7.. If you’re new to the channel, please consider subscribing there’s heaps of cool stuff. I think just like this will be now here we have a mass of parts. Now all these are available check out the link below they are from sterling kit. Now what you see here is everything you need pretty much to get these little toyan four stroke motors going now. Da, this is my next build. I’Ve done several builds i’ve done a rat rod. I’Ve done a truck. I’Ve also done the crawler, which just has the exact same motor as this it’s, an fs l, 200, two cylinder four stroke nitro motor. Now these are really cool um. They do take a lot of tinkering a lot of parts, obviously, după puteți vedea, to get it going. So what i’ll do i’ll show you what i have, and maybe what i’m going to put it in next so first up here is the fsl 200.. Really cool it’s, one of their latest motors, two cylinder, four stroke, really cool little motor. They perform really good and um. I don’t know, and they sound awesome too, when you put a little exhaust on them, which i have here as well. I straight piped my uh defender it’s, damn loud, but i will definitely try these silences. So first up you do get instruction manual, some lubrication for the cams and the motor itself. Now you can’t just jump into these plug it up and ready to go.
You need to clutch all that kind of stuff, and that is what i will show you now, but there is the uh fsl 200 doesn’t look cool little red accents anodized with the black. I think it looks fantastic, so two cylinder air cooled, and that is all you need. The fan is all you need to keep it cool. Get uh asked that a lot of times and that’s. You know it works well keeps it in operating temperature. So two carburetors, obviously cool you got ta, attach a clutch and all that kind of cool stuff at the back, but uh we’ll do that in another video don’t worry about that. If it’s a little bit unlined you just line it up, that’s it now next up, they release this new four speed transmission, so three speeds forward and one reverse. So i thought you know what i’m going to try this out. I think it looks pretty damn cool. They also included springs in the kit as well. I know dennis uh i’ll check i’ll leave the link down below. If you think i do cool stuff, like cool conversions check out uh dennis he does much better than me. He has this already and he’s utilizing in the car, but it does come with springs as well, and that is to kind of keep these key forks in the center. So you’ve got one here, so you got that’s. I believe that’s three uh year, three and that’s reverse on the other side.
Here you have first, second, third and fourth now to make it all run correctly. I do believe these need to be in the middle, so it’s in neutral, but uh i’ll figure this out in another video, but the benefit of this all like stainless steel, metal construction, and it does also have a break here at the back. So really cool i’ll. Try to make that work if i don’t make that work. I’Ll definitely be using a revo 3.3 two speed forward and reverse transmission, because it does have a break as well so that’s that now, because the engine has a brushes starter mode, you need a esc. To start that, so we have different options here now this one here which uh so basically, i believe they’re 30 pentru a 40 amp esc it’s got a push button there to start it. This goes to your glow, plug you go to ground and which is just there goes the side of the motor, și că este, you use a lipo battery to start it. This is just a glow igniter, they are pretty big and i do hope they will change these in the near future to make them smaller, but that is a glow igniter to keep. You know because it’s got two: you need two of these with a single cylinder. Evident, just need one, but with this you need two of these, so two glide plugs. You also have this setup, which is pretty much the same, just kind of a different configuration, but you can see very similar.
It’S got a little starter system there and you start it once it started, it’s all good to go. You can disconnect the batteries once the glows are ignited, but i’ve just left them going and i’ve had no real issues. Uh so far need a fuel tank and all the associated fuel, tubing and stuff like that to go with it now, you know you might have that in your collection already, but obviously you do need to get all this so that’s a necessity. You do need a fuel tank now i saw these. These look pretty damn cool now these are mufflers and silencers as well. Now you can get dual stage. You can put another one on the end of this to quiet it down even more, but this is just a single stage muffler, but it does have like uh matting material inside it now it’s quite hard to see, but is actually like a normal muffler for a Car, so that would be cool to see now i have two of these because i’m, not too sure what i’m going to be doing. If i run this setup or you have this setup as well, these are exhausts as well. I think they look pretty damn cool. Nwo, with these, you don’t need to run the whole copper pipe. You can just run plastic tubing from the manifold straight to the exhaust, so it’s much easier to manipulate the shape of the car and get it out to the back or whatever you want to do with it now these are exhausts as well, pretty damn cool little Piece shooters much smaller than these, but these look quite large, maybe not to scale depending on what you want to do with them, but i think they will look cool so we have these as well.
