This is just going to be a small update, video i got the i had had some questions from you guys about my c24 setup. So this is my wplc. 24 1 custom paint tamiya ps17 3d printed rims. With these dark tires, not the best finish on here, but they look alright running it with a okay it’s hard to see in there, but it’s one of those um tiny es, cheap ones for under like 10 bucks, i will leave a link below works. Okay, i think i’m going to put in a d3 in here. I really like those from wpl. They are really nice okay, so this is the uh on the carriage i got. The wpl um km upgrade axles front and back front and rear. Sorry um, wpl 370 motor gearbox had to bend the link there a little bit, so it moves freely around the motor since it’s quite big. So i just put this in like yesterday, so i haven’t had the time to test it out. Really. This is just a test assembly, some more stuff left to do to really up make the fit optimal. You can see here it’s a little bent. I need to raise the flatbed a little bit here since the 370 motor rubs against the bottom of the body, but otherwise it works. Just fine really happy with this great performance, with such small amount of money so yeah this that’s, my c24 1 setup, the transmitter.
I use for it one of those cheap ones from banggood. It works nothing special and here we go. This is my c 54 body. Look at that huh looks pretty cool um it’s sitting on a c24 chassis with metal upgrades a two speed, wpl gearbox permanently in low gear; okay, so i haven’t glued the tires yet that’s why it looks like that in the rear here. So these these are the new v4 rims and tires wheels super grippy. I haven’t tried this outdoors yet, but they feel really really good Music i’m running it without the foams. It got a little bit too stiff for me with the included thumbs in there, but i’m. Really happy with the body this is uh. The tamiya ps16 paint, i think it looks pretty cool on here – might do some more detailing later, but i’m pretty happy with the way it looks right now. I really like all the details that they included in this party. This is such a cool body for such a small amount of money. I wpl is really becoming a brand. You can count on, they are pretty cool, so this is the setup i’m running here i got the v3. You esc in there with the sound kit works. Incredibly well super powerful with the two speed Music i’ve got a winch laying around as well. I haven’t had the time to fit it in there just yet but i’m going to fit.
The winch in here comes out from this little hole here and here’s. The v3 transmitter, which i really like, is perfect for when you’re making youtube videos, since you can operate it with one hand really easily and the v3, this is really good actually for these types of miniature crawlers lots of power, lots of throttle, control and it’s it’s Hard to beat for the price i mean it’s, like 30 bucks or something for the main board with the speaker and the transmitter. That’S super cheap i’ll leave a link down below make sure to check that out. It’S i bought all the stuff on this one from Music, except for the metal upgrades it’s from the official wpl store, which i prefer over banggood, since the packages always arrive pretty quickly and undamaged, which is the most important part i haven’t glued this on yet here I mean this looks: super cool and the amount of space they’ve, given you in this new body compared to the other models, it’s great it’s, so easy to fit everything in there now so i’m really really happy with it. You can fit a 1500 milliamp to cell without, but this is a 1300 milliamp. Sorry without any problems in there. I can show you here just turn this on see everything tucks away super easily in here, even though i haven’t really done much to tidy everything up, but it’s super easy, just kind of check out the sound system here, combined that’s, pretty cool, i like the lights In there as well so this i can really recommend this party it’s.
So cool and you’ve got the v3 electronics here as well it’s i mean look at that: throttle control, controller Music, so much power. I i’m really happy with this it’s going to be so much fun to take it out and try it out on the trails. It’S been raining a lot here lately, so i haven’t had a chance to do it, but i will try as soon as i can. I just want to get a little update. Video out to you guys show off. My latest builds here pretty happy with the paint on this, not my best paint job, but it looks alright. Another project that i’m working on right now is this wl toys, which is turning into a crawler. I mean the flex on. This is pretty insane stuck. You can look no problem like it’s insane, so i thought i would make a crawler out of this. I ordered some new stuff for it: new servo esc transmitter receiver, motor high torque motor optimized for crawling, as well as the easy optimized for crawling. I went with a hobby when one, so i think this can be become a really nice crawler actually. So this is pretty exciting since it’s not much of much of a basher. So i thought why not try it so yeah. That would be a lot of fun i’m, going to be more videos with that as well. So yeah that’s about it for this video uh leave a comment down below.
Let me guys, let me know what you guys think about my stuff here. What are the what i’m doing and uh let’s check out the steering here as well? I need some work in that direction, but pretty damn good in that direction got the plastic hubs here. Grinded them a little bit to make some more so that it works. Fine i’m happy with this one anyways uh, please consider subscribing i’m. Almost at the 500 subscriber marks i’m super grateful for you, guys, uh keeping up with me on my rc journey and yeah lots more fun stuff to come here.