On the other side there i just thought i would show you a quick video just now about the back end, all that stuff. So obviously people watch the channel know i’ve got must be around about the 30 marquee rc car, something around that i’m, not actually counting them all that’s. How bad it is. My addiction that’s, pretty bad it’s struggled real but um. Basically, i want to show you a couple of projects: i’ve got and things i’ve got going on just now. So if you wanted to see videos of them all or any of them doing what i’m going to do i’m happy to make the videos, but only if these guys are interested because if not, it does take a bit of time. Filming working on cars showing bits. Try to get your camera position, so everybody can see. So if not a lot of people are wanting to see that aside, there i’ll completely miss out doing that kind of stuff on camera. But i’ll just go through a couple of things: i’m working on just now and show these guys what they are and what kind of plans i’ve got see if these have got any ideas to add in for me as well see what you guys think so. I’Ll move on just now, i’ll show you the first thing that i’ve got going on there’s a few projects. I think there’s um four just now at the one time so it’s a bit it’s a bit crazy.
So i apologize for the mess in advance of what you’re going to see here we go. Firstly, an old, big, papa, paul rc video would be complete without a beer in the workshop. This is priority 80, getting your head straight for what you’re going to do in any excuse for a beer on a hot day, i’m going to take it all right. Moving on all right. First i’ve got the kyoto phaser hellcat nk2, which, as you know, it’s a 10 scale, brushed car, my favorite little car yet sort of class. I love this thing and i’ve said it in many videos. I run this car a lot off camera it’s kind of my go to car just to play around myself. I just really really enjoy it and the reason i got it was my message when i’m wet on holiday florida hellcat has always been one of my favorite cars, so i got a dodge challenger when i was over on holiday and i came back, this is a Present so it’s kind of a bit sentimental too. So i like to look after this car and but the last time i had it out. I think it was a wet day and my bad, i didn’t actually dry it off. So when i went to take it out again, it was running fine, but um all the bearings and that felt a bit rough, a bit gray. So, although it doesn’t look overly clean, i’ve still got to polish out and things i’ve replaced all the wheel, bearings there’s.
Two in each side, they’ve been replaced and i’ve done, the diff bearings front and back and um basically stripped everything out so i’m. Sorry just now, but we can see how free it’s running so there’s a spar. My finger everything’s absolutely flying around. So the reason why this little bit of tape on here just now is i’ve, actually not threaded the screw in tight. Yet it was just to remind myself that i’ve got to tighten that so basically the motor as well, i would say it’s a little rough and a little tight, so i’m, going to replace that and i’ve got a stuff like i’ve done on my advantage. I could actually put the metal spar, i could put the metal shaft and things, and can you do it up and make it a lot faster, but i like the car, exactly how it is so i can’t keep this one standard and then it’s just a casey Stripping it down tidying up, so i’ve got a little bit more to do, maybe about an hour and a half’s work and we’ll get this one back together, and obviously the body which is in great condition just needs a little cleanup too. So this one is pretty much nothing to do other than a little bit of tidying up and maintenance. Moving on we’ve got the nut sack here and this car i don’t like swearing on the channel, but this thing’s really pissing me off honestly.
I wish i never bought it when it runs so much fun, but i’ve had to rebuild this for the ground up, probably eight to ten times and it’s just consistently getting the same problems. So i’ve got the body off just now: um back death’s, absolutely fine! That’S! All been redone it’s got a new center death, um and it’s a new front diff too. But what seems to be happening is all the time you put a new front diff in here, and it just chews up at the sort of spiral gear. It turns turns inside gear, but the bearings this time seem to be okay, but it must be something to do with a diff case, so i could go and get a normal one ordered up and get a new diff case. But i see that evon they’ve brought out some new parts for this car. Finally, so i’m probably going to get a front and a back diff case on that. But the problem is that about, i think, about 80 to 100 pound each so i’m, not really in any big hurry to do this. This will be like in the last car on my list i’m, just kind of slowly going to put it back together enough. Just now that i don’t lose any parts and then this is going to be shelf for a little while as frustrating as that is because i do like making videos where it looks good on this drive on.
But the problem is it’s a laser nut and it’s a piece of and the amount of times you actually get driving it’s, just not enough when you look at it, it’s beautiful but it’s, pretty useless so yeah as i’ve said in the channel many times. Listening to me, don’t be stupid, don’t buy one because i do think unless you’re seriously lucky you’re going to regret that car biggest regret in my collection, that’s for sure right. Next car we’ve got the habeel hyper gt, which has got nothing wrong with it. But i’ve been kind of robbing any bits here and there for other cars, because i don’t see the point of having keeping buying esc’s and motors for every car. I’Ve got because i run my cell and i mean if i’ve got any esc’s. I can’t run 10 cars at one time, so i kind of rob that’s user car for a bit and put them back in so this doesn’t really need any work done yet um, it might look like it. Just goes got the wheels off, but the gyro and servos in there um needs a motor and an esc stuck in it. So i’ve got a armor system there, so there’s the motor i’ve got a 185 blx system. I think i’ve got one in here. I’Ve actually got i’ve actually got two in the drawer and that’s the um maxi that i had to burn out, but i had a lot of use of that so i’m not going to be too hard on the maxi um.
