Construção de carros FPV RC de longo alcance | Câmera dentro do carro | (5.8 Ghz)
So we can look all around inside the tub Music, Música, Música, OKEY. So this is an overview of the fpv rc car it’s, based off a strada sc. First thing i want to point out is: i did crash it on the first test. I wasn’t filming either, but i did crash it and it destroyed the front of the body. I’Ll put a picture right now. These bodies aren’t that strong, so it just shattered. OKEY, let me show you inside and some of the features i’ve added all right. First thing: you’ll notice is this, which is a plate of a maverick scout it’s, a rockfall i used to own and i’ve combined it with this car to make a raised platform which has the fpv camera, and it also has a gopro which slots in here and Then i can turn this with a servo now the server for this is a sevox mini server and you can’t quite see it. Let me just take out the batteries. I did extend the battery mount using a body post, so i can fit the battery for the car, which is in the bottom it’s a 2s 6000 miliampa, and then this is the battery for the camera and transmitter, which is a 4s so that’s the battery. For the camera and vtx so that’s the servo in there i did modify the servo, so you can rotate 360 Graus. The receiver is over here vtx in here, currently set on 200 milliwatts.
This is the battery voltage checker, which plugs into the battery in the car. This one so there’s a fan under this cut a few holes for air to get in like the point of this cover, is to keep rain off it, because i want to be able to use this in the wet. This is the antenna i currently have on the car and yeah that connects in like that. Além disso, this is just temporarily because i was testing this in the night and yeah. It didn’t go that well that’s when i crashed it, and so this is connected to the camera, which is a plug which goes into the vtx, goes in there, and then this connects to the battery so ignoring the stuff i’ve added for fpv. The car itself is pretty much stock, except for the electrics and these drive shafts, which i got because the standard drive shafts, which i have in the back are dog bones on both ends. They are dog bones, so they can fall out, especially when you steer and if you hit this and you’re steering they can sometimes pop out and then you you lose front wheel, driving that’s, Não é bom, so these ones have a little joint here.