所以今天, i’m going to show you the sg1604 and it’s a drift cars. 四轮, 驱动器的, ready to ride, got led lights and got a tourist lipo included and buy it in gyro. I’Ll show you later so: let’s see what’s inside and you can see. These are the two options: the 1603 very nice truck, love it and it’s the 1604. I got this yeah so come on. Let’S open the box so here’s the car looks very nice and, 照常, the manual and here’s our transmitter and a package full of stuff. But first we’re going to take a deeper look. So let’s take a look in the manual for some specs and all that stuff yeah as usual, all the same stuff: how to drive to be safety and here’s the first one that showed how to work with the gyro, 转向, the trim, the lights and everything. So this is very interesting for us, so let’s go further. Yes and again, here’s uh showed how the job works on your transmitter and what’s going on. I will show you later well that’s interesting. You can read this uh in the manual it’s, very good for you, 是的, some specs and all the stuff and yeah for sure some spare parts and all the same so let’s open our little bag and see what’s inside yeah some tools and some tiny spare parts. Screwdriver clips allen key all the stuff and the charger from the balancer, and it looks very good yeah compared to other ones, 它, bigger and yeah.

我喜欢这些轮辋. I love these tires. So these are the the slick tires. The the hot tires drifting tires. So i would put them on later so here’s our transmitter. It feels super cool, so here’s the the rates for the gyro for the esp, and here it is for the d ring trim and the steering dual rates so here’s. The throttle river steering reverse the tx and rx sign so here’s the off on switch, and here are the three positions for the lights. There are three positions and again for the lights, put it on and off super nice. 真. 我喜欢. It’S very comfortable it’s huge is big. It feels nice it’s very impressed really so guys. Let’S take a look on our car, so here on the white rims on the normal wheels on the all terrain, wheels they’re out of rubber and let’s. Take a look inside. Yeah looks very nice on the first look, so jst plugs yeah and you know the light ports for the front and for the tail light. So the sg1603 has also taillights five way: observable here’s the motor wires and here yes, j steep, like i like jst like i had a lot of stuff with them: yeah guys and 2s 1200 毫安普, lipo that’s really cool really. 那么,我们有什么? 拿? A look inside it’s, 金属驱动器, shaft, really nice out of mouse. 四轮, drive for sure and works good.

真, 哦, like it should. 这里. The suspension is very hard but uh anyway, i’m going to change it to real real good uh oil shock. Absorbers i’ll show it to you in the next steps on this video and so overall, 是的, 380 刷电机. What a sign so hot don’t touch it and yeah here’s the servo really nice. Everything looks good, 真, first looks so we’re going to see what we can do i’m going to convert it to brushless, 我认为, but uh we will see. We use the power switch so guys let’s take a look under the wheels. So what we have so here’s uh it’s eight millimeter hex and looks like a break really nice love it and yeah. So when we’ve done this let’s change the wheels to the drift tires like them very much ah looks super nice really they are a bit smaller. In the diameter and for sure totally different than driving styleand i had some nice blue hex nuts, so the first parts to change guys. 所以伙计们 – and here are our oil shockabsorbers they’re from high boxing from the 18858 模型, as you can see in the rear they fit super perfect and in the front um they’re a little bit too large. So i think it’s in the real, 喜欢 55 and in the front 50 毫米, but no problem. We will lower them like a normal car, so that’s let’s get rid of the stock absorbers.

So we need to change. We have to put out these ball head screws because we can’t fit in the the new ones, even if we take this these things out in the absorbers anyway, no problem bullet screws out the included screws in, and i put on two washers on above. Let me show you so that it can fit good, otherwise it will come too much against the shock tower. 所以伙计们 – and here are the washesjust need only two of them and that’s all so then it’s perfect. You can see two yeah guys so let’s lower the spring yeah perfect. So we only need to make the adjust the shock absorbers a little bit harder and it works perfect, like it should yeah i’m very happy about this yeah guys. Now let me show you how the gyro works. The adjustment from the gyro so put the transmitter on power, the car and i will show you so first, we pull it on full power and you see this so that’s how it works. So now that let us put it out totally, you see there’s no movement and now we’re going to make it in the middle a little bit more. So you can see the movement is not that much so that’s how it works guys. 所以伙计们, let me show you from the jst plug, so you don’t need to solder everything so here’s the xt60 to jst plug. So you can use your xt60 lipos to use lipos or whatever and uh here’s.

也, i have a lot of t plug so here’s. The xd60 to t plug connector and i can use my all my tools, lipos here so that’s perfect, you don’t don’t, need to solder all the time you can use all your lipo. 所以, 正如你所看到的, this uh 1200 milliamp in the newest 1600 milliamp now it’s time for speed, run and check 28 kilometers an hour guys yeah, 不错, so now let’s check our jumps and our drives and drifts. 谢谢, uh wow yeah guys. I love this car so much really drives so nice, 所以呃。, the oil shock absorber upgrade works perfect, as you can saw before in the jumps. I need to adjust the rear a little bit it’s a little bit too hard and i’m driving all the time on the normal road tires to see how it behaves. But later i will put on the the drive in the drifting tires, the black one, black rims. So and i won’t go and make a nice video i’m trying to make it like a game cannon like a cam block, style video and it drifts then more for sure so anyway guys. I hope you liked the video and hope to see you next week.

https://www.youtube.com/watch?v=4E8Y4C6sTMk