This is a really heavy truck, so this was sent to me to review the perfect opportunity to switch out to this one i’m going to install it and then take it out and give it some testing. It will accept it’s, a 35 kilogram, waterproof all metal gear, coreless digital servo, and it will take anywhere from 5 volts to 7.4 volts. So it should be a nice, strong, servo and should be more than enough to move the front end of this heavy truck. I will leave a link for this server in the description i’m just going to get it put in there. We’Ll have a quick look at it and just get it out and run it so there’s the servo installed, and it works really. Nice great response, speed and strong, well i’ll, just grab it by a wheel here and turn the uh. I look at that, so that should really really get the job done. So let’s get this thing out and uh give it a try all right. Let’S get this thing good and tested. So this course is pretty good for that it uh the slats really test the tires they get stuck down in there it’s hard for them to turn. Now this wood’s still pretty slick, there’s still some snow on the ground, so hopefully we get enough traction to climb it. It gets pretty challenging in the winter. Now i did run this uh servo for about a week already.
I took it to uh florida with me to uste and tried it on their trails there. Now the trails weren’t overly taxing on the servo that’s. Why i figured i’d wait till i got back here to do a full test. All right, i didn’t know if we were gon na make it up there for a second should be a pretty good angle to see the servo working got plenty plenty of power when it’s standing still, we can get it down here in a bind somewhere even bound Up against that piece of board, it’s still able to turn fairly impressed with this servo. So far i mean it’s really got power and authority where i need it to all right, there’s a lot of turning around this spot to make it through, if i’m, going around the outside a lot of different little terrain pieces for it to get stuck on still Got pretty good power, no problems up through there we’ll, take it up the spiral and call the test complete all right, let’s see if we can get turned in up this spiral. That’Ll be a lot. Three point turn type stuff going on here might turn to more. Like a 12 point, turn by time, i’m done: hey plenty of power. Applause, awesome um! I think this server works, pretty daggone good, uh, i’m gon na leave a link for it. Uh i’m glad it was sent to me. That’S really awesome test and this one.
It works great and i’m, probably gon na, be using this in more of my rigs. My rigs are all really heavy. This thing weighs a ton, especially with that interior. Well, thanks a lot for watching. I hope this was uh, helpful and insightful on on this servo.