What we got so comes with a model has a 30 day warranty on it and just uh. Thank you for our purchase through uh rc motion rc. It comes in a well packaged box and you can see it’s the 64 millimeter edf, jet rafter, so we’re gon na go ahead and let’s put this down over on the side and let’s. Take a look on the inside yeah, this jet i’m, going to go ahead and put a uh zohd co pilot mini uh or light in this. So if i’ve watched a couple of youtube videos, i have not seen anybody add it to this. It could be because of the space that um that’s one of the things. I want to make sure that i can add this. I don’t know how the fuselage is so i’ve got to find out if the future launch is going to get me the space. I need to add that in there, so this is the part that’s kind of a little challenging to pick apart, sometimes so let’s try to do it. This way, în regulă, let’s put this off to the side. This is the actual packaging. It’S got some really good foam to keep it firm um. This is ppo foam it’s even got a little pilot in there. Let’S go ahead and cut these foam things out here, i’m going to say they package, it very well let’s see if we can get the fuselage out.
This is the fuselage which you can see it’s a pretty nice size fuselage. You can see the little pilot there in the front and i was thinking of putting a fpv camera. Probably one of those swift run cam in there uh, so i can get some fpv bottom of the of the fuselage. acest, i believe in this compartment here, has the esc and also you’ll, find that i don’t know if you can actually see where the edf motor uh it’s a 12 blade on this high performance, one versus a five blade and let’s look at the compartment here. This model does come with the esc. The edf motor it’s got it. The pre installed, servos you’re going to have and ailerons and an elevator doesn’t have a rudder. It can be added, they’re pre installed. We got one servo here, one servo here, and this is the front wheel. Itis, it has a servo. This is the one you hook uh rudder, and this will control the turning of the wheel. These are pretty good rubber, Roţi, they’re, nice and large. So my idea of adding the the zhd co pilot, i would probably would have to cut out a section over on this side. Let’S put this down – probably maybe in here maybe i’ll, cut out an opening. I can put it in there and then i’ll run my server wires to it, because on the z80, what needs to be done is you have to locate on the aircraft in the area where it’s the the cg is as close as possible to where you’re gon Na mount the flight controller, i think that’s, probably a really good area to support, and i might have it where i can just pop in the phone.
I just got ta set it up. So when it’s ready to stall, i can have it all set up, because obviously it’s got a little control board. The zohd does not need a computer plugged in to program the uh controller, so um it’s, a nice plane let’s go ahead and look at the other things in there. You got your manual, which i downloaded and kind of read on it online. ok. So here we have okay, so we have our rear stabilizer as you notice, Um. ok, îmi pare rău, these are actually the wings. I was just saying: whoa they they threw in the rudder but it’s. Not these are actually the actual wings itself here’s one and this one they didn’t actually wrap in plastic. They just put basically a foam piece in between them, as you notice here, so these have their pre installed service. I don’t think these are metal gears. These are probably plastic gears and it looks like they’re very easy to get out and you got your hinges. You got plastic hinges in here, really good support, so they have three of them in place here: it’s nice, both on this and here’s our stabilizer right here. So anyways i’m gon na leave them in the bag for now, because i’m gon na assemble it not tonight another day, but these are stabilizer. These are the ones that you can. Actually probably you can score these and add some servos. If you want to have a rudder on these and i’ve seen people, do it, give you a little bit more sharper cleaner, turns, ok, Um.
These are our elevators, which attach they have an extension link that attaches to these for your elevators, which actually would go like this. This would give it the the uplift vertical lift when these are. They show in the manual that these have to be between six to seven millimeters uh in between the the frame or the fuselage area, there’s a measurement for a lift. So this way, when it’s running down a runway, it lifts up enough that it can take off without having too much of a long run, to take off uh you can see. This is the server wall. Uh links right here comes with that. These are the wheels. These are pretty big wheels that actually will roll so um. They actually are nice rubber wheels all right that’s about it. Bine, youtubers, what i’m gon na do is i’m gon na put you on pause and i’m gon na show you my flight controller i’ll be right: ok, we’re back! This is what’s going in this f 22 raptor 64 millimeter ef edf motor this flight controller. Here is it keeps it stable, but you can also have return to home. This plane is fairly fast and what happens, and maybe when it goes into a vertical rise and if you’re going to perform some acrobatics, you can with this plane, but you also, if you lose control of it, you can just hit the return to home and basically It’Ll stabilize itself, so you can use it and i’ll find out how well it is with using this particular flight controller.
I have added it to my other planes and it works fantastic, so anyways tune in youtubers for the updated um build of the f22 raptor 64 milimetru. The 4s model, with the zed hd uh flight controller, uh este, going to be very interesting to install and then we’ll do some mods. As we start experimenting with this aircraft. Youtubers have a great evening or day wherever time of the day. You are a part of the world just tune in subscribe, thanks for watching and uh stay tuned for the completion and the flight maiden on this particular aircraft.