610. Pro touchscreen balance charger. I know you guys seen me: do the unboxing now we’re going to go ahead and open this up to go over? Some of the features that this lipo charger has give me one. Second, while i get it out of the box and we’ll be right back a few moments later, Está bem. So here we have the gt power td610, pro out of the box on the table. You got ta love that sound. So what comes inside the box? It comes with a stylus, pin your power cable, your cords, which it gives you banana clips female dean’s, male deans, e, em seguida,, É claro, if you’re out in the field, and you need to power it up. You have your banana clips for your car battery or your power supply. If you have one of those, so we’re gon na go ahead and get this plugged in and turn it on and we’ll be right back with you, Música, okay and we’re. Back now we have the td610 pro plugged in so this way we can go over some of the functions and features of this balance charger by gt power. It is a 10 Amp, 100 watt charger, like i said it does come with a stylus pin i’m going to try to keep my hand out of the picture. But down here you do have memory storage so on this first one it shows lipo, 2s, 7.4 volt fast charge. So let me go ahead and zoom you guys in real quick now that i have you zoomed in model memory.
1 is lipo 2 Em 7.4. Volt fast charge, 7 point or 14.8 volt fast charge 4s, so we can go in and since i don’t do a lot of fast charging, we’ll select fast charge and it says, are you sure to read settings? Sim? OKEY, so we can make changes and go lipo change from fast to balance charge, which is what i typically do. É claro, we want 2 cell 7.4 volts our charge current is set at 5 amps discharge current is at 1 Amp. Typically, what i do when i charge batteries and i’ll show you i’ll cover the charger real quick. So if i’m charging a 5200 milliamp battery pack, my amps will normally be set at 5.2 amps. Então, basicamente,, what i’m trying to say so let’s pull out the 6s battery pack, so i would charge this battery pack at 6.5 amps. If your charger allows you to do so, most chargers only allow you to go up to 6.0 amps it won’t. Allow you to go any higher than that with this td 610. Como você pode ver, you can charge at a rate of 10 amps all right. We won’t do that for this video we’ll go back down to 5 amps confirm so now we have the lipo let’s zoom out a little bit. We have the battery pack plugged in again 7.4 Volts 2 cell balance charge 5 amps. We hit start, and you can’t see it down here, so now it kicks in on this side.
It shows you your temp up top your end, temp your out, temp, your current charge rate is 4.9 amps the power, and then it shows you your time in the top corner the status. It shows you, your out. Your average i’m still learning this charger myself. So here you go, it gives you a better look at the charger itself. What it’s doing while it’s charging gives you your milliamps down here so right now this battery pack is sitting at about thirty percent, so here you can see also cell one is at three point: Seis: nine volts cell two three point: Seis, nine volts as well, so I’Ve had these battery packs for a little bit over a year now and they’re still holding on strong, so again guys. This is the gt power td610 pro touchscreen balance charger. If you don’t have one go, get one there’s, multiple options that you can use on this it’s, your boy, coach, drc, don’t forget to hit the like button. Don’T forget to comment.