I might stick the 185 system in this, but at the same time, what i’m thinking about is the car’s pretty insane on success and i’m only going to convert it to a rally build at some point soon. So what i might do, since i’m, not going to be using this laser or not for a little while is i might take the 4s system and motor out this and stick it in the hyper gt for a little while change the tires get some kind of Rally spec tires and maybe like rolling avengers or something is a bit road pattern, but the hoons are just a bit too soft for rally, and this is an old set that i had that i was just kidding butchering and driving about, but you can see it Looks like enough to adjust the cambers on the car, because they’ve been wearing away at a funny angle, so and yeah that’s being put back together and the other thing that i’m doing just now, which is um i’m, quite excited about the first one. What i’m actually going to really properly enjoy doing as maradek sex, which looks an absolute mess just now, there’s nothing wrong with the motors there and everything, and i just took it to pieces because i’ve been running a lot of sand and mud gravel everywhere. So you can see it’s had like stones and things being grinded a bit underneath the center death, bearings and everything feel fine.
But i want to take them all out and check them all. Get this all cleaned out and what i’m thinking about doing is putting a mac six in this and maybe converting it to a road. Sorry car put hoons back on it, and can you run it on the road for a little while and that’s a good thing? With this car i mean it’s, my favorite all rounder i’ve said that in a lot of videos, great car, low center of gravity – so you can use it on the road pretty good, too um yeah that’s, just a little bit of work done. So i could do a video on that see me with doing all this stuff as i do it, but so that’s don’t use guys. If you want to see the video or to see the end result, but also with this car i’m going to have to get a new body, because you can see again if you’re off road and a couple of crashes here and there it’s split. This is probably the only negative i had with her addict sex, as you tend to find that the body shells may be a bit on the thin side, especially compared to the xtr lexan it’s, quite thin, so i’m going to get this replaced and do a custom Paint job just get a clear one, and i really want clear windows on it. I don’t know why but um that’s a big deal to me.
So this car i’m, just really going to pimp up get kind of like show piece, looking run it on the road and if i take it back off road again, all well, but we’ll just see how it goes, but yeah it’s a car. I really want to look after as well on a different note as well. We’Re doing all this work and my dad actually got a mess, which is ideal, so i don’t know if these guys have got something like this, but makes this so much easier is before i show little magnetic balls and things. I leave all my bits lying everywhere, but having this little shelfing rack in my workshop, i just know where everything is. I can get to everything so easy, so quick and it’s making my life a lot easier doing all these things so i’m, getting a bit more proactive with doing work on the cars just purely because i’m, not raking about trying to find things. I’Ve got most of my drawers all organized and then see. I need to kind of a controller clear out, because i’ve got all of these on my fly sky now and then yeah it’s, getting a bit a bit. Wild i’ve really got too much stuff in here. It’S getting overly crammed up i’m, not even going to show you guys the other side, because it’s pretty embarrassing till i get tidied up and on only the cronus xtr i’ll just get that just now.
Yeah that’s this monster since i’ve done the pivot balls on it. It’S just been insane i’m really really starting to fall in love with big time, so i’ve got the shell. Obviously it came with two shells and i’m just getting this now, so i don’t know what these guys are thinking. So i want to keep this old shell, which are still in good condition. We’Ll keep that for bastion that this new, clear shell, while i just keep this sort of showpiece or grass running and not doing anything too insane, so i don’t know i’m still not sure what colors to do so. I don’t, if you guys, got any ideas. What you think would be a good color match for the car. Let me know, because i’d be interested in some feedback. You know what you think for a shell that i should do on this car, so i’m kind of still still looking at ideas here that i have today. The reason i’ve not done it yet is i’m, just really not sure what i want to do now, anyway. We’Ll just take this shell off just now, and i’ll just show you he’s inside this car. This really just needs a little clean off with wipes and stuff, and we air dust down, but the car’s been going absolutely great and i think it was kind of is it pear or berg. I can’t say his name. So if he’s watching, i apologize what’s up about my video, he thought that the wheel sort of tool was off on the car, so he thought maybe the acre man had went on the car, which is absolutely fine.
I think it’s, my bad it’s, just a little rod end that i’ve put on there so um. In fact, that’s not the raw day they put on that’s the stock rod. End that’s, actually just slipped a little bit. So i need to adjust this to get the wheel wheel, toe a bit better and you can see i’ve got the one that snapped initially i’ve got an armor one on so i might just put an armor one on this other side, also but yeah. This car’s going great that 35 kilogram servo huge difference and the 2200 kv hobby wing motor and the torx esc it’s, just the ultimate combo, so yeah, absolutely loving this car yeah. So that’s it guys just basically, and if you do what you see me doing, this kind of stuff fixing these cars on videos. Let me know, if not can wait till i put another video out here, sorry acting outside or the track build whatever you want to see, but um yeah. I just thought it’s all good and well showing all the fun things that you do jumps bashing, but just get a bit insight to the stuff that we’ve got going on here and all the other different problems and ideas and just different things. You want to do with the cars workshop wise. I thought it’d be a good video just to show you so if you’re interested in that – and let me know please like and subscribe to the video if you’ve not already and um yeah i’ll see you soon hope.
These are all having a great time looking after your own stuff and then yeah. I look forward to watching your videos as well.