We got these uh horns here. These are the original tires that all my limitless comes with and we’re going to balance them, because i am going to do a speed run this coming up sunday and i’m. Looking to get like 120 or above mile per hour, so this one i balance as you can see, wait right there all right. So i want to show you how we balance these tires. We have these sticky weights got a scissor and i did balance all of these and uh. What we did is we mounted this tire and we’re going to spin. It really fast pay attention to how it vibrates. OKEY, let me spin it. Let me give it a better way to spin this, this one’s pretty good. Está bem, i feel a little bit shake to it it pretty much like i could feel it like, the all the other ones. They wobbled really really bad and it was wobbling so i’m using this integrity. Uh well, balancer, is about like 40 Dólares, but this wheel is pretty much good on balance really good on the balance, Sim, é, even much much better than these rest of them. I did. I had weights right there, so what i did was i’m gon na put a small amount of weight on this, because i do feel a shake, but not as much but the other ones there was bouncing. I could feel the whole thing was just bouncing in my hand.
I should have had it i’m gon na go, get another tire and i’ll show you what balance that one instead of this one, OKEY, but i think i’m gon na just leave this one alone. Perfect. Sim, so let me go get one more tire. I got a bag here with felony tires i’m gon na rip this one open and we’re gon na put this that tire i got lucky. It was pretty much balanced but check this out. These are wider tires, so let’s take this one off that way. You can see how this mounts and this has to sit in the center right there then the felony tire goes onto the hub and then we put this little screw on the other end and everything just sits there make sure it’s, nice and tight, but let’s see How bad this one is definitely gon na be bad. Oh yeah see that it’s bouncing so now what we need to do is you can do two things you can stop it give it a small spin and wait until it stops. So once it stops. What happens? Is the heaviest part will end up in the bottom? That means the top part is lighter, so you will take a little bit of weight and put it on the top. So i already know i’m going to take about like a little bit of this and i’m going to cut that much out and that’s the piece i’m going to use it’s a double sided so i’m, going to remove that white uh piece of paper from this side.
Let’S wait until it stops okay and uh let’s, give it a moment it’s about to stop. So let me prepare this so it’s gon na keep doing that until it stops to the spot perfect spot all right, gon na wait on this. When that car is moving 100 milhas por hora, that tire is bouncing, so you will lose a little bit of retraction and uh. You don’t want that. You want everything to be perfect, so pretty much i’m going to put this in the inside okay on the back inside right there, okay and after that, all you do, is you spin it one more time and then you feel it a lot less. I still feel it, but a lot less so let’s let’s give it one more time, estamos gon na. Let this thing stop. So what i like to do is give it a small turn. So what i’m gon na do is i’m gon na take a small little piece and cut a small piece of sign, because i know it’s a lot less and i’m going to show you one more thing that you can do besides that a lot of people do It that way, but this is the way i like to do it – everyone prefers their own way. So let’s wait for this tire to stop and it’s going to indicate us where the weight goes bam. Nope, not stopping. Yet the camera turned off because i said the stop board, but other than that we’re good.
So right there that’s the spot that’s the spot. So i think this should be good but other than that a lot of people they like to do this. You do that. It should just stop immediately in the same spot. If you let it go there, you can do it. Three different ways see that it stops there and if you want to fix it up, what you could do is just let it drop to the spot and put a little bit of weight. If you want to make it perfect, perfect, so i’m going to get a little bit more weight and i’m going to put it in that little particular spot, and it should just stop exactly where i’m at okay other than that should be good, let’s spin it one More time, let’s go this way: Oh sim, no shake.