You’Ve all had that tire that just ballooned way too much and then eventually exploded and that’s. What i’m really trying to counter in this video? Because that’s happened to me a lot and when i say a lot i mean it. So this is what a finished tire looks like. It has two belts around the outside and it actually looks alright, but this is what it normally looks like on this side. This is what the belted side looks like, so i have to confess these tires actually are already belted, but they’re only ready for 5000 rpm on the belt i’m doing this, because when it dips out, it will make the wheel with less traction, expand and balloon to. Основном, twice the size it does at full rpm and i don’t want them to exceed 5000 rpm then damage the internal belt and then eventually blow up so i’m just going to belt them on the outside and for this i’m using 80 pound fishing line from bass. Pro shops, if you want to look at that, get the part number or whatever. So this rated for 80 Фунтов, это 164 yards of it and the breaking pound is a hundred hundred pounds to break it. It can consistently take eighty pounds, but it will break at a hundred. I don’t think these things actually have the power of a hundred pounds to break this fishing line. That would be pretty extreme, so let’s just keep going and i’ll show you how to do this.
Сооо, Прежде всего, you just want to take a decent amount of fishing line and not cut it yet just leave it out and to tack it down i’m, just going to use some gorilla glue, То есть. What you see all these little white things on the sides are let’s, get really glue. You just want to take it and see there here’s the other side of the belt, so you want to flip it around and get the opposite side. So you’re not going over a bump every time. Основном, you don’t want this giant bump on one side and there’s nothing to counter on the other side, so you’re going to want to make the knot opposite of this one you’re going to take your fishing line tack. It down here with your finger and pull you’re going to want to find somewhere that’s kind of in the middle of two things like see this. This is in the middle of these two treads right here, so it won’t really come. Undone that’s, really the key to having a strong, strong belt so i’m just going to wrap it around twice. Just because i don’t need too much wrap, but you want to make sure it’s tight before you do this Music. Хорошо, now that you’ve got it back to your thing, you just want to cut the fishing line, get it out of the way and then you want to make a knot, but you can’t double knot it yet because you can’t hold it down you’re going to want To make sure it’s tight, Очевидно, but you also want to make sure that you don’t loose, so just a normal knot will do actually just like a tie in your shoes.
Not i don’t know how you tie your shoes, but i tie my shoes normally so see how this side right here is coming away from the inside one. You want to make sure they’re together, because then they might eventually loosen out and tighten see how this one’s up here, you you want to make sure it’s in there you have to. Then you just wrap it around. Your fingers tie that down and if i try to double knot it this original knot, which is actually holding the fishing line down, will come away a little bit and make this not as tight as it should be. So i have my dad to help me i’m. Just gon na tie hold this really tight. Have him put a little dab of super glue on it at the knot? И тогда, when that glue dries, i can double knot it and then finish it off to the right to the right. You didn’t get it on it all right, То есть, Хорошо! Хорошо! Спасибо! So now that you got the glue on you just want to tighten it up, hold it down around the outside of the tire and then just lift off and let it dry and then once it’s dried, you come back to it and you can knot it up Again, so on the fishing line, you want to make sure that it is braided. You definitely want to make sure it’s. Braided nylon is also okay, Слишком, but if you’re going to get string, fishing line make sure it’s braided, because that is really what you want, because it’s very strong.
So what you really want is the abrasion resistance that has five stars. I guess most fishing, i don’t fish, but i guess most fishing boxes have some kind of rating like this, and this has lots of abrasion resistance. You want that and you also want not strength. Uh you’re not going to be casting it. So no one cares smoothness. You don’t really care about it being too smooth, because if it’s too smooth you’ll lose grip, i mean on your tire. You will actually lose grip, so you don’t want it to be too smooth, i guess, but in actual fishing you do because you want to glide through the water braided lots of knot, strength and lots of abrasion resistance, the higher the poundage the better, because it can Take more of a balloon if you don’t have a belted tire already like this proline badland, you want a really high pound rating on your fishing line, because it’s not it’s has to hold back a lot of force. 80 is good and 100 То есть 100 is pretty. Extreme 80 is good. 50 Кому 80, i would say, is pretty good so now that you’re dried a little bit it doesn’t have to be too dry honestly, you can start tying little knots. I tie four knots on top of this knot. Just normal knots, i don’t know if you know i’m, not a stronger, Вы можете сделать это, but i just like the normal shoelace knot.
It works perfect and you see where i made my knot. I made my knot on a ridge like a bump. You don’t want to make it on a dip like there. You want to make on a bump kind of where i did so you’re not hitting the line eventually knocking it loose. So that was one knot and i like to use this clamp grab. It really tight and just use my finger for the other one. Oh good. As i said four knots above the original knot that you glued. So now you got your scissors and you want to get it a little bit above the knot so where it’s not going to cut the knot and it’s not going to be too short, so it might eventually go away. Now you got your excess string off you’re, going to get your glue and put a little bit underneath the knot. You want to tack your knot down underneath and put basically cake and glue and then take this right here and glue because it kind of surrounds them. Not there we go and then on each of these one little ridge, you’re going to take some glue, put it on, take some glue, put it on and continue all the way around the tire until you’re back at your knot, and now it looks like the test Domain that i showed you earlier and it actually looks all right except the giant white spots that it will make so it’s, not the prettiest, but it still looks pretty good and i would recommend getting a dark fishing line because i mean all basically all tires.
Are black and it’ll kind of blend in basically, no one will know it’s there and it’ll look pretty good. So when you want to let it dry, you want to leave it dry and like this, the glue can seep down into where it hits the rest of the tire, and it goes down like this. You don’t want to do this because then the glue will start dropping away from where it glues onto the tire. So just whichever way, you’re actually gluing it on you want it to. You want the glue to seep in to where it’ll hit the tire and dry. Вроде того, so hopefully this works i’m pretty sure it will. Это 80 pound fishing line. I don’t think it’s gon na break just because a belted tire balloons, a tiny, tiny, tiny bit. I think it’ll totally hold it and i can only see it slipping off if it compresses a lot, but i mean this is a bash here: it’s not exactly going to compress too much, and this is actually pretty hard to compress, prolonged badlands. They look really nice too. Like those look, Классно, looks awesome. These are the badlands v2. I think it has a different rim. If anyone knows what that yellow dot is, please tell me, i have no idea what that means. The reason i glued them all around is because i mean eventually it keeps them in place and also, as i mentioned it, squishes and compresses, and that could lead the fishing line around one of the knots and come off so guys hope this helped.
You hope this works.