in general we can’t ship batteries, więc tak. So that’s the two side of the cases for storage, as well as keeping all your spares everything stays contained in one particular box and then it’s, nice and safe let’s go and talk about the machine itself. Będę, pull the machine out in a second, so let’s see get this out here. So here is uh the mirrors that just clipped out well, i took it out of the box, so something you guys can be careful with they actually clip on so it’s, not too bad they’re not broken, but something you probably want to be careful while you’re taking The machine out of the box so i’ll leave that for this at the side for now and then i’ll get back to it later, so they can be clipped on so it’s, not a huge drama, uh well crafted machine. Let me just get the camera a bit more closer, so you can actually see so pretty good construction from what i can see.
Uh fully metal there’s, no plastic parts uh, you got hydraulics in it, so you got a pump. You got valves, you got hydraulic lines, pretty good crimp connections. Uh i’ll bring the camera a little bit more closer to show you the detail. So let’s go in up here. So pretty good uh, crimped connections, um on the hydraulic lines, Metal, cylinders, two mil hydraulic hoses. So this is what i like, and this is where the detail is you can see. It does have uh the fasting mechanism that they use in the real machines. Where you have a pin, you have a teardrop, and then you have a securing methodology to keep the pins in place so they’ve replicated that detail so that that is what scale modeling is all about is having good quality detail. The doors don’t open, but the cab is full of metal, and then you have the battery compartment here now. You’Ve got to be careful, because this is a 2s or a 7.4 lipo battery that you need. You couldn’t fit a 3s anywhere because of the plug, but it’s also engraved on the inside. That tells you it’s a 7.4, so don’t try to put in a 3ds because you’ll just burn the hydraulic straight away. You won’t even get a second chance. Good good paint job you can see there’s a lot of gloss in the paint so that’s. What i like to see um, Tak myślę, for an entry level, machine it’s, całkiem nieźle, for what it’s going for what they’re offering you got metal tracks up there you’ve got also you’ve got some other details like there’s mirrors on the other side, jak widać, Po drugiej stronie, there’s mirrors up here overall, i think the machines not too bad simply because you’re getting radio, uh you’re, getting a full hydraulic machine and you’re.
Also getting you know the tracks and everything is metal. Więc, Ogólnej, i think for an entry level machine. This is pretty good value for money. Uh let’s give you some dimensions on this, so the width on the tracks, total width, is about um close to 200 mil uh, which is slightly seven and three quarter inches. Each track is about 50 mil or two inches length of the track tip to tip you’re. Looking at about 11 inches or 28 Milimetrach, 28 centimeters or 280 millimeters uh total length of the machine with the with the stick folded is roughly about what is it um it’s about uh two feet, roughly so 24 Cali, that is about 600 A, 600, milimetry lub 60 centimeters uh what’s the height, so the height is roughly about seven and a half inches, which is about 190 Milimetrach, więc to jest, all that we have on this particular video we’ll go into more detail on the next video and i’ll share that on the next video.