Nie, i did not sneeze lesu just came out uh with two hydraulic, wszystkie metale, skid, loaders i’ve known about these for months, and i knew that if i brought in one uh and put it together, everybody would want to see the other model as well. So being the crazy rc fanatic that i am because lately i’ve been really focused on the 124 scale and the 1 18th skala, indoor trail course with my smaller trucks and the whole collection and doing competitions and all that stuff. You can check that out. On my other channel rc sparks tv, but every piece of equipment i had to work on it. That would be heavy enough to move any dirt. Uh is really too large, and i thought if i had a friend come over, they can go ahead and you know kind of try it out on the course with me. As some of you can see, i have quite a few rc’s that we all have fun with here, just because the hobby is so great let’s do a double unboxing and see what the differences is, because this is wheeled. This is tracked. Viewers of my show know that i have a full size. Radio control, skid, steer and i’m excited to be able to use this with my son, uh or my friends, so let’s open it up and see what kind of build we’re getting into all right. We get to discover it together. You guys ready for this.
Here we go uh huh, i can see the models are different right here, the lt5 114 scale and then the lt5 lt5h. Tak, a dual build two at once, can he do it? Tak, these are the rc’s. You were looking for now granted. I do understand. These are very, bardzo drogie. It took an arm and a leg and me donating a kidney for me to get these, but i am a big fan of their products, even though they do have some hiccups. One thing i’ve noticed about lesu as a company is when there is an issue they go through to great lengths to fix it. Oh my gosh look at this. The dual drive system and brass weight up front. How heavy? Ah, i don’t know it doesn’t feel like a full pound but it’s pretty close there’s the transmission and the brushed motors on there. You can see it’s been cut out. This one must have a drive similar look at this. Is it the same motor because there are differences already? I can see look at this in the two cans there’s a difference, but it doesn’t look like there’s a difference in size – O Boże, there’s so much innuendo in the rc hobby. I got to tell you so that’s interesting. What else do we see there’s the bucket that’s, the bottom of the bucket? This is the bottom of the bucket. Oh here’s, the wheel cool come on focus there.
We go so it’s already pre assembled it’s, a very soft rubber. Let me see here, wow it’s gorgeous. It looks so good, Okk, so for those what about the tracks over here? Aha (Aha), and so the one thing i’m wondering – and this is why i brought in two – even though they are a premium product don’t, get me wrong. I love all rcs of all budgets and all sizes, but when you’re getting into metal and when you’re getting into hydraulics it’s very very difficult to come across inexpensive ones, ale tu idziemy. This is what i was wondering about. The tracks that’s a great tread on the outside, but one of the things that suffer from tracks – and here i’ve got plenty of experience with tracks over the years. Even the other brands that have come out with ones more recent is on the inside. It tends to slip under torque so i’m interested to see. If that happens with this one, you know and that’ll be good for us to experiment with a lot of people are always you know, kind of upset. When i bring in premium products like this and they’re like why don’t you do more, Niedrogie, stuff and really it’s. So i can test it out as well. If i can do it and test it and see if it works, then i can tell you if one day you want to, Wiesz, save up and get it which one works.
The best you know, and in my and that’s a personal opinion and things change all the time, but at least you have more education than you would have if you’re just looking on the internet wow, this is going to be the back of it. I saw these unpainted on the lesu china, facebook page that’s, what it’s called and uh. They were gorgeous unpainted, look at that already wired and done with the motor that, oh sorry, what you guys are looking at i’m so used to doing these, where you guys might not have seen it before what you’re looking at is. This is the brushless outrunner motor and this motor turns a pump that’s right here. This is the hydraulic pump, and this is the valve block right here with these servos, these servos open and close the valves that are behind this plate which allow the um the fluid to flow in and out of the pump. So we’ll have to hook this up to some more hoses and whatnot, but that is super super cool. Is this? The only layer is that all of it in one? Let me see i want to try to lift this out here. Come on out of there is this: give it up i’m getting the feeling that is it. It is there’s only one layer that is incredible and look at this. What they actually have instructions now, no way awesome all the motors everything so basically, i’m gon na lay this out instead of just babbling on here.
So you guys can have a look at what’s in each kit. There you go all done the way you like to see it. The way i like to see it as well neat and organized when i do a build, i find being organized is the best thing you can do. Lay out every piece make sure you have all the parts. I love the fact that lesu, actually individually wraps every part that’s necessary, keeps all the oil and stains and whatever off of it, i always make sure to recycle all the plastic. So it can go back to wrapping more rc parts later so there’s the motor and the block on that side here is the chassis here are the hydraulic rams and here are the lifting arms the wheels like i mentioned. They are very sticky which is going to help aid in traction, and then there is the wheel adapters that are brass and weighted. Here is the small hydraulic tank where the oil will be going and returning to here’s the pivot points, here’s the teeth for the bucket. They come pre painted black, i guess Applause here’s, the coupler which will couple like take on and off the bucket from the arms, a następnie, Oczywiście, the two piece bucket, which i think is one of the really cool features about this model right here is that It’S going to be able to open from the bottom and grip things as well, i wonder how well it will grip, i know you’ll be able to do dumps, and and but you should be able to pick up logs with it too i’m talking about the skid Steer i’m not being dirty here’s, the cab section.
This is probably going to be the forward section of the window and then the two doors on either side. I really like the glass, even though it’s got that green tint to it. It kind of adds that 80s space age look that’ll, really kind of set. This whole skid steer off now so that’s, the wheeled one. These this is for the wheels to go through and the axles i’m assuming important. Those are brass, nice and heavy. On this side. I unboxed the tracked one and what are the differences? Well here are the two tracks and then you get a whole bunch of rollers just like. If you guys watched when i did the excavator and then this is going to be for the idler gear, probably for tensioning, and then there are the two carriages and then from that point back as you start to look into it as one would expect there’s, not A whole lot of difference, to jest, really just the drive line right so again, you’re still going to get the speaker there’s, the esc.