I had some kind of a package here from one of the things i bought in the shop and i cut out something like this. The package was of a different shape, but it was perfect for my receiver, so i’ll put it here and put some silicone inside then i will wait until the silicone becomes solid. I will be using a regular silicone which is used in kitchens and bathrooms: Музыка. Музыка. Музыка, Музыка, Музыка. I mount the cables this way so that they look in the same direction so that it can be then easier to connect them to the electrical motors Music. Музыка. So i’ll apply silicone here as well, and we also have some bare contacts. Unprotected contacts on the electrical motor and i think to cover those contacts so that, if they get into water, then they don’t get short Music. Now the silicone has become solid and i can get rid of unnecessary plastic on it. The plastic container that i have used looks to be perfect to fit into the car, so i will keep it i’ll just cut out the excessive plastic and see where i can put this inside of the car Music, and now we are ready to put everything together. So i looked at the chassis and decided to put the transmitter this way. I had to fine tune a little bit the shape of the silicone so that it fits perfectly well inside, and then i will use griddles to put it all together.
Музыка, Музыка, Music also important, not to forget to close this hole with the tape so that the sand and debris doesn’t go inside there’s the same hole in the bottom. I never close that because you need that to drain water out, because if you close all holes, the water may stay inside and destroy your electrical motor, but in general the car is ready for testing. Now we have much more space between the bottom and transmitter which will get frozen when it would get into water. Now i will avoid this by protecting it with silicone and putting it higher inside of the chassis. Также, i raised a little bit my new shock absorbers. They are adjustable. You can turn this, make it high a little lower and change the resistance of the springs and, как вы можете видеть, you can easily turn it on and turn it off when you have the cover on the chassis, so there’s no problem with accessing the button Music. Like turn it on easily pushing the button here, Музыка – and you can see the light blinking inside – i can see it. So it kind of looks cool, and now i synchronize it and we’re ready to go. Everything works. The adjustment button also works for the front wheels.