So that is something to keep in mind. Otherwise, on my crawler build, i just did straight uh like brass tubing. I believe so. You need an exhaust air filter. You don’t want to get any debris in that motor i’m guilty of running them without these, but because they fall off sometimes so that’s something i’m. More conscious of in the future, this is like a t way for the fuel to go in because it is dual carburetor you need, ştii, to go either way and then one inlet or you know to the to the fuel tank two glide plugs. Evident – and these are type f – and these are for four stroke motives and very importantly, you need a clutch so i’m, not too sure how many teeth. This is maybe 16 Dinte, but you need a clutch. Is it generic style, aluminium, clutch shoes? You’Ve got a bit of thread lucky. This is a whole pack. It includes like a flywheel but you’re not going to be using this um. It has a clutch nut screws and also your ball bearings as well. You can also get different sizes, just like the or you can just buy the clutch belt separately as well, such as a clutch nut here. So pretty cool and there are a lot of parts, but the fun of this hobby is making this all work and i’ve done that pretty successfully with my builds. So what am i going to be? Putting all this into well here is a cen f, 450 custom truck it’s, a 1 10 scale and normally it’s too small, but this thing is mammoth it’s, huge, este, really long and heaps of room.
I believe to put all this stuff in now that’s the problem with all this you need like in a couple batteries, you need servos three to four servos and especially with this transmission, i do believe you need two servos alone to run it, so you need obviously One to keep it in neutral and then one to change it from third to new to reverse, or vice versa, deci asta e, two servos alone, then you need a steering servo throttle and brake servo, so it gets up there. So i thought maybe this might be good candidate and, if not, let me know – or if you have any other ideas, let me know so you can see how much room we have now we’ve already done a video. I actually replaced it with a quick run. Fusion setup now this is sick but as you can see, there’s a lot of room here, so obviously the motor is going to go here in between these uh braces here. So you got the motor it’s going to go there, a gear box roughly there or this way and as you can see, it looks pretty damn long, because this car is a jewelry and a pickup. So it’s got a lot of room at the back, but it’s got a kind of a cool little setup here now, Sunt., not too sure i might be able to make this work i i just might be able to, and i think it will be cool having This in this so uh, i think it might be.
I might try i’m, not too sure. What do you guys think any other options now do also have another land rover. I can put that in, but that’s already been done. If you have been living on the rock and watching my channel, this is my land rover, după puteți vedea, that’s a toy as well: fsl 200. There is the transmission, and these work really really well forward, drive two speed forward and reverse and, după puteți vedea, it’s a lot now when you consider this it’s skinnier, but i might be able to make it work i’m, not too sure otherwise, am spus, I’Ve got another one of these as well, that might be able to kind of fit everything in there, dar uh da. Look at these check out these, while i’m here see i’ve done just a normal tube, exhausted straight pipe. You can put these down the bottom as well. That’Ll, look pretty damn cool, much quieter as well, because this is really loud but uh yeah, i don’t know. What do you guys think give me some options? I think it would be pretty cool in this. Maybe like a tower trailer or something behind it, like a scale boat i’m, not too sure, because these motors they they’ve pretty much only been in crawlers and the issue with that is it’s because of the chassis. You need like a scale, chassis and uh and that’s. Why crawlers are good because they’ve got the chassis rails? It? Oh sorry, i digress.
You can’t put this in anything like any nitro rc or like any existing one with a flat normal style chassis. But that looks boring because i’d, like these under the bonnet to look scared. I wanted to have them halfway in the chassis like a normal like on road car just looks silly in my opinion. You want them to look scared, there’s a whole point of these that’s. Why these crawlers work because we’ve got the chassis rails? You can see them in between the chassis rails. You know on either side of the suspension, so i’ve been thinking. I would like to get a road car, even or of like a rally, one that small scale, but you need. You know like a arms on the off the side, just like a real car, not having a massive flat part. Then you’ve got this huge section here for the steering mechanism that’s why it gets pretty difficult but that’s why we use these. So all you need to do with these normally is kind of re. You know relocate the servo somewhere up the front out of the way and uh. You know we just make it work on the side, whatever all this goes obviously for your transmission and break, but you can definitely make it work, so these do take time. Believe me that they’re not a sort of walk in the park, you have to kind of sit scratch. Your head lose a bit of hair, i don’t have any anymore, but uh.
He definitely can make him work. If you really want to, am spus, dennis, has done heaps of cool stuff i’ll leave the link for his channel. Please go check it out. Tell him steve, sent ya, because you know he does. He does leave school stuff and he does it kind of professionally. Not like uh, i don’t think like not like me, but uh. Please guys give me some suggestions down below what do you think i should put this in i’m thinking the scent at 450, but uh yeah it’s just got to think of options with it has chassis rails on the side and it’s quite large, because you know it Do gets pretty big and plus, once you get all the the piping the batteries, it takes a lot of room and i was wanted to put it in the fs um jeep, but uh it’s, not enough room once you close it all down. So all right guys.