0 millimeter same thing you going to try to tighten it down, just keep turning keep turning, but either on your kit almost got It done almost got it done. You go to try to try to tighten the screw down and slip slip, slip slip slip, you driver is stripped or you hit the the head of the driver’s wore down and you ain’t got none on water, all the ones. You got. What you go, you can’t do number throw them away right. They ain’t no good. They stripped out wrong. You can fix them and get about a couple of more turns out of them. You know you can fix them i’m about to show you how to fix that. You see how i got my it’s, my 2 2.0 millimeter wrench allen. Wrench, you see how that tilt. Let me get it in focus. The tip is rounded see the tie. The tip of it come back soon. It’S rounded, at the end, now see how that tip. Well, the tip is round where a strip was really just worn out so i’m gon na fix that on this one. On my two point, 2.0, and on on the two five, you know what i’m saying i’m gon na show you a a a fix, a quick fix where you can still get your your stuff, tighten up on your car on your engine or whatever and um still Um use your your worn out ones until you can get some new ones ordered up.
You know in through through the mail or whatever so i’m gon na show you a trick how to you got ta, throw them away quiet yet, quite not quite yet. I’Ll show you how to fix that sorry, how to fix it i’m, trying to make sure y’all can see it. I don’t know what’s going to focus in on this phone, but it’s close, but anyway, i’m gon na show you how to fix that, when your tip is on worn out it’s time to replace the tip don’t, throw them away quite yet show you how to fix It one thing you need to do: Music Applause, if you’re doing rc, you got to have a dremel, get your drummer and get the sanding wheel. The drummer and the sanding wheels now to do this. You’Re gon na have to get some get them. Put some safety goggles on you have to have some safety goggles, because this is gon na spark. All i’m gon na do i’m gon na sand down the part of the tip that’s that’s, worn out, because you only using man on these drivers. We only use really down and screw we’re only using the very tip of the allen wrench anyway. So what i’m going to do? I’M, going to sand down the worn out part back to the good part i’m going to sand the warm part down i’m saying that down to the to the um to the good part of the of the allen head i’m doing it.
On my 2.0 millimeter and my two five so get some safety goggles, i got glasses on so i should be protected, but y’all get some eye protection to do this because it’s going to spark, like i said, i’m just going to sand down the part that’s just Worn out down to the part that is not being used, we got a, we got all this will fit, so you can use all this. Just don’t get mad when you can’t use the tilt that’s going down. So my sanding wheel, my dremel i’ll turn it on. Not the high speed but closest to it. You just drill down sand it down: Music down Music, Music, make sure it’s smooth, but just saying it all down to the good part: Music, Music you’re, trying to make it flat: Music, that’s, all i’m doing: Applause, Music, um. Okay, this 2.5 i’m about to do the 200. 2.0 millimeter Music kicks driver just gon na sand. It down again just staying off the worn out part down to the good part, Music, we’re gon na fan that down Music so make sure it’s flat and even make sure it’s flat and even on the top on the tip Music. Okay, Music. So now check this out 2.0. It was slipping at first now we put it in there. Look at that coming right on now, good as new good as new it’s a whole year over until you can get some new fresh tips.
So this will give you more time on the tips that you already have. You got ta, throw them away. Look this one’s in that good watch this it was slipping from this goal. Now watch see that dude it’s new see where this one was my buggy. I was trying to tighten down on my buggy screws. Y’All can y’all see it come round this way. Okay, y’all see right. There now see it ain’t slipping it’s in there grill good as new good as new, so yeah man good little trick tip to buy you time until you can get some fresh new tips. But this will last you a good while, like i say, we only use when our mips or if you just get a knock off brand cheap chinese brand like these are, but they were still real good with a good grip. It tip well down. You don’t have to throw them away. Just you get your drummer trim that little tip that, like i said we only using the we only using the very tip the tip of our tools, so just dream of the dream of the worn out part of the tip down just make sure it’s flat on It on the end, like that, and you good to go just like a brand new set of drivers, so yeah this ekj 24 000. Here again showing love to my family i’m, giving y’all all my secrets, man i’m, giving you all my secrets.
Y’All know that don’t you it’s gon na be two in one week, but i owe y’all because i missed the ttr team tip two so i’m, giving y’all the ttr team tips in the vault tips, these secrets they they in the vault. You know i ain’t supposed to be telling this stuff, but i’m gon na tell it to my family. So, like i say, everybody ain’t got money just to spin out 40 dollars for new tips. You know what i’m saying for new drivers: 50 new drivers. You know to do a couple of to use. You know every so often so i’m giving y’all some game here, keep a little money in your pocket and just to maximize the stuff that we have. You know so, but yeah ekj, this, your ttr out the vault team tip secret number two of the week. I owe y’all one because i miss tuesday, so i gave y’all one about the um shocks and i give y’all a most valuable one. Another valuable one about you now you can use your tip your allen tips, but i haven’t go to the stove or order wait two three days just for you to tighten up a boat on your on your engine or a screw on your on your kit or Whatever so yeah ekj 24 000 treat people the way you want to be treated, they don’t haters, be your motivators. Action speak louder than words left. Ta salute, left, tie up, left top salute.