Fortin Evo T Harness All in One Remote Start programming and set up

This one here is an Evo fo, our t1. It which is made for the Fords it’s a tea harness all in one evo, with a tea harness to do the remote start. All in one package. This here is the other half there. You can see the Ford harness the data plug that plugs into the Evo and first things. 第一, you have to do what you have to do with this is, if you just bite out of the box and using it for the application is designed for you, don’t need to really follow any of this. 然而, if you want to customize and change any of the settings, this is how you do it first thing in the new is get your flash link to this. Is the flash let’s say that they’re making replace the original flash light module that they used to make and by the way, if you have the older flash like you can go to, I far CA and they will exchange this for you at no charge to get The later version, so first thing we want to do – is plug it in to the flash link the 4 pin data to data plug which is going to plug into your bypass. 就我而言, my Evo leave this disconnected after you install the firmware which I’ll talk. I’Ll touch on briefly and then you’re going to want to plug in your Evo once you have that done, I’ll show you how it works right here.

This is on my screen. This is what the new icon looks like this replaced the older one, which I actually still have it’s right here in my recycle bin. So the old one looked just like that, with a little flash link icon with a little arrow to it. The new one has more like a bubble type of look to it, and that is the new one. So if you try to plug in your old one, you still utilize neill firmware it’ll automatically prompt you to run the new and run and install the new software. After you do that do what I did, because I call the my ass and why it wasn’t working he said just reboot, your computer turn it back on it’ll, start working and lo and behold that’s exactly how it works. So then I’ll show you how it works. When you actually want to program your settings, alright, so you now I have my evo fo RT bond or twine on just collpa short plugged into the flashlight double click the flash mcmanager see I don’t know I usually pull screen works but it’s not forgive me now. That’S a couple things you can do if you wanted to update the firmware is on the unit that’s for Ford as it sits. This is how you do it choose a year making model and it will guide you through the rest of the process. Now on line at the bottom, it says connection mode it’s in the bypass it’s all connected.

The bottom will see if I spam you connected now. What you want to do is, in my case, I have a customer actually purchase this and he wants me to change option 15 so on the bottom right, 有, four little buttons once this toggle once this options once it’s flashing, what the last one says quit. So I hit the button that says options now we here these are all of the default settings that’s on a zero. So here are the settings by default from the manufacturer and it’s checked off, which one’s apply, which ones you do not want to apply. It we’re going to leave all this the same, because customers really want to change any of that stuff, but what he does want to do is he wants to change program number 15 set because he’s using it to start the vehicle by hitting block three times or In hit log in log bottom, lock lot of course, and he wants that runtime to be changed. 15 minutes is what he’s looking for that’s, what he paid before so that’s, what he’s going to get and down here some other stuff. Just you could see shutdown and on door open. I read mode buck out the start Jerris it also type in. If you use an RF, get to extend the range right here. Is we plug in type of you using that’s, pretty cool that’s, pretty much it it’s? Not that complicated flash link to you have to purchase you have to download the firmware.

So I using these bypass is very quick. I mean actually once the installation part is is out, is in play that’s almost as fast as it is to actually do this work. So there you go all right, so here we go now I have my evo fo RT, one or fort one out just cold for short plugged into the flash link. Double click the flash Nick manager see, I don’t know I usually pull screen works but it’s not forgive me now, that’s a couple things you can do if you wanted to update the firmware it’s on the unit that’s for Ford as it sits. This is how you do it choose a year making model and it will guide you through the rest of the process. Now on line at the bottom, it says connection mode it’s in the bypass it’s all connected. The bottom will see if I spam you connected now. What you want to do is, in my case I have a customer who actually purchased this. He wants me to change option 15 so on the bottom right, 有, four little buttons once this toggle once this options once it’s flashing, you look the last one says quit, so I hit the button that says options now here. These are all the default settings that’s on this Evo. So here are the settings by default from the manufacturer and it’s checked off, which one’s apply, which ones you do not want to apply.

It we’re going to leave all this the same, because customers really want to change any of that stuff, but what he does want to do is he wants to change program number 15 set because he’s using it to start the vehicle by hitting block three times or You can hit lock a lock button, unlock block, 答案是肯定的, and he wants that runtime to be changed. 15 minutes is what he’s looking for it’s, what he paid before so that’s, what he’s going to get and down here some other stuff. Just you could see shutdown and on door open, hybrid mode lock at the start. There is it also type in if you use an RF jet to extend. The range right here is where you plug in type of you, using that’s, pretty cool that’s, pretty much it it’s, not that complicated flash link to you have to purchase. You have to download the firmware. So I using these bypass is very quick.

[compare_prices_deals]

源