✅ Does MAKING a HOLE in your RC Car tyre allow water & dirt to come out? Does it help with balance?

是的, i know i’ve been doing a lot of tires lately, but this is for good reason because it follows on for the other one. Have you ever noticed that the tires make this sound and that’s, because somewhere here you can see? Let me put this light on. Maybe you’ll see a little bit better, see there’s a little oil in there there you go see that one, if it wasn’t shaking so much and that there that that there is designed to allow moisture out and air out, because you can imagine if you didn’t – have That there, these would just be ultra bouncy. 然而, it is a flawed design. Apparently i think it could be, but i’ve not experienced it myself. 然而, because it’s on the sort of the inner edge once it fills up with water and once it fills up with sand and dust and gunk, you then accelerate, and it all just goes flying to the outer edge and it’s got nowhere to go. You see that which makes a lot of sense. So there’s been several suggestions on how to rectify this issue and i’m going to try one of them out today. What it is, is you take your handy little drill, you drill a hole and then obviously, as you’re, accelerating everything escapes out now. Why would you want to do this? What you know what’s the benefit of it? 嗯, you can imagine if you’ve got loads of sand in one of your tires and then you’ve added some moisture to it as well, 水.

It could all sort of catch in one side and as you’re, accelerating it’s really imbalanced, and i have seen that but i’ve. Never ever caught enough sand in it to cause an issue. The moisture i definitely had because i’ve driven through puddles and it’s definitely filled up with water, but then i’ve just left it for a couple of days, but that doesn’t remove the sand. Of course it doesn’t. So we’ve all seen these tyres. These are from the wl toys, the three cars and we all know what they do. So i don’t really think i need to do it before or do i yeah let’s do it before, because we need to put some sand in there. So i’m gon na put some sand and some water in there. So we can see how imbalanced it is unbalanced. Imbalanced under yeah, 好, um and then we’ll obviously drill a hole and see if it comes out or not it’s going to be a nice, simple, video and before people say how is sand gon na get in there because as you’re accelerating it’s not possible? 嗯, 然后, how did this dust get here if there’s dust there? 嗯, then they can get sand there so let’s see. If i can get some of this in there all i’m doing is sort of rubbing it over the hole like saw. What we’ll do then, seeing as i’ve got the two tires? I’Ve kept them similar, but i’ll obviously run one at the front one at the back, because usually the one at the front or a little bit sort of thinner we’ll have one that has nothing in it.

No we’ll have one that’s got the sand and the water in it one with a sand in the water, but this one will have a hole in it to let everything escape. How much of this should i put in, should i attempt to put in all of it the worst case scenario, so what they’re saying is once you’ve um drilled your hole on the outside? You then fill the hole with a little bit of tape. This side on the inner side, and that will just basically stop it filling up now. You obviously will still get moisture in there because, as you drive through a puddle water will go in, but it’s sort of self regulating, isn’t it it’s self self cleaning. Because then, as you accelerate, it will just pour out again. 哦, that is the theory. This is why we’re here, ladies and gents right, let me just put that there for now you can see that i’ve got. Can we hear no, we can’t, but what i will do is make sure loads of water in there. I may as well. Do the other one while i’m. Here no, i need to put some sand in first. 好, just leave that one there for a sec. Come back here, i’ll do the same with this one just get some sand in there i’ll blast through this one fast forward. 来吧. There was some comments about that’s what the foam’s there for to stop this happening so much because it will stop some sun.

Getting in there, but it doesn’t stop all. Does it oh yeah. You can feel it’s slightly imbalanced already. 实际上, let me just show you the sticker that i just bought now. Obviously i do not condone violence. 然而, if this is your little brother and that’s a squirt gun, then i think that will make your point. 好, now let’s get some more sand. Applause and okay uh a very, very big. Thank you to you all for your birthday, congratulations and kind wishes. I got hundreds of them, so thank you so much. You showed me the love and i really do appreciate it and also thank you to those that said. Happy birthday to my father as well, very kind of yet and good luck to you all with the competition and thank you once again to banggood right now. I think that’s more than enough what we’ll do is we shall put them back in the water. I just want to make sure that we’ve got loads of water in there squirrels man, all i’m going to do is put them onto the 14401. I have by the side here and we’ll see how imbalanced they are unbalanced. 是的, i’m gon na have to google that afterwards right, you can see the fact that they’re not floating so much now. 哦, 哦, that doesn’t feel so good right. 好, now i’m, not gon na drill the hole now because i’m gon na actually run them on the car to make sure that the outside is nice and dry so that when we actually drill the hole, we’ll be able to see nice and easily um that the Fluid and sand is coming out, so i think for now i shall press pause on both cameras get set up outside and then we’ll see how we get on see you in a minute.

好, welcome to outside sorry about the wind today. It is very, very windy. Right let’s get some of the sand off cool right. This is again. This is worst case scenario i’m, not saying that this will happen, because it will, to a certain degree, pour out anyway again. My servo is disconnected power on Music let’s see how unbalanced they are. I’M gon na get out of the way for a second, because those first few blasts are gon na, be just water. 好, ready just make sure we’re on full speed. 好, let’s hit let’s see if we can get um some moisture out of these uh. 是的, right move that out of the way you have to excuse my shoes they’re, my comfortable ones see that line of i’m gon na go and get some papers, so you can see easily. 实际上, i think the box would be better if i do it. 不, no we’ll see won’t, we, whether it’s, that one or that one Music Laughter, wow jesus there you go. Ladies and gents, does it help get it out? Hell yeah, 我的上帝. The other way to do this is with the tip of a soldering iron just quickly. In and out again, that’s very cool don’t, if you do this, make sure that you do uh you tape over the inner i’m going to put it into slow motion for you now, because this one is definitely ballooning further out than this. One is because obviously this one has the fluid and the sand out now: 音乐, my Music, 好, you can definitely see the this.

One is ballooning, a lot more Music come on. You see the fluid there yeah you saw it coming out onto slo mo again: 音乐, 音乐, 音乐, 所以音乐, 音乐, 音乐. 再次, i don’t contain condom violence. 好, welcome back to the blue man, everybody um! 嗯, what can i say? Does it work? Jesus? 是的, of course it does, did you not see that and they are empty? So will i be doing this to every one of my tires? I tell you one thing that i don’t know: if i’ll be doing, will i be putting a little bit of tape on the inside i’m? Not sure i’m, 不确定, maybe because you’ve got the foam there. If you still get water there, it could take a while for the the the sort of the mind you, mud and stuff could still stick on the inside there couldn’t it. Yes all right, 是的! I will seal that because you’re still going to have your and this one, obviously doesn’t have it. I can’t find it anyway, you’re still going to have the hole there to let the air on the mud and whatnot out. 所以, 是的, i will seal on it on the inside i’m, going to use a little bit of the gorilla tape. Uh no i’m, not sponsored by them. Just see you now um. So wherever the hole is here, i’ll put a little bit of tape here, but i will also put a little bit of tape the other side, just to make sure that i keep it balanced and there you go what a nice simple fix mod again.

谢谢. So much to those that suggested it. It was suggested to me several months ago as well and it’s, been on my to do list for a video. But it ties in well with what we were doing with the gorilla tape on the inside to stop the balloon, because you will still be able to drill through, even with the the gorilla tape on the inside, so that’s really